0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FAT H08C
Fiber Optic Distribution Box 8 Core
OYI-FAT H08C
Product Features
1.Total enclosed structure.
2.Material: ABS, wet-proof, water-proof ,dust proof, anti-aging, protection level up to IP65.
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage distribution ... etc all in one.
4.Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor, installation, easy maintenance.
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6.Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor uses.
Configuration
|
MateriaI |
size |
Max capacity |
Nos of PLC |
Nos of Adaptor |
weight |
ports |
|
Strengthen ABS |
A*B*C(mm) 295*185*110 |
Splice 8 Fibers (1trays,8 core/tray) |
/ |
8 pcs of SC(max) |
1.01kg |
2 in 8 out |
Standard Accessories
Screw: 4mm*40mm 4pcs
Expansion bolt: M6 4pcs
Cable tie: 3mm*10mm 6pcs
Heat-shrink sleeve: 1.0mm*3mm*60mm 16pcs
key: 1pcs
hoop ring: 2pcs
Packaging Information
|
PCS/CARTON |
Gross Weight（Kg） |
Net Weight（Kg） |
Carton Size（cm） |
Cbm（m³) |
|
10 |
11 |
10 |
62*32*40 |
0.079 |
Inner Box
Outer Carton
-
OYI-FAT16D Terminal Box
The 16-core OYI-FAT16D optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. -
OYI-OCC-D Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user. -
Non-metallic Central Tube Access Cable
The fibers and water-blocking tapes are positioned in a dry loose tube. The loose tube is wrapped with a layer of aramid yarns as a strength member. Two parallel fiber-reinforced plastics (FRP) are placed on the two sides, and the cable is completed with an outer LSZH sheath. -
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex. -
OYI-ATB02B Desktop Box
OYI-ATB02B double-port terminal box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. It uses embedded surface frame, easy to install and disassemble, it is with protective door and dusty free. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall. -
Loose Tube Non-metallic Heavy Type Rodent Prote...
Insert the optical fiber into the PBT loose tube, fill the loose tube with waterproof ointment. The center of the cable core is a non-metallic reinforced core, and the gap is filled with waterproof ointment. The loose tube (and filler) is twisted around the center to strengthen the core, forming a compact and circular cable core. A layer of protective material is extruded outside the cable core, and glass yarn is placed outside the protective tube as a rodent proof material. Then, a layer of polyethylene (PE) protective material is extruded.(WITH DOUBLE SHEATHS)
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
