0755-23179541 
sales@oyii.net
OYI-NOO2 Floor-Mounted Cabinet
19”18U-47U Racks Cabinets
OYI-NOO2 Floor-Mounted Cabinet
Product Features
1. Frame: Welded frame, stable structure with precise craftsmanship.
2. Double Section, compatible with 19" standard equipment.
3. Front Door: High strength toughened glass front door with over 180 turning degree.
4. Side Panel: Removable side panel, easy to install and maintain (lock optional).
5. Top and Bottom removable cable slots.
6. L-Shaped Mounting Profile, easy to adjustable on the mounting rail.
7. Fan cutout on the top cover, easy to install fan.
8. 2 Sets of adjustable mounting rails (Zinc Plated).
9. Material: SPCC Cold Rolled Steel.
10.Color: Black (RAL 9004), White (RAL 7035), Grey (RAL 7032).
Technical Specifications
1. Operating temperature: -10℃-+45℃
2. Storage temperature: -40℃ +70℃
3.Relative humidity:≤85%(+30℃)s
4. Atmospheric pressure: 70~106 KPa
5. Isolation resistance: ≥1000MΩ/500V(DC)
6.Durability:＞1000 times
7.Anti-voltage strength: ≥3000V(DC)/1min
Applications
1.Communications.
2.Networks.
3.Industrial control.
4.Building automation.
Other Optional Accessories
1.Fan assembly kit.
2.PDU.
3.Racks Screws, Cage nuts.
4.Plastic/Metal Cable management.
5.Shelves.
Dimension
Standard Attached Accessories
Products details
Packing Information
We will be packaged according to customer requirements, if there is no clear requirement, it will follow the OYI default packaging standard.
-
OPERATING MANUAL
Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.
It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design. -
Indoor Bow-type drop cable
The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH)/PVC sheath.
-
OYI B Type Fast Connector
Our fiber optic fast connector, OYI B type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, with a unique design for the crimping position structure.
-
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.
-
OYI I Type Fast Connector
SC field assembled melting free physical connector is a kind of quick connector for physical connection. It uses special optical silicone grease filling to replace the easy-to-lose matching paste. It is used for quick physical connection (not matching paste connection) of small equipment. It is matched with a group of optical fiber standard tools. It is simple and accurate to complete the standard end of optical fiber and reaching the physical stable connection of optical fiber. The assembly steps are simple and low skills required. the connection success rate of our connector is nearly 100%, and the service life is more than 20 years.
-
OYI-FATC 8A Terminal Box
The 8-core OYI-FATC 8A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FATC 8A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions,and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to accommodate the box’s expansion needs.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
