0755-23179541 
sales@oyii.net
Anchoring Clamp JBG Series
Hardware Products Overhead Line Fittings
Anchoring Clamp JBG Series
Product Features
Good anti-corrosion performance.
Abrasion and wear resistant.
Maintenance-free.
Strong grip to prevent the cable from slipping.
The clamp is used to fix the line at the end bracket suitable for the type self-supporting insulated wire.
Body is cast of corrosion resistant aluminum alloy with high mechanical strength.
Stainless steel wire has guaranteed firm tensile force.
Wedges are made of weather resistant material.
The installation does not require any specific tools and the operating time is drastically reduced.
Specifications
| Model | Cable Diameter (mm) | Break Load (kn) | Material | Packing Weight |
| OYI-JBG1000 | 8-11 | 10 | Aluminum Alloy+Nylon+Steel Wire | 20KGS/50pcs |
| OYI-JBG1500 | 11-14 | 15 | 20KGS/50pcs | |
| OYI-JBG2000 | 14-18 | 20 | 25KGS/50pcs |
Installation Instruction
Applications
These clamps will be used as cable dead-ends at end poles (using one clamp). Two clamps can be installed as double dead-ends in the following cases:
At jointing poles.
At intermediate angle poles when the cable route deviates by more than 20°.
At intermediate poles when the two spans are different in lengths.
At intermediate poles on hilly landscapes.
Packaging Information
Quantity: 50pcs/Outer Carton.
Carton Size: 55*41*25cm.
N.Weight: 25.5kg/Outer Carton.
G.Weight: 26.5kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-FOSC-H06
The OYI-FOSC-01H horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, embedded situation, etc. Comparing with a terminal box, the closure requires much stricter requirements of seal. Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure.
The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
OYI-FOSC H12
The OYI-FOSC-04H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS/PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
-
OYI-FATC 16A Terminal Box
The 16-core OYI-FATC 16A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FATC 16A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions,and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 72 cores capacity specifications to accommodate the box’s expansion needs.
-
LGX Insert Cassette Type Splitter
Fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
