0755-23179541 
sales@oyii.net
Simplex Patch Cord
Optic Fiber Patch Cord
Simplex Patch Cord
Product Features
Low insertion loss.
High return loss.
Excellent Repeatability, exchangeability, wearability and stability.
Constructed from high quality connectors and standard fibers.
Applicable connector: FC, SC, ST, LC, MTRJ and etc.
Cable material: PVC, LSZH, OFNR, OFNP.
Single-mode or multiple-mode available, OS1, OM1, OM2, OM3, OM4 or OM5.
Cable size: 0.9mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm.
Environmentally Stable.
Technical Specifications
| Parameter | FC/SC/LC/ST | MU/MTRJ | E2000 | ||||
| SM | MM | SM | MM | SM | |||
| UPC | APC | UPC | UPC | UPC | UPC | APC | |
| Operating Wavelength (nm) | 1310/1550 | 850/1300 | 1310/1550 | 850/1300 | 1310/1550 | ||
| Insertion Loss (dB) | ≤0.2 | ≤0.3 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 |
| Return Loss (dB) | ≥50 | ≥60 | ≥35 | ≥50 | ≥35 | ≥50 | ≥60 |
| Repeatability Loss (dB) | ≤0.1 | ||||||
| Interchangeability Loss (dB) | ≤0.2 | ||||||
| Repeat Plug-pull Times | ≥1000 | ||||||
| Tensile Strength (N) | ≥100 | ||||||
| Durability Loss (dB) | ≤0.2 | ||||||
| Operating Temperature (℃) | -45~+75 | ||||||
| Storage Temperature (℃) | -45~+85 | ||||||
Applications
Telecommunication system.
Optical communication networks.
CATV, FTTH, LAN.
NOTE: We can provide specify patch cord which required by customer.
Fiber optic sensors.
Optical transmission system.
Test equipment.
Packaging Information
SC-SC SM Simplex 1M as a reference.
1 pc in 1 plastic bag.
800 specific patch cord in carton box.
Outer carton box size: 46*46*28.5cm, weight: 18.5kg.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-FAT08 Terminal Box
The 8-core OYI-FAT08A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
-
OPGW Optical Ground Wire
The central tube OPGW is made of stainless steel (aluminum pipe) fiber unit in the center and aluminum clad steel wire stranding process in the outer layer. The product is suitable for the operation of single tube optical fiber unit.
-
FTTH Suspension Tension Clamp Drop Wire Clamp
FTTH suspension tension clamp fiber optic drop cable wire clamp is a type of wire clamp that is widely used to support telephone drop wires at span clamps, drive hooks, and various drop attachments. It consists of a shell, a shim, and a wedge equipped with a bail wire. It has various advantages, such as good corrosion resistance, durability, and good value. Additionally, it is easy to install and operate without any tools, which can save workers’ time. We offer a variety of styles and specifications, so you can choose according to your needs.
-
SFP-ETRx-4
The ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
-
Loose Tube Armored Flame-retardant Direct Burie...
The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)
-
Anchoring Clamp PA600
The anchoring cable clamp PA600 is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 3-9mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
