0755-23179541 
sales@oyii.net.png)
8618926041961
Zipcord Interconnect Cable GJFJ8V
GJFJ8V(H)
Zipcord Interconnect Cable GJFJ8V
Product Features
90um or 600um tight buffer, aramid yarn, soft flame-retardant jacket.
Tight buffer fiber is easy to strip and has excellent flame-retardant performance. Aramid yarn is used as a strength member to give the cable excellent tensile strength.
The figure 8 structure jacket facilitates branching.
The outer jacket material has many advantages, such as being anti-corrosive, anti-water, anti-ultraviolet radiation, flame-retardant, and harmless to the environment.
The all-dielectric structure protects it from electromagnetic interference.
Scientific design with serious processing art. Suited for SM fiber and MM fiber (50um and 62.5um).
Optical Characteristics
| Fiber Type | Attenuation | 1310nm MFD(Mode Field Diameter) | Cable Cut-off Wavelength λcc(nm) | |
| @1310nm(dB/KM) | @1550nm(dB/KM) | |||
| G652D | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| G657A1 | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| G657A2 | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| 50/125 | ≤3.5 @850nm | ≤1.5 @1300nm | / | / |
| 62.5/125 | ≤3.5 @850nm | ≤1.5 @1300nm | / | / |
Technical Parameters
|
Cable Code |
Cable Size （mm） |
Cable Weight （Kg/Km） |
TBF Diameter(μm) |
Tensile Strength（N） |
Crush Resistance（N/100mm） |
Bending Radius（mm） |
||||
|
PVC Jacket |
LSZH Jacket |
Long Term |
Short Term |
Long Term |
Short Term |
Dynamic |
Static |
|||
|
Dx 1.6 |
(3.4±0.4)×(1.6±0.2) |
4.8 |
5.3 |
600±50 |
100 |
200 |
100 |
500 |
50 |
30 |
|
D× 2.0 |
(3.8±0.4)x(2.0±0.2) |
8 |
8.7 |
900±50 |
100 |
200 |
100 |
500 |
50 |
30 |
|
Dx 3.0 |
(6.0±0.4)x(2.8±0.2) |
11.6 |
14.8 |
900±50 |
100 |
200 |
100 |
500 |
50 |
30 |
Application
Duplex optical fiber jumper or pigtail.
Indoor riser level and plenum level cable distribution.
Interconnect between instruments and communication equipment.
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -20℃~+70℃ | -5℃~+50℃ | -20℃~+70℃ |
Standard
YD/T 1258.4-2005, IEC 60794
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
OYI-FOSC-D105H
This product consists of two parts: Stainless Steel Wire and Reinforced nylon body, PA500 anchor clamp is designed to diameter 5mm distribution cable and also fit the various ADSS cable designs (Applicable to 3~9mm ADSS). Anchor clamp is used on dead-end fiber optic cables. FTTH drop cable cable Fitting is easy in installation,Open hook self-locking construction perform easiest installation on pole. Good quality PA500 anchor clamps passed the tensile tests, operation experience with temperatures ranging form -40 degree up to 60 degree test, temperature cycling test, aging test, corrosion resistant test and so on. -
Fiber Optic Cleaner Pen 1.25mm Type
Universal One-Click Fiber Optic Cleaner Pen for 1.25mm LC/MU Connectors (800 cleans) The one-click fiber optic cleaner pen is easy to use and can be used to clean LC/MU connectors and exposed 1.25mm collars in the fiber optic cable adapter. Simply insert the cleaner into the adapter and push it until you hear a “click”. The push cleaner uses a mechanical push operation to push the optical grade cleaning tape while rotating the cleaning head to ensure that the fiber end surface is effective but gentle clean. -
OYI-FOSC-D104H
Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box. -
16 Cores Type OYI-FAT-H16C3 Terminal Box
This 16 Cores fiber optic access termination box is able to hold up to 16 subscribers.It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. The optical distribution box is a solution that facilitates the installation of optical termination in branch networks for FTTH environments. -
SC Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable. -
Air Blowing Mini Optical Fibre Cable
The optical fiber is placed inside a loose tube made of high-modulus hydrolyzable material. The tube is then filled with thixotropic, water-repellent fiber paste to form a loose tube of optical fiber. A plurality of fiber optic loose tubes, arranged according to color order requirements and possibly including filler parts, are formed around the central non-metallic reinforcement core to create the cable core via SZ stranding. The gap in the cable core is filled with dry, water-retaining material to block water. A layer of polyethylene (PE) sheath is then extruded. The optical cable is laid by air blowing microtube. First, the air blowing microtube is laid in the outer protection tube, and then the micro cable is laid in the intake air blowing microtube by air blowing. This laying method has a high fiber density, which greatly improves the utilization rate of the pipeline. It is also easy to expand the pipeline capacity and diverge the optical cable.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
