0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FOSC-D103M
Fiber Optic Splice Closure
OYI-FOSC-D103M
Product Features
1. High-quality PC, ABS, and PPR materials are optional, which can ensure harsh conditions such as vibration and impact.
2.Structural parts are made of high-quality stainless steel, providing high strength and corrosion resistance, making them suitable for various environments.
3.The structure is strong and reasonable, with a heat shrinkable sealing structure that can be opened and reused after sealing.
4.It is well water and dust-proof, with a unique grounding device to ensure sealing performance and convenient installation.The protection grade reaches IP68.
5.The splice closure has a wide application range, with good sealing performance and easy installation. It is produced with high-strength engineering plastic housing that is anti-aging, corrosion-resistant, high-temperature resistant, and has high mechanical strength.
6.The box has multiple reuse and expansion functions, allowing it to accommodate various core cables.
7.The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber, ensuring a curvature radius of 40mm for optical winding.
8.Each optical cable and fiber can be operated individually.
9.Using mechanical sealing , reliable sealing, convenient operation.
10.The closure is of small volume, big capacity, and convenient maintenance. The elastic rubber seal rings inside the closure have good sealing and sweat-proof performance. The casing can be opened repeatedly without any air leakage. No special tools are required. The operation is easy and simple. An air valve is provided for the closure and is used to check the sealing performance.
11.Designed for FTTH with adapter if needed.
Specifications
|
Item No. |
OYI-FOSC-D103M |
|
|
|
|
Size (mm) |
Φ205*420 |
|
Weight (kg) |
1.8 |
|
Cable Diameter(mm) |
Φ7~Φ22 |
|
Cable Ports |
2 in, 4 out |
|
Max Capacity Of Fiber |
144 |
|
Max Capacity Of Splice |
24 |
|
Max Capacity Of Splice Tray |
6 |
|
Cable Entry Sealing |
Mechanical Sealing By Silicon Rubber |
|
Sealing Structure |
Silicon Rubber Material |
|
Life Span |
More Than 25 Years |
Applications
1.Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.
2.Using communication cable lines overhead, underground, direct-buried, and so on.
Optional Accessories
Standard Accessories
Tag paper: 1pc
Sand paper: 1pc
spanner: 2pcs
Sealing rubber strip: 1pc
Insulating tape: 1pc
Cleaning tissue: 1pc
Plastic plug+Rubber plug: 10pcs
Cable tie: 3mm*10mm 12pcs
Fiber protective tube: 3pcs
Heat-shrink sleeve: 1.0mm*3mm*60mm 12-144pcs
Pole accessories: 1pc（Optional Accessories ）
Aerial accessories: 1pc（Optional Accessories ）
Pressure testing valve: 1pc（Optional Accessories ）
Optional Accessories
Pole mounting（A）
Pole mounting（B）
Pole mounting（C）
Wall mounting
Aerial mounting
Packaging Information
1. Quantity: 8pcs/Outer box.
2.Carton Size: 70*41*43cm.
3.N.Weight: 14.4kg/Outer Carton.
4.G.Weight: 15.4kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Flat Twin Fiber Cable GJFJBV
The flat twin cable uses 600μm or 900μm tight buffered fiber as the optical communication medium. The tight buffered fiber is wrapped with a layer of aramid yarn as a strength member. Such a unit is extruded with a layer as an inner sheath. The cable is completed with an outer sheath.(PVC, OFNP, or LSZH) -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
OYI-FOSC-H03
The OYI-FOSC-H03 Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 3 entrance ports and 3 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
Ear-Lokt Stainless Steel Buckle
Stainless steel buckles are manufactured from high quality type 200, type 202, type 304, or type 316 stainless steel to match the stainless steel strip. Buckles are generally used for heavy duty banding or strapping. OYI can emboss customers’ brand or logo onto the buckles. The core feature of the stainless steel buckle is its strength. This feature is due to the single stainless steel pressing design, which allows for construction without joins or seams. The buckles are available in matching 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″ widths and, with the exception of the 1/2″ buckles, accommodate the double-wrap application to solve heavier duty clamping requirements. -
ADSS Suspension Clamp Type A
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability and can extend the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion. -
OYI-ATB04B Desktop Box
OYI-ATB04B 4-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
