0755-23179541 
sales@oyii.net
OYI-FTB-10A Terminal Box
Optic Fiber Terminal/Distribution Box
OYI-FTB-10A Terminal Box
Product Features
1.User familiar industry interface, using high impact plastic ABS.
2.Wall and pole mountable.
3.No need screws, it is easy to close and open.
4.The high strength plastic, anti ultraviolet radiation and ultraviolet radiation resistant.
Applications
1.Widely used in FTTH access network.
2.Telecommunication Networks.
3.CATV Networks Data communications Networks.
4.Local Area Networks.
Product Parameter
|
Dimension( L×W×H ) |
205.4mm×209mm×86mm |
|
Name |
Fiber termination box |
|
Material |
ABS+PC |
|
IP Grade |
IP65 |
|
Max ratio |
1:10 |
|
Max capacity(F) |
10 |
|
Adaptor |
SC Simplex or LC Duplex |
|
Tensile strength |
>50N |
|
Colour |
Black and White |
|
Environment |
Accessories: |
|
1. Tempreture: -40 ℃—60℃ |
1. 2 hoops (outdoor air frame) Optional |
|
2. Ambient Humidity : 95% above 40 。C |
2.wall mount kit 1 set |
|
3. Air pressure: 62kPa—105kPa |
3.two lock keys used waterproof lock |
Product Drawing
Optional Accessories
Packaging Information
Inner Box
Outer Carton
-
OYI H Type Fast Connector
Our fiber optic fast connector, the OYI H type, is designed for FTTH (Fiber to The Home), FTTX (Fiber to the X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.
Hot-melt quickly assembly connector is directly with a grinding of the ferrule connector directly with the falt cable 2*3.0MM /2*5.0MM/2*1.6MM, round cable 3.0MM,2.0MM,0.9MM, using a fusion splice, the splicing point inside the connector tail, the weld is no need for additional protection. It can improve the optical performance of the connector. -
Loose Tube Non-metallic & Non-armored Fibe...
The structure of the GYFXTY optical cable is such that a 250μm optical fiber is enclosed in a loose tube made of high modulus material. The loose tube is filled with waterproof compound and water-blocking material is added to ensure longitudinal water-blocking of the cable. Two glass fiber reinforced plastics (FRP) are placed on both sides, and finally, the cable is covered with a polyethylene (PE) sheath through extrusion.
-
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.
-
Fanout Multi-core (4~48F) 2.0mm Connectors Patc...
OYI fiber optic fanout patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors on each end. Fiber optic patch cables are used in two major application areas: computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, and E2000 (APC/UPC polish) are all available.
-
OYI-OCC-E Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
-
Armored Optic Cable GYFXTS
Optical fibers are housed in a loose tube that is made of high-modulus plastic and filled with water blocking yarns. A layer of non-metallic strength member is stranding around the tube, and the tube is armored with the plastic coated steel tape. Then a layer of PE outer sheath is extruded.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.