0755-23179541 
sales@oyii.net
SC Type
Optic Fiber Adapter
SC Type
Product Features
Simplex and duplex versions are available.
Low insertion loss and return loss.
Excellent changeability and directivity.
Ferrule end surface is pre-domed.
Precision anti-rotation key and corrosion-resistant body.
Ceramic sleeves.
Professional manufacturer, 100% tested.
Accurate mounting dimensions.
ITU standard.
Fully compliant with ISO 9001:2008 quality management system.
Technical Specifications
| Parameters |
SM |
MM |
||
|
PC |
UPC |
APC |
UPC |
|
| Operation Wavelength |
1310&1550nm |
850nm&1300nm |
||
| Insertion Loss (dB) Max |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.3 |
| Return Loss (dB) Min |
≥45 |
≥50 |
≥65 |
≥45 |
| Repeatability Loss (dB) |
≤0.2 |
|||
| Exchangeability Loss (dB) |
≤0.2 |
|||
| Repeat Plug-Pull Times |
＞1000 |
|||
| Operation Temperature (℃) |
-20~85 |
|||
| Storage Temperature (℃) |
-40~85 |
|||
Applications
Telecommunication system.
Optical communication networks.
CATV, FTTH, LAN.
Fiber optic sensors.
Optical transmission system.
Test equipment.
Industrial, Mechanical, and Military.
Advanced production and testing equipment.
Fiber distribution frame, mounts in fiber optic wall mount and mount cabinets.
Product Pictures
Packaging Information
SC/APC SX Adapter as a reference.
50 pcs in 1 plastic box.
5000 specific adapter in carton box.
Outside carton box size: 47*39*41 cm, weight: 15.5kg.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
-
drop cable
Drop Fiber Optic Cable 3.8 mm constructed one single strand of fiber with 2.4 mm loose tube, protected aramid yarn layer is for strength and physical support. Outer jacket made of HDPE materials that use in applications where smoke emission and toxic fumes could pose a risk to human health and essential equipment in the event of a fire.
-
Ear-Lokt Stainless Steel Buckle
Stainless steel buckles are manufactured from high quality type 200, type 202, type 304, or type 316 stainless steel to match the stainless steel strip. Buckles are generally used for heavy duty banding or strapping. OYI can emboss customers’ brand or logo onto the buckles.
The core feature of the stainless steel buckle is its strength. This feature is due to the single stainless steel pressing design, which allows for construction without joins or seams. The buckles are available in matching 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″ widths and, with the exception of the 1/2″ buckles, accommodate the double-wrap application to solve heavier duty clamping requirements.
-
Multi Purpose Beak-out Cable GJBFJV(GJBFJH)
The multi-purpose optical level for wiring uses subunits (900μm tight buffer, aramid yarn as a strength member), where the photon unit is layered on the non-metallic center reinforcement core to form the cable core. The outermost layer is extruded into a low smoke halogen-free material (LSZH, low smoke, halogen-free, flame retardant) sheath.(PVC)
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
