0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FOSC-H09
Fiber Optic Splice Closure Horizontal Fiber Optical Type
OYI-FOSC-H09
Product Features
1.The closure casing is made of high-quality engineering PC plastics, providing excellent resistance against erosion from acid, alkali salt, and aging. It also has a smooth appearance and a reliable mechanical structure.
2.The mechanical structure is reliable and can withstand harsh environments, including intensive climate changes and demanding working conditions. The protection grade reaches IP68.
3.The splice trays inside the closure are turn-able like booklets, providing adequate curvature radius and space for winding optical fiber to ensure a curvature radius of 40mm for optical winding. Each optical cable and fiber can be operated individually.
4.The closure is compact, has a large capacity, and is easy to maintain. The elastic rubber seal rings inside the closure provide good sealing and sweat-proof performance.
Technical Specifications
|
Item No. |
OYI-FOSC-09H |
|
Size (mm) |
560*240*130 |
|
Weight (kg) |
5.35kg |
|
Cable Diameter (mm) |
φ 28mm |
|
Cable Ports |
3 in 3 out |
|
Max Capacity Of Fiber |
288 |
|
Max Capacity Of Splice Tray |
24-48 |
|
Cable Entry Sealing |
Inline,Horizontal-Shrinkable Sealing |
|
Sealing Structure |
Silicon Gum Material |
Applications
1.Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.
2.Using in communication cable line overhead mounted, underground, direct-buried, and so on.
Packaging Information
1. Quantity: 6pcs/Outer box.
2.Carton Size: 60*59*48cm.
3.N.Weight: 32kg/Outer Carton.
4.G.Weight: 33kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
OYI G type Fast Connector
Our Fiber optic fast connector OYI G type designed for FTTH(Fiber To The Home). It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high efficiency for installation. Mechanical connectors make fiber terminaitons quick, easy and reliable. These fiber optic connectors offer terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar excellent transmission parameters as standard polishing and spicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site. -
Optical Fiber Cable Storage Bracket
The Fiber Cable storage bracket is useful. Its main material is carbon steel. The surface is treated with hot-dipped galvanization, which allows it to be used outdoors for more than 5 years without rusting or experiencing any surface changes. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc. -
Loose Tube Armored Flame-retardant Direct Burie...
The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS) -
drop cable
Drop Fiber Optic Cable 3.8 mm constructed one single strand of fiber with 2.4 mm loose tube, protected aramid yarn layer is for strength and physical support. Outer jacket made of HDPE materials that use in applications where smoke emission and toxic fumes could pose a risk to human health and essential equipment in the event of a fire. -
Anchoring Clamp PA300
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 4-7mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
