0755-23179541 
sales@oyii.net.png)
8618926041961
ADSS Down Lead Clamp
Hardware Products Overhead Line Fittings
ADSS Down Lead Clamp
Product Features
Proper spacing and holding strength without damaging the cables.
Easy, quick, and reliable installation.
Large range for application.
Specifications
| Model | Pole Diameter Range (mm) | Fiber Cable Diameter Range (mm) | Working Load (kn) | Applicable Temperature Range (℃) |
| Down Lead Clamp | 150-1000 | 9.0-18 | 5-15 | -40~+80 |
Applications
It is installed to down lead or jump-joint cables on terminal tower/pole or splice joint tower/pole.
Down lead for OPGW and ADSS optical cable.
Packaging Information
Quantity: 30pcs/Outer box.
Carton Size: 57*32*26cm.
N.Weight: 20kg/Outer Carton.
G.Weight: 21kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-FAT48A Terminal Box
The 48-core OYI-FAT48A series optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT48A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage area. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 3 cable holes under the box that can accommodate 3 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to meet the expansion needs of the box. -
OYI-ATB01C Desktop Box
OYI-ATB01C one ports terminal box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall. -
Anchoring Clamp OYI-TA03-04 Series
This OYI-TA03 and 04 cable clamp is made of high-strength nylon and 201 stainless steel, suitable for circular cables with a diameter of 4-22mm. Its biggest feature is the unique design of hanging and pulling cables of different sizes through the conversion wedge, which is firm and durable. The optical cable is used in ADSS cables and various types of optical cables, and is easy to install and use with high cost-effectiveness. The difference between 03 and 04 is that 03 steel wire hooks from the outside to the inside, while 04 type wide steel wire hooks from the inside to the outside -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
OYI-OCC-A Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user. -
OYI-FOSC-H03
The OYI-FOSC-H03 Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 3 entrance ports and 3 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
