0755-23179541 
sales@oyii.net.png)
8618926041961
Anchoring Clamp PA1500
Hardware Products Overhead Line Fittings
Anchoring Clamp PA1500
Product Features
Good anti-corrosion performance.
Abrasion and wear resistant.
Maintenance-free.
Strong grip to prevent the cable from slipping.
Body is cast of nylon body, it’s lightly and convenient to carry outside.
Stainless steel wire has guaranteed firm tensile force.
Wedges are made of weather resistant material.
The installation does not require any specific tools and the operating time is drastically reduced.
Specifications
| Model | Cable Diameter (mm) | Break Load (kn) | Material |
| OYI-PA1500 | 8-12 | 6 | PA, Stainless Steel |
Installation Instructions
Attach the clamp to the pole bracket using its flexible bail.
Place the clamp body over the cable with the wedges in their back position.
Push on the wedges by hand to initiate the gripping onto the cable.
Check the correct positioning of the cable between the wedges.
When the cable is brought to its installation load at the end pole, the wedges move further into the clamp body.
When installing a double dead-end leave some extra length of cable between the two clamps.
Applications
Hanging cable.
Propose a fitting covering installation situations on poles.
Power and overhead line accessories.
FTTH fiber optic aerial cable.
Packaging Information
Quantity: 50pcs/Outer box.
Carton Size: 55*41*25cm.
N.Weight: 20kg/Outer Carton.
G.Weight: 21kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-NOO2 Floor-Mounted Cabinet
-
Jacket Round Cable
Fiber optic drop cable also called double sheath fiber drop cable is an assembly designed to transfer information by light signal in last mile internet constructions.Optic drop cables usually consist of one or more fiber cores, reinforced and protected by special materials to have superior physical performance to applied in various applications -
ABS Cassette Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
Anchoring Clamp PA2000
The anchoring cable clamp is of high quality and durable. This product consists of two parts: a stainless steel wire and its main material, a reinforced nylon body that is lightweight and convenient to carry outdoors. The clamp’s body material is UV plastic, which is friendly and safe and can be used in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 11-15mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees Celsius. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests. -
OYI M Type Fast Connector
Our fiber optic fast connector,the OYI M type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation. This product is a hot-melt fiber optic connector dedicated to FTTH (Fiber to the Home). It use sheat- shrinkable sleeves to fuse and fix fiber cores, delivering loss and better lower fusion stability than mechanical cold splices. All complete accessories separately packed in a transparent blister box with full accessory sets included.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
