0755-23179541 
sales@oyii.net.png)
8618926041961
Male to Female Type LC Attenuator
Fiber Optic Attenuator
Male to Female Type LC Attenuator
Product Features
Wide attenuation range.
Low return loss.
Low PDL.
Polarization insensitive.
Various connector types.
Highly reliable.
Specifications
| Parameters |
Min |
Typical |
Max |
Unit |
|
| Operating Wavelength Range |
1310±40 |
mm |
|||
|
1550±40 |
mm |
||||
| Return Loss | UPC Type |
50 |
dB |
||
| APC Type |
60 |
dB |
|||
| Operating Temperature |
-40 |
85 |
℃ |
||
| Attenuation Tolerance |
0~10dB±1.0dB |
||||
|
11~25dB±1.5dB |
|||||
| Storage Temperature |
-40 |
85 |
≥50 |
||
Note: Customized configurations is available upon request.
Applications
Optical fiber communication networks.
Optical CATV.
Fiber network deployments.
Fast/Gigabit Ethernet.
Other data applications requiring high transfer rates.
Packaging Information
1 pc in 1 plastic bag.
1000 pcs in 1 carton box.
Outside carton box Size: 46*46*28.5 cm, Weight: 18.5kg.
OEM service is available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-FOSC-H8
The OYI-FOSC-H8 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users.XPON has G / E PON mutual conversion function, which is realized by pure software.ONU support one pots for VOIP application. -
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation. -
OYI-FAT24A Terminal Box
The 24-core OYI-FAT24A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. -
Anchoring Clamp PA600
The anchoring cable clamp PA600 is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 3-9mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests. -
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
