0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-ATB02D Desktop Box
Optic Fiber FTTH Box 2 Cores Type
OYI-ATB02D Desktop Box
Product Features
1.IP-55 Protection level.
2.Integrated with cable termination and management rods.
3.Manage fibers in a reasonable fiber radius(30mm) condition.
4.High quality industrial anti-aging ABS plastic material.
5.Suitable for the wall mounted installation.
6.Suitable for FTTH indoor application.
7.2 port cable entrance for drop cable or patch cable.
8.Fiber adapter can be installed in the rosette for patching.
9.UL94-V0 fire-retardant material can be customized as option.
10.Temperature: -40 ℃ to +85 ℃.
11.Humidity: ≤ 95% (+40 ℃).
12.Atmospheric pressure: 70KPa to 108KPa.
13.Box structure: The two-port desktop box consists mainly of the cover and the bottom box. The box structure is shown in the figure.
Specifications
|
Item No. |
Description |
Weight (g) |
Size (mm) |
|
OYI-ATB02D |
For 2pcs SC Simplex Adapter |
78 |
105*80*20 |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White or customer’s request |
||
|
Waterproof |
IP55 |
||
Applications
1.FTTX access system terminal link.
2.Widely used in FTTH access network.
3.Telecommunication networks.
4.CATV networks.
5.Data communications networks.
6.Local area networks.
The Installation Instruction Of The Box
1. Wall installation
1.1 According to the bottom box mounting hole distance on the wall to play two mounting holes, and knock into the plastic expansion sleeve.
1.2 Fix the box to the wall with M8 × 40 screws.
1.3 Check the installation of the box, qualified to cover the lid.
1.4 According to the construction requirements of the introduction of outdoor cable and FTTH drop cable.
2. Open the box
2.1 Hands were holding the cover and the bottom box, a little hard to break out to open the box.
Packaging Information
1. Quantity: 10pcs/ Inner box, 200pcs/Outer box.
2.Carton Size: 49*49*27cm.
2.N.Weight: 15.6kg/Outer Carton.
4.G.Weight: 16.6kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
OYI-IW series
Indoor Wall-mount Fiber Optic Distribution Frame can manage both single fiber and ribbon & bundle fiber cables for indoor using. It is an integrated unit for fiber management, and can be used as distribution box， this equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applying cable to your existing systems without any modification or additional work. Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters. and large working space to integrate the pigtails, cables and adapters. -
OYI-FOSC-D108M
The OYI-FOSC-M8 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
Central Loose Tube Stranded Figure 8 Self-suppo...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. Then, the core is wrapped with swelling tape longitudinally. After part of the cable, accompanied by the stranded wires as the supporting part, is completed, it is covered with a PE sheath to form a figure-8 structure. -
Stainless Steel Banding Strapping Tools
The giant banding tool is useful and of high quality, with its special design for strapping giant steel bands. The cutting knife is made with a special steel alloy and undergoes heat treatment, which makes it last longer. It is used in marine and petrol systems, such as hose assemblies, cable bundling, and general fastening. It can be used with the series of stainless steel bands and buckles. -
Anchoring Clamp OYI-TA03-04 Series
This OYI-TA03 and 04 cable clamp is made of high-strength nylon and 201 stainless steel, suitable for circular cables with a diameter of 4-22mm. Its biggest feature is the unique design of hanging and pulling cables of different sizes through the conversion wedge, which is firm and durable. The optical cable is used in ADSS cables and various types of optical cables, and is easy to install and use with high cost-effectiveness. The difference between 03 and 04 is that 03 steel wire hooks from the outside to the inside, while 04 type wide steel wire hooks from the inside to the outside
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
