0755-23179541 
sales@oyii.net.png)
8618926041961
Anchoring Clamp PA600
Hardware Products Overhead Line Fittings
Anchoring Clamp PA600
Product Description
The anchoring cable clamp PA600 is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 3-9mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
Product Features
1.Good anti-corrosion performance.
2.Abrasion and wear resistant.
3.Maintenance-free.
4.Strong grip to prevent the cable from slipping.
5.Body is cast of nylon body, it’s lightly and convenient to carry outside.
6.SS201/SS304 Stainless steel wire has guaranteed firm tensile force.
7.Wedges are made of weather resistant material.
8.The installation does not require any specific tools and the operating time is drastically reduced.
Specifications
|
Model |
Cable Diameter (mm) |
Break Load (km) |
Material |
Warranty Time |
|
OYI-PA600 |
3-9 |
3 |
PA, Stainless Steel |
10 years |
Installation Instructions
Anchoring clamps for ADSS cables installed on short spans (100 m max.)
Attach the clamp to the pole bracket using its flexible bail.
Push on the wedges by hand to initiate the gripping onto the cable.
Place the clamp body over the cable with the wedges in their back position.
Check the correct positioning of the cable between the wedges.
When the cable is brought to its installation load at the end pole, the wedges move further into the clamp body.
When installing a double dead-end leave some extra length of cable between the two clamps.
Applications
1.Hanging cable.
2.Propose a fitting covering installation situations on poles.
3.Power and overhead line accessories.
4.FTTH fiber optic aerial cable.
Packaging Information
Quantity: 50pcs/Outer box.
1.Carton Size: 40*30*26cm.
2.N. Weight: 10kg/Outer Carton.
3.G. Weight: 10.5kg/Outer Carton.
4.OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Mini Steel Tube Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
GJYFKH
-
OYI-FOSC-D103M
The OYI-FOSC-D103M dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 6 entrance ports on the end (4 round ports and 2 oval port). The shell of the product is made from ABS/PC+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
OYI-FAT F24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
OYI 321GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, onu is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability,easy management,flexible configuration，robustness，good quality service guarantee(Qos). ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users. XPON has G / E PON mutual conversion function, which is realized by pure software. -
OYI-OCC-D Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
