0755-23179541 
sales@oyii.net
OYI-FOSC-M20
Fiber Optic Splice Closure Mechanical Dome Type
OYI-FOSC-M20
The closure has 5 entrance ports on the end (4 round ports and 1 oval port). The shell of the product is made from ABS+PP material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material.
The closure's main construction includes the box, splicing, and it can be configured with adapters and optical splitters.
Product Features
High-quality ABS+PP materials are optional, which can ensure harsh conditions such as vibration and impact.
Structural parts are made of high-quality stainless steel, providing high strength and corrosion resistance, making them suitable for various environments.
The structure is strong and reasonable, with a mechanical sealing structure that can be opened and reused after sealing.
It is well water and dust-proof, with a unique grounding device to ensure sealing performance and convenient installation.
The splice closure has a wide application range, with good sealing performance and easy installation. It is produced with high-strength engineering plastic housing that is anti-aging, corrosion-resistant, high-temperature resistant, and has high mechanical strength.
The box has multiple reuse and expansion functions, allowing it to accommodate various core cables.
The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber, ensuring a curvature radius of 40mm for optical winding.
Each optical cable and fiber can be operated individually.
Using mechanical sealing , reliable sealing, and convenient operation.
The protection grade reaches IP68.
Designed for FTTH with adapter if needed.
Technical Specifications
| Item No. | OYI-FOSC-M20DM02 | OYI-FOSC-M20DM01 | |
| Size (mm) | Φ130 * 440 | Φ160X540 | |
| Weight (kg) | 2.5 | 4.5 | |
| Cable Diameter (mm) | Φ7~Φ25 | Φ7~Φ25 | |
| Cable Ports | 1 in, 4 out | 1 in, 4 out | |
| Max Capacity Of Fiber | 12~96 | 144~288 | |
| Max Capacity Of Splice Tray | 4 | 8 | |
| Max Capacity Of Splice | 24 | 24/36 (144Core Use 24F Tray) | |
| Max Capacity Of Adapter | 32Pcs SC Simplex | ||
| Cable Entry Sealing | Mechanical Sealing By Silicon Rubber | ||
| Life Span | More Than 25 Years | ||
| Packing Size | 46*46*62cm (6Pcs) | 59x49x66cm (6Pcs) | |
| G.Weight | 15kg | 23kg | |
Applications
Be suitable for aerial, duct, and direct buried applications.
CATV environments, telecommunications, customer premises environments, carrier networks, and fiber optic networks.
Pole Mounting
Aerial mounting
Product Pictures
Standard Accessories For M20DM02
Pole Mounting Accessories For M20DM01
Aerial Accessories For M20DM01 and 02
Packaging Information
OYI-FOSC-M20DR02 96F as a reference.
Quantity: 6pcs/Outer box.
Carton Size: 46*46*62cm.
N.Weight: 14kg/Outer Carton.
G.Weight: 15kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
OYI-FOSC H10
The OYI-FOSC-03H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Micro Fiber Indoor Cable GJYPFV(GJYPFH)
The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH/PVC) sheath.
-
Male to Female Type FC Attenuator
OYI FC male-female attenuator plug type fixed attenuator family offers high performance of various fixed attenuation for industrial standard connections. It has a wide attenuation range, extremely low return loss, is polarization insensitive, and has excellent repeatability. With our highly integrated design and manufacturing capability, the attenuation of male-female type SC attenuator can also be customized to help our customers find better opportunities. Our attenuator complies with industry green initiatives, such as ROHS.
-
OPERATING MANUAL
Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.
It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design. -
Non-metallic Strength Member Light-armored Dire...
The fibres are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. A FRP wire locates in the center of core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
