OYI-FOSC H13

Fiber Optic Splice Closure Horizontal Fiber Optical Type

OYI-FOSC H13

The OYI-FOSC-05H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.

The closure has 3 entrance ports and 3 output ports. The shell of the product is made from ABS/PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.

Product Detail

FAQ

Product Tags

Product Features

The closure casing is made of high-quality engineering ABS and PP plastics, providing excellent resistance against erosion from acid, alkali salt, and aging. It also has a smooth appearance and a reliable mechanical structure.

The mechanical structure is reliable and can withstand harsh environments, including intensive climate changes and demanding working conditions. The protection grade reaches IP68.

The splice trays inside the closure are turn-able like booklets, providing adequate curvature radius and space for winding optical fiber to ensure a curvature radius of 40mm for optical winding. Each optical cable and fiber can be operated individually.

The closure is compact, has a large capacity, and is easy to maintain. The elastic rubber seal rings inside the closure provide good sealing and sweat-proof performance.

Specifications

Item No.	OYI-FOSC-05H
Size (mm)	430190140
Weight (kg)	2.35kg
Cable Diameter (mm)	φ 16mm, φ 20mm,φ 23mm
Cable Ports	3 in 3 out
Max Capacity Of Fiber	96
Max Capacity Of Splice Tray	24
Cable Entry Sealing	Inline,Horizontal-Shrinkable Sealing
Sealing Structure	Silicon Gum Material

Applications

Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.

Using in communication cable line overhead mounted, underground, direct-buried, and so on.

Packaging Information

Quantity: 10pcs/Outer box.

Carton Size: 45*42*67.5cm.

N.Weight: 27kg/Outer Carton.

G.Weight: 28kg/Outer Carton.

OEM service available for mass quantity, can print logo on cartons.

Inner Box

Outer Carton

Structured Cabling System

Outside Plant

Wholesale Fiber Wire

Multi Mode Factories

Optic Cord Exporters

Access Point Mean

Fiber Splice

Closure Optical Cable

Data Cabling

Products Recommended

Self-supporting Figure 8 Fiber Optic Cable

The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.

VIEW MORE
SFP+ 80km Transceiver

PPB-5496-80B is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 11.1Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 80km in 9/125um single mode fiber.

VIEW MORE
Loose Tube Non-metallic Heavy Type Rodent Prote...

Insert the optical fiber into the PBT loose tube, fill the loose tube with waterproof ointment. The center of the cable core is a non-metallic reinforced core, and the gap is filled with waterproof ointment. The loose tube (and filler) is twisted around the center to strengthen the core, forming a compact and circular cable core. A layer of protective material is extruded outside the cable core, and glass yarn is placed outside the protective tube as a rodent proof material. Then, a layer of polyethylene (PE) protective material is extruded.(WITH DOUBLE SHEATHS)

VIEW MORE
ADSS Suspension Clamp Type A

The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability and can extend the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion.

VIEW MORE
Non-metallic Strength Member Light-armored Dire...

The fibres are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. A FRP wire locates in the center of core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)

VIEW MORE
OYI-NOO2 Floor-Mounted Cabinet

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE