0755-23179541 
sales@oyii.net.png)
8618926041961
Male to Female Type SC Attenuator
Fiber Optic Attenuator
Male to Female Type SC Attenuator
Product Features
Wide attenuation range.
Low return loss.
Low PDL.
Polarization insensitive.
Various connector types.
Highly reliable.
Specifications
|
Parameters |
Min |
Typical |
Max |
Unit |
|
|
Operating Wavelength Range |
1310±40 |
mm |
|||
|
1550±40 |
mm |
||||
|
Return Loss |
UPC Type |
50 |
dB |
||
|
APC Type |
60 |
dB |
|||
|
Operating Temperature |
-40 |
85 |
℃ |
||
|
Attenuation Tolerance |
0~10dB±1.0dB |
||||
|
11~25dB±1.5dB |
|||||
|
Storage Temperature |
-40 |
85 |
≥50 |
||
Note: Customized configurations is available upon request.
Applications
Optical fiber communication networks.
Optical CATV.
Fiber network deployments.
Fast/Gigabit Ethernet.
Other data applications requiring high transfer rates.
Packaging Information
1 pc in 1 plastic bag.
1000 pcs in 1 carton box.
Outside carton box size: 46*46*28.5 cm, Weight: 18.5kg.
OEM service is available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel. -
Drop Cable Anchoring Clamp S-Type
Drop wire tension clamp s-type, also called FTTH drop s-clamp, is developed to tension and support flat or round fiber optic cable on intermediate routes or last mile connections during outdoor overhead FTTH deployment. It is made of UV proof plastic and a stainless steel wire loop processed by injection molding technology. -
OYI-FOSC-D109H
The OYI-FOSC-D109H dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 9 entrance ports on the end (8 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc. -
OYI-ATB06A Desktop Box
OYI-ATB06A 6-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall. -
OYI-FAT48A Terminal Box
The 48-core OYI-FAT48A series optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT48A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage area. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 3 cable holes under the box that can accommodate 3 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to meet the expansion needs of the box.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
