0755-23179541 
sales@oyii.net.png)
8618926041961
J Clamp J-Hook Big Type Suspension Clamp
Pole Hardware Suspension Clamp
J Clamp J-Hook Big Type Suspension Clamp
Product Features
Easy operation, free tools.
High mechanical strength, up to 6KN.
Stainless steel J-shape hook and UV proof insert.
Can be installed on poles with stainless steel strap or pole bolt.
Excellent environmental stability.
Specifications
| Model | Cable Diameter (mm) | Break Load (kN) |
| OYI-J Hook (10-15) | 10-15 | 6 |
| OYI-J Hook (15-20) | 15-20 | 6 |
Applications
ADSS cable suspension, hanging, fixing walls, poles with drive hooks, pole brackets and other drop wire fittings or hardware.
Packaging Information
Quantity: 50pcs/Outer box.
Carton Size: 40*30*30cm.
N.Weight: 26.5kg/Outer Carton.
G.Weight: 27.5kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Bundle Tube Type all Dielectric ASU Self-Suppor...
The structure of the optical cable is designed to connect 250 μm optical fibers. The fibers are inserted into a loose tube made of high modulus material, which is then filled with waterproof compound. The loose tube and FRP are twisted together using SZ. Water blocking yarn is added to the cable core to prevent water seepage, and then a polyethylene (PE) sheath is extruded to form the cable. A stripping rope can be used to tear open the optical cable sheath. -
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
Dead end Guy Grip
Dead-end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines. The reliability and economic performance of the product are better than the bolt type and hydraulic type tension clamp that are widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminum clad steel. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
OYI-FOSC-D106H
The OYI-FOSC-D106H dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 7 entrance ports on the end (6 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
GYFXTH-2/4G657A2
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
