Jacket Round Cable

Indoor/Outdoor Double

Jacket Round Cable 5.0mm HDPE

Fiber optic drop cable, also known as double sheath fiber drop cable, is a specialized assembly utilized for transmitting information via light signals in last – mile internet infrastructure projects. These optic drop cables typically incorporate one or multiple fiber cores. They are reinforced and safeguarded by specific materials, which endow them with outstanding physical properties, enabling their application in a wide range of scenarios.

Product Detail

FAQ

Product Tags

Product Description

Fiber optic drop cable also called double sheath fiber drop cable is an assembly designed to transfer information by light signal in last mile internet constructions.
Optic drop cables usually consist of one or more fiber cores, reinforced and protected by special materials to have superior physical performance to applied in various applications.

Fiber Parameters

Cable Parameters

Items		Specifications
Fiber count		1
Tight-buffered Fiber	Diameter	850±50μm
	Material	PVC
	Color	Green or Red
Cable subunit	Diameter	2.4±0.1 mm
	Material	LSZH
	Color	White
Jacket	Diameter	5.0±0.1mm
	Material	HDPE, UV resistance
	Color	Black
Strength member		Aramid Yarn

Mechanical and Environmental Characteristics

Items	Unite	Specifications
Tension (Long Term)	N	150
Tension (Short Term)	N	300
Crush（Long Term）	N/10cm	200
Crush（Short Term）	N/10cm	1000
Min. Bend Radius（Dynamic）	mm	20D
Min. Bend Radius（Static）	mm	10D
Operating Temperature	℃	-20～+60
Storage Temperature	℃	-20～+60

PACKAGE AND MARK

PACKAGE
Not allowed two length units of cable in one drum, two ends should be sealed, two ends should be
packed inside drum, reserve length of cable not less than 3 meters.

MARK

Cable shall be permanently marked in English at regular intervals with the following information:
1.Name of manufacturer.
2.Type of cable.
3.Fiber category.

TEST REPORT

Test report and certification supplied on request.

Products Recommended

OYI-FAT 24C

This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.

VIEW MORE
OYI B Type Fast Connector

Our fiber optic fast connector, OYI B type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, with a unique design for the crimping position structure.

VIEW MORE
OYI-ATB08B Terminal Box

OYI-ATB08B 8-Cores Terminal box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTH (FTTH drop optical cables for end connections) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.

VIEW MORE
Module OYI-1L311xF

OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

VIEW MORE
OYI-ATB04A Desktop Box

OYI-ATB04A 4-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.

VIEW MORE
SFP+ 80km Transceiver

PPB-5496-80B is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 11.1Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 80km in 9/125um single mode fiber.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE