0755-23179541 
sales@oyii.net
GJYFKH
Indoor Optic Cable
GJYFKH
Product Description
With the continuous advancement of optical communication to end users, in the equipment room and indoor access and integrated cabling, higher requirements have been put forward for the performance indexes such as anti-flattening, anti-stretching, anti-rodent biting, flame retardant, protection-free direct deployment and the structure size of optical cables and fiber optic patch cords. Flexible fiber optic cable is to adapt to this market demand for the emergence of products. This cable not only maintains the ordinary indoor cable soft, lightweight, small size, but also has the advantages of anti-flattening, impact resistance, rodent bite resistance, and can be extended to outdoor use.
1.Tight Buffer Color Code
2. Performance Parameters of the Optical Fiber
2.1 Single Mode Fiber
2.2 Multi Mode Fiber
3. Mechanical and Environmental Performance of the Cable
4. FIBER OPTIC CABLE BENDING RADIUS
Static bending: ≥ 10 times than cable out diameter.
Dynamic bending: ≥ 20 times than cable out diameter.
5. PACKAGE AND MARK
5.1 PACKAGE
Not allowed two length units of cable in one drum, two ends should be packed inside drum, reserve length of cable not less than 1 meter.
5.2 MARK
Cable Mark: Brand, Cable type, Fiber type and counts, Year of manufacture and Length marking.
6. TEST REPORT
Test report and certification supplied on request.
-
OYI-FAT24B Terminal Box
The 24-cores OYI-FAT24S optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
-
SFP-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via 12C, allowing access to all PHY settings and features.
The OPT-ETRx-4 is compatible with 1000BASE-X auto-negotiation, and have a link indication feature. PHY is disabled when TX disable is high or open.
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
Dead end Guy Grip
Dead-end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines. The reliability and economic performance of the product are better than the bolt type and hydraulic type tension clamp that are widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminum clad steel.
-
Duplex Patch Cord
OYI fiber optic duplex patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors on each end. Fiber optic patch cables are used in two major application areas: connecting computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, DIN and E2000 (APC/UPC polish) are available. Additionally, we also offer MTP/MPO patch cords.
-
Outdoor Self-supporting Bow-type drop cable GJY...
The optical fiber unit is positioned in the center. Two parallel Fiber Reinforced (FRP/steel wire) are placed on the two sides. A steel wire (FRP) is also applied as the additional strength member. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen(LSZH) out sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
