0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FTB-16A Terminal Box
Optic Fiber Terminal/Distribution Box Box 16 Cores Type
OYI-FTB-16A Terminal Box
Product Features
1.Total enclosed structure.
2.Material: ABS, wet-proof , water-proof, dust proof, anti-aging, protection level up to IP65.
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage distribution ... etc all in one.
4.Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor, installation easy maintenance.
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6.Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor uses.
Application
1.Widely used in FTTH access network.
2.Telecommunication Networks.
3.CATV Networks Data communications Networks.
4.Local Area Networks.
Configuration
|
Material |
Size |
Max Capacity |
Nos of PLC |
Nos of Adaptor |
Weight |
Ports |
|
Strengthen Polymer Plastic |
A*B*C(mm) 285*215*115 |
Splice 16 Fibers (1trays,16 fiber/tray) |
2 pcs of 1x8 1 pcs of 1×16 |
16 pcs of SC(max) |
1.05kg |
2 in 16 out |
Standard Accessories
1.Screw: 4mm*40mm 4pcs
2.Expansion bolt: M6 4pcs
3.Cable tie:3mm*10mm 6pcs
4.Heat-shrink sleeve:1.0mm*3mm*60mm 16pcs Key:1pcs
5.hoop ring: 2pcs
Packaging Information
|
PCS/CARTON |
Gross Weight（Kg） |
Net Weight（Kg） |
Carton Size（cm） |
Cbm（ m³) |
|
10 10.5 |
9.5 |
47.5*29*65 |
0.091 |
|
Inner Box
Outer Carton
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101G fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-TX or 1000Base-TX Ethernet signals and 1000Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.MC0101G fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 550m or a maximum single mode fiber optic cable distance of 120km providing a simple solution for connecting 10/100Base-TX Ethernet networks to remote locations using SC/ST/FC/LC terminated single mode/multimode fiber, while delivering solid network performance and scalability.Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features auto. switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode speed, full and half duplex. -
OYI-FOSC-M5
The OYI-FOSC-M5 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
Stainless Steel Banding Strapping Tools
The giant banding tool is useful and of high quality, with its special design for strapping giant steel bands. The cutting knife is made with a special steel alloy and undergoes heat treatment, which makes it last longer. It is used in marine and petrol systems, such as hose assemblies, cable bundling, and general fastening. It can be used with the series of stainless steel bands and buckles. -
OYI-FOSC-H20
The OYI-FOSC-H20 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
