0755-23179541 
sales@oyii.net.png)
8618926041961
ADSS Suspension Clamp Type A
Hardware Products Overhead Line Fittings
ADSS Suspension Clamp Type A
The suspension clamp brackets can be used for short and medium spans of fiber optic cables, and the suspension clamp bracket is sized to fit specific ADSS diameters. Standard suspension clamp bracket can be employed with the fitted gentle bushings, which can provide a good support/groove fit and prevent the support from damaging the cable.The bolt supports, such as guy hooks, pigtail bolts, or suspender hooks, can be supplied with the aluminum captive bolts to simplify installation with no loose parts.
This helical suspension set is of high quality and durability. It has many uses and can be used in various places. It is easy to install without any tools, which saves workers' time. It has many features and plays a huge role in many places. It has a good appearance with a smooth surface without burrs. Additionally, it has high temperature resistance, good corrosion resistance, and it is not easy to rust.
This tangent ADSS suspension clamp is very convenient for ADSS installation for spans less than 100m. For larger spans, a ring type suspension or single layer suspension for ADSS can be applied accordingly.
Product Features
Preformed rods and clamps for easy operation.
Rubber inserts provide protection for ADSS fiber optic cable.
High quality aluminum alloy material improves mechanical performance and corrosion resistance.
Evenly distributed stress and no concentrated point.
Enhanced rigidity of installation point and ADSS cable protection performance.
Better dynamic stress bearing capacity with a double-layer structure.
Large contact area with fiber optic cable.
Flexible rubber clamps to enhance self-damping.
Flat surface and round end increase the corona discharge voltage and reduce power loss.
Convenient installation and maintenance free.
Specifications
| Model | Available Diameter Of Cable (mm) | Weight (kg) | Available Span (≤m) |
| OYI-10/13 | 10.5-13.0 | 0.8 | 100 |
| OYI-13.1/15.5 | 13.1-15.5 | 0.8 | 100 |
| OYI-15.6/18.0 | 15.6-18.0 | 0.8 | 100 |
| Other diameters can be made upon your request. | |||
Applications
ADSS cable suspension, hanging, fixing walls, poles with drive hooks, pole brackets, and other drop wire fittings or hardware.
Packaging Information
Quantity: 40pcs/Outer box.
Carton Size: 42*28*28cm.
N.Weight: 23kg/Outer Carton.
G.Weight: 24kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Optic Fiber Terminal Box
Design of hinge and convenient press-pull button lock. -
Central Loose Tube Stranded Figure 8 Self-suppo...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. Then, the core is wrapped with swelling tape longitudinally. After part of the cable, accompanied by the stranded wires as the supporting part, is completed, it is covered with a PE sheath to form a figure-8 structure. -
OPGW Optical Ground Wire
The central tube OPGW is made of stainless steel (aluminum pipe) fiber unit in the center and aluminum clad steel wire stranding process in the outer layer. The product is suitable for the operation of single tube optical fiber unit. -
LC Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable. -
Double FRP reinforced non-metallic central bund...
The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable. -
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
