0755-23179541 
sales@oyii.net.png)
8618926041961
Fanout Multi-core (4~144F) 0.9mm Connectors Patch Cord
Optic Fiber Patch Cord
Fanout Multi-core (4~144F) 0.9mm Connectors Patch Cord
Product Features
Low insertion loss.
High return loss.
Excellent Repeatability, exchangeability, wearability and stability.
Constructed from high quality connectors and standard fibers.
Applicable connector: FC, SC, ST, LC, MTRJ and E2000.
Cable material: PVC, LSZH, OFNR, OFNP.
Single mode or multiple mode available, OS1, OM1, OM2, OM3, OM4 or OM5.
Environmentally stable.
Technical Specifications
| Parameter | FC/SC/LC/ST | MU/MTRJ | E2000 | ||||
| SM | MM | SM | MM | SM | |||
| UPC | APC | UPC | UPC | UPC | UPC | APC | |
| Operating Wavelength (nm) | 1310/1550 | 850/1300 | 1310/1550 | 850/1300 | 1310/1550 | ||
| Insertion Loss (dB) | ≤0.2 | ≤0.3 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 | |
| Return Loss (dB) | ≥50 | ≥60 | ≥35 | ≥50 | ≥35 | ≥50 | ≥60 |
| Repeatability Loss (dB) | ≤0.1 | ||||||
| Interchangeability Loss (dB) | ≤0.2 | ||||||
| Repeat Plug-pull Times | ≥1000 | ||||||
| Tensile Strength (N) | ≥100 | ||||||
| Durability Loss (dB) | ≤0.2 | ||||||
| Operating Temperature (℃) | -45~+75 | ||||||
| Storage Temperature (℃) | -45~+85 | ||||||
Applications
Telecommunication system.
Optical communication networks.
CATV, FTTH, LAN.
NOTE: We can provide specify patch cord which required by customer.
Fiber optic sensors.
Optical transmission system.
Test equipment.
Cable Types
GJFJV(H)
GJPFJV(H)
| Model Name | GJFJV(H)/GJPFJV(H)/GJPFJV(H) |
| Fiber Types | G652D/G657A1/G657A2/OM1/OM2/OM3/OM4/OM5 |
| Strength Member | FRP |
| Jacket | LSZH/PVC/OFNR/OFNP |
| Attenuation (dB/km) | SM:1330nm ≤0.356, 1550nm ≤0.22 |
| MM:850nm ≤3.5, 1300nm ≤1.5 | |
| Cable Standard | YD/T 1258.4-2005, IEC 60794 |
Cable Technical Parameters
|
Cable Code |
Cable Diameter |
Cable Weight(Kg/km) |
Tensile Strength(N) |
Crush Resistance(N/100mm) |
Bending Radius(mm) |
|||
|
Long Term |
Short Term |
Long Term |
Short Term |
Dynamic |
Static |
|||
|
GJFJV-02 |
4.1 |
12.4 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-04 |
4.8 |
16.2 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-06 |
5.2 |
20 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-08 |
5.6 |
26 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-10 |
5.8 |
28 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-12 |
6.4 |
31.5 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJFJV-24 |
8.5 |
42.1 |
200 |
660 |
300 |
1000 |
20D |
10D |
|
GJPFJV-24 |
10.4 |
96 |
400 |
1320 |
300 |
1000 |
20D |
10D |
|
GJPFJV-30 |
12.4 |
149 |
400 |
1320 |
300 |
1000 |
20D |
10D |
|
GJPFJV-36 |
13.5 |
185 |
600 |
1800 |
300 |
1000 |
20D |
10D |
|
GJPFJV-48 |
15.7 |
265 |
600 |
1800 |
300 |
1000 |
20D |
10D |
|
GJPFJV-60 |
18 |
350 |
1500 |
4500 |
300 |
1000 |
20D |
10D |
|
GJPFJV-72 |
20.5 |
440 |
1500 |
4500 |
300 |
1000 |
20D |
10D |
|
GJPFJV-96 |
20.5 |
448 |
1500 |
4500 |
300 |
1000 |
20D |
10D |
|
GJPFJV-108 |
20.5 |
448 |
1500 |
4500 |
300 |
1000 |
20D |
10D |
|
GJPFJV-144 |
25.7 |
538 |
1600 |
4800 |
300 |
1000 |
20D |
10D |
Packaging Information
SC/UPC-SC/UPC SM Fanout 24F 2M as a reference.
1 pc in 1 plastic bag.
30 specific patch cord in carton box.
Outer carton box size: 46*46*28.5 cm, weight: 18.5kg.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-NOO1 Floor-Mounted Cabinet
Frame: Welded frame, stable structure with precise craftsmanship. -
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
Anchoring Clamp PA3000
The anchoring cable clamp PA3000 is of high quality and durable. This product consists of two parts: a stainless-steel wire and its main material, a reinforced nylon body that is lightweight and convenient to carry outdoors. The clamp’s body material is UV plastic, which is friendly and safe and can be used in tropical environments and is hung and pulled by electroplating steel wire or 201 304 stainless-steel wire. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-17mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees Celsius. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests. -
Double FRP reinforced non-metallic central bund...
The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable. -
Loose Tube Armored Flame-retardant Direct Burie...
The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
