0755-23179541
sales@oyii.net.png)
8618926041961
1.25Gbps 1550nm 60Km LC DDM
SFP Transceiver
1.25Gbps 1550nm 60Km LC DDM
Zvimiro zveChigadzirwa
1. SFP pakeji ine LC connector.
2. 1550nm DFB laser uye PIN photo detector.
3. Kusvika 60km transmission paSMF.
4. +3.3V magetsi emagetsi rimwe chete.
5. LVPECL inoenderana neinterface yekuisa/kuburitsa data.
6. Kudzivirira kwakaderera kweEMI uye kudzivirira kwakanaka kweESD.
7. mwero wekuchengetedza nelaser IEC-60825 unoenderana nezvinodiwa nemutemo.
8. Inoenderana neRoHS.
9. Kutevedzera zvinodiwa neDigital Diagnostic SFF-8472.
10. Nzvimbo yeChiratidzo Yakaparadzaniswa neKesi.
Kushandiswa
1. 1.25Gb/s 1000Base-LXEthernet.
2. Dual Rate 1.06 / 2.125 Gb/s Fiber Channel.
Mareti Epamusoro-soro:
| Paramita | Chiratidzo | Chishoma | Zvakanakisa | Zviyero |
| Tembiricha Yekuchengetedza | Tst | -40 | +85 | ℃ |
| Kugovera Voltage | Vcc | 0 | +3.6 | V |
| Hunyoro Hunoshanda | RH | 5 | 95 | % |
Nzvimbo Yekushanda:
| Paramita | Chiratidzo | Minimum | Zvakajairika | Max | Zviyero |
| Kugovera Voltage | Vcc | 3.15 | 3.3 | 3.45 | V |
| Kupisa Kwekesi Rekushanda | Tc | 0 |
| +70 |
|
| Kuparadza Simba |
|
|
| 1 | W |
| Mwero weData |
|
| 1.25 |
| Gbps |
Hunhu hweOptical
(Kupisa Kunoshanda Kwemhepo 0℃ kusvika +70℃, Vcc =3.3 V)
| Paramita | Chiratidzo | Zvishoma. | Taipa. | Max. | Zviyero |
| Chinotumira Chikamu | |||||
| Urefu hweMafungu epakati | λo | 1540 | 1550 | 1560 | nm |
| Upamhi hweSpectral (RMS) | △λ | - | - | 1 | nm |
| Avhareji Yesimba Rekuburitsa | Po | -5 | - | 0 | dBm |
| Chiyero cheKupera | Er | 8 | - |
| dB |
| Kukwira/Kudonha Nguva (20%~80%) | Tr/Tf |
|
| 180 | ps |
| Kutya kukuru | Tj |
|
| 0.43 | UI |
| Dhizaini yeZiso reMaziso | Inoenderana neIEEE 802.3z uye ANSI Fiber Channel | ||||
| Mugamuchiri Chikamu | |||||
| Urefu hweMafungu epakati | λo | 1260 |
| 1620 | nm |
| Kunzwisisa kweMugamuchiri | Rsen |
|
| -24 | dBm |
| Kutakura Zvakawandisa kweMugamuchiri | Rov | -3 |
|
| dBm |
| Kurasikirwa Kwekudzoka |
| 12 |
|
| dB |
| Kusimbisa kweLOS | LOSA | -36 |
|
| dBm |
| Dhizeti reLos Angeles | LOSD |
|
| -25 | dBm |
| LOS Hysteresis |
| 0.5 |
| 5 | |
Hunhu hweMagetsi
(Kupisa Kunoshanda Kwemhepo 0℃ kusvika +70℃, Vcc =3.3 V)
| Paramita | Chiratidzo | Zvishoma. | Taipa. | Max. | chikwata | |
| Chikamu Chekutumira | ||||||
| Kusiyana Kwekuisa Kusada | Zin | 90 | 100 | 110 | Ohm | |
| Kusiyanisa Kwekupinda Kwedata | Vin | 500 |
| 2400 | mV | |
| Dzima TX | Dzima |
| 2.0 |
| Vcc | V |
| Batsira |
| 0 |
| 0.8 | V | |
| Chikanganiso cheTX | Simbisa |
| 2.0 |
| Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
| Chikamu cheMugamuchiri | ||||||
| Kubuda kwakasiyana kwemhedzisiro | Zout |
| 100 |
| Ohm | |
| Kusiyanisa Kwekupinda Kwedata | Vhouta | 370 |
| 2000 | mV | |
| Rx_LOS | Simbisa |
| 2.0 |
| Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
Ruzivo rweEEPROM (A0)
| Adhireti | Saizi yeMunda (Mabhaiti) | Zita reMunda | HEX | Tsananguro |
| 0 | 1 | Chinozivisa | 03 | SFP |
| 1 | 1 | Chiziviso chekuwedzera | 04 | MOD4 |
| 2 | 1 | Chinobatanidza | 07 | LC |
| 3-10 | 8 | Transceiver | 00 00 00 02 12 00 0D 01 | Kodhi yekutumira |
| 11 | 1 | Kunyora makodhi | 01 | 8B10B |
| 12 | 1 | BR, zita rekuti | 0D | 1250M bps |
| 13 | 1 | Yakachengetedzwa | 00 |
|
| 14 | 1 | Kureba (9um)-km | 3C | 60km |
| 15 | 1 | Kureba (9um) | 64/C8/FF |
|
| 16 | 1 | Kureba (50um) | 00 |
|
| 17 | 1 | Kureba (62.5um) | 00 |
|
| 18 | 1 | Kureba (mhangura) | 00 |
|
| 19 | 1 | Yakachengetedzwa | 00 |
|
| 20-35 | 16 | Zita remutengesi | 57 49 4E 54 4F 50 20 20 20 20 20 20 20 20 20 20 20 | WINTOP |
| 36 | 1 | Yakachengetedzwa | 00 |
|
| 37-39 | 3 | Mutengesi OUI | 00 00 00 |
|
| 40-55 | 16 | Mutengesi PN | xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx | ASC II |
| 56-59 | 4 | Mutengesi wezvekutengesa | 31 2E 30 20 | V1.0 |
| 60-61 | 2 | Kureba kwewave | 06 0E | 1550nm |
| 62 | 1 | Yakachengetedzwa | 00 |
|
| 63 | 1 | CC BASE | XX | Tarisa huwandu hwebhaiti 0 ~ 62 |
| 64-65 | 2 | Sarudzo | 00 1A | LOS, TX_DISABLE, TX_FAULT |
| 66 | 1 | BR, yakakwira | 32 | 50% |
| 67 | 1 | BR, miniti | 32 | 50% |
| 68-83 | 16 | Mutengesi SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | Hazvina kutaurwa |
| 84-91 | 8 | Kodhi yezuva remutengesi | XX XX XX 20 | Gore, Mwedzi, Zuva |
| 92-94 | 3 | Yakachengetedzwa | 00 |
|
| 95 | 1 | CC_EXT | XX | Tarisa huwandu hwebhaiti 64~94 |
| 96-255 | 160 | Mutengesi chaiye |
|
Kuongorora chirwere
| Paramita | Range | Kururama | Chikamu | Kuenzanisa |
| Tembiricha | 0～70 | ±3 | ℃ | Zvemukati |
| Voltage | 3.15～3.45 | 0.1 | V | Zvemukati |
| Rusaruro Rwezvino | 10～80 | ±2 | mA | Zvemukati |
| Simba reTx | -6～1 | ±2 | dBm | Zvemukati |
| Simba reRx | -26~-3 | ±3 | dBm | Zvemukati |
Tsananguro yePin
| Mapini | Zita | Tsananguro | CHERECHEDZA |
| 1 | VeeT | Pasi peChinotumira |
|
| 2 | Chikanganiso cheTx | Chiratidzo Chekukanganisa Kwemuchina | 1 |
| 3 | Kudzima Tx | Kudzima Kutumira | 2 |
| 4 | MOD DEF2 | Tsananguro yeModule 2 | 3 |
| 5 | MOD DEF1 | Tsananguro yeModule 1 | 3 |
| 6 | MOD DEF0 | Tsanangudzo yeModule 0 | 3 |
| 7 | Sarudza Mutengo | Hazvina Kubatanidzwa |
|
| 8 | LOS | Kurasikirwa neChiratidzo | 4 |
| 9 | VeeR | Pasi pemugamuchiri |
|
| 10 | VeeR | Pasi pemugamuchiri |
|
| 11 | VeeR | Pasi pemugamuchiri |
|
| 12 | RD- | Inv. Data Rekubuda Rakagamuchirwa | S |
| 13 | RD+ | Kuburitswa kweData Rakagamuchirwa | S |
| 14 | VeeR | Pasi pemugamuchiri |
|
| 15 | VccR | Simba reMugamuchiri |
|
| 16 | VccT | Simba reKutumira |
|
| 17 | VeeT | Pasi peChinotumira |
|
| 18 | TD+ | Tumira Data Inopinda | 6 |
| 19 | TD- | Kutumira Data muInv. | 6 |
| 20 | VeeT | Pasi peChinotumira |
Zvinyorwa:
1. TX Fault ibutiro rinobuda pachena, rinofanira kudhonzwa ne resistor ye4.7k~10kΩ pabhodhi remubati kusvika pavoltage iri pakati pe2.0V neVcc+0.3V. Logic 0 inoratidza mashandiro akajairwa; logic 1 inoratidza laser fault yerudzi rwakati. Kana yadzikira, butiro rinobuda richadhonzwa kusvika pasi pe0.8V.
2. TX Disable chinhu chinoshandiswa kudzima transmitter optical output. Chinodhonzwa mu module ne 4.7k~10kΩ resistor. Mamiriro acho ndeaya:
Yakaderera (0~0.8V): Chinotumira chakabatidzwa
(>0.8V, <2.0V): Hazvina kutsanangurwa
Yakakwirira (2.0~3.3V): Transmitter Yakaremara
Yakavhurika: Transmitter Yakaremara
3. MOD-DEF 0,1,2 ndiwo mapini etsanangudzo yemodule. Anofanira kudhonzwa ne4.7k~10kΩresistor pabhodhi remubati. Voltage yekudhonza-kumusoro inofanira kuva VccT kana VccR.
MOD-DEF 0 inomiswa nemodule kuratidza kuti module iripo.
MOD-DEF 1 ndiyo mutsetse wewachi wewaya mbiri dzekubatanidza serial ye serial ID.
MOD-DEF 2 ndiyo data line ye two wire serial interface ye serial ID.
4. LOS ibutiro rinobuda muunganidzwa rakavhurika, rinofanira kudhonzwa ne resistor ye4.7k~10kΩ pabhodhi remubati kusvika pavoltage iri pakati pe2.0V neVcc+0.3V. Logic 0 inoratidza kushanda kwakajairika; logic 1 inoratidza kurasikirwa kwechiratidzo. Kana signal yadzikira, butiro rinobuda richadhonzwa kusvika pasi pe0.8V.
5. Aya ndiwo ma "differential receiver output". Aya ndiwo ma "differential lines" akabatana neAC ne100Ω ayo anofanira kugumiswa ne100Ω (differential) pamushandisi weSERDES.
6. Aya ndiwo ma "differential transmitter inputs". Akabatanidzwa neAC, mitsetse yakasiyana ine 100Ω differential termination mukati memodule.
Dunhu Rinokurudzirwa reKushandisa
Zviyero zveOutline (mm)
-
FTTH Kumiswa Kwekumanikidzwa Kudonhedza Wire Clamp
Chinovhara tambo yeFTTH chinovhara tambo yefiber optic chinovhara tambo ye ... -
FTTH Pre-Connectorized Drop Patchcord
Tambo yeDrop yakasungirirwa kare iri pamusoro pevhu ine fiber optic drop wire ine connector yakagadzirwa kumativi ese, yakarongedzwa nehurefu hwakati, uye inoshandiswa kuparadzira optical signal kubva kuOptical Distribution Point (ODP) kuenda kuOptical Termination Premise (OTP) muHouse yemutengi. Zvichienderana ne transmission medium, inopatsanura kuita Single Mode neMulti Mode Fiber Optic Pigtail; Zvichienderana ne connector structure type, inopatsanura FC, SC, ST, MU, MTRJ, D4, E2000, LC nezvimwewo; Zvichienderana ne ceramic end-face yakashongedzwa, inopatsanura kuita PC, UPC neAPC. Oyi inogona kupa marudzi ese e optic fiber patchcord products; Transmission mode, optical cable type uye connector type zvinogona kuenzaniswa zvisina kurongwa. Ine mabhenefiti e stable transmission, high deliciousness uye customization; inoshandiswa zvakanyanya mu optical network scenarios dzakadai seFTTX neLAN nezvimwewo. -
Fiber Optic Cable inozvimiririra Figure 8
Mashinda e250um akaiswa muchubhu isina kusimba yakagadzirwa nepurasitiki ine modulus yakakwirira. Machubhu anozadzwa nechinhu chinozadza chisingapindi mvura. Waya yesimbi iri pakati pepakati senhengo yesimbi ine simba. Machubhu (nemashinda) anosungirirwa akatenderedza nhengo yesimba muchikamu chetambo chakamanikana uye chakatenderera. Mushure mekunge Aluminium (kana tepi yesimbi) Polyethylene Laminate (APL) yaiswa yakatenderedza chikamu chetambo, chikamu ichi chetambo, pamwe chete newaya dzakasungirirwa sechikamu chinotsigira, chinozadzwa ne polyethylene (PE) sheath kuti igadzire chimiro chemufananidzo 8. Matambo eMufananidzo 8, GYTC8A neGYTC8S, anowanikwawo kana ukakumbira. Rudzi urwu rwetambo rwakagadzirirwa zvakananga kuiswa mumhepo inozvimiririra. -
SFP-ETRx-4
ER4 imodule yetransceiver yakagadzirirwa maapplication ekutaurirana kwe40km. Dhizaini yacho inoenderana ne40GBASE-ER4 yeIEEE P802.3ba standard. Module iyi inoshandura nzira ina dzekupinda (ch) dzedata remagetsi re10Gb/s kuita 4 CWDM optical signals, uye inodziwedzera kuita chiteshi chimwe chete chekutumira kwe40Gb/s optical. Zvakasiyana, kudivi rekugamuchira, module iyi inobvisa multiplexes ye40Gb/s muzviratidzo zve4 CWDM channels, uye inodzishandura kuita 4 channel output electrical data. -
Chinongedzo Chinokurumidza cheOYI G
Chinobatanidza chedu cheFiber optic fast OYI G chakagadzirirwa FTTH (Fiber To The Home). Ichizvarwa chitsva chechinobatanidza chefiber chinoshandiswa mukuunganidza. Chinogona kupa kuyerera kwakavhurika uye rudzi rwe precast, izvo zvinosangana ne standard optical fiber connector. Yakagadzirirwa mhando yepamusoro uye kushanda zvakanaka kwekuisa. Chinobatanidza che mechanical chinoita kuti fiber terminaitons ikurumidze, ive nyore uye yakavimbika. Izvi zvinobatanidza fiber optic zvinopa terminations pasina matambudziko uye hazvidi epoxy, hapana kupolisha, hapana kupwanya, hapana kupisa uye zvinogona kuwana ma parameters akanaka ekutumira se standard polishing uye spicing technology. Chinobatanidza chedu chinogona kuderedza zvakanyanya nguva yekuunganidza nekugadzirisa. Zvinobatanidza zvakapolisha zvinonyanyo shandiswa paFTTH cable mumapurojekiti eFTTH, zvakananga panzvimbo yemushandisi wekupedzisira. -
Chinodonhedza Cable Chinonamira Chinokanda S-Type
Chinovhara tambo yekudzikisa waya, chinonziwo FTTH chinovhara tambo yekudzikisa, chakagadzirwa kuti chitsigire tambo ye fiber optic yakatsetseka kana yakatenderera panzira dziri pakati kana kuti tambo dzekupedzisira panguva yekuisa FTTH pamusoro pekunze. Chakagadzirwa nepurasitiki isingapindi UV uye waya yesimbi isina ngura yakagadziriswa ne tekinoroji yekuumba majekiseni.
Kana uchitsvaga nzira yakavimbika uye inokurumidza yekubatanidza tambo yefiber optic, usatsvaga imwe nzvimbo kunze kweOYI. Taura nesu izvozvi kuti uone kuti tingakubatsira sei kuti urambe wakabatana uye kuti bhizinesi rako rienderere mberi.
