0755-23179541 
sales@oyii.net.png)
8618926041961
Optical Fiber Cable Storage Bracket
Hardware Products Overhead Line Fittings
Optical Fiber Cable Storage Bracket
A fiber cable storage bracket is a device used to securely hold and organize fiber optic cables. It is typically designed to support and protect cable coils or spools, ensuring that the cables are stored in an organized and efficient manner. The bracket can be mounted on walls, racks, or other suitable surfaces, allowing for easy access to the cables when needed. It can also be used on poles to collect optical cable on the towers. Mainly, it can be used with a series of stainless steel bands and stainless buckles, which can be assembled on the poles, or assembled with the option of aluminum brackets. It is commonly used in data centers, telecommunications rooms, and other installations where fiber optic cables are used.
Product Features
Lightweight: The cable storage assembly adapter is made of carbon steel, providing good extension while remaining light in weight.
Easy to install: It does not require special training for construction operation and does not come with any additional charges.
Corrosion prevention: All of our cable storage assembly surfaces are hot-dip galvanized, protecting the vibration damper from rain erosion.
Convenient tower installation: It can prevent loose cable, provide firm installation, and protect the cable from wearing and tearing.
Specifications
| Item No. | Thickness (mm) | Width (mm) | Length (mm) | Material |
| OYI-600 | 4 | 40 | 600 | Galvanized Steel |
| OYI-660 | 5 | 40 | 660 | Galvanized Steel |
| OYI-1000 | 5 | 50 | 1000 | Galvanized Steel |
| All type and size are available as your request. | ||||
Applications
Deposit the remaining cable on the running pole or tower. It is usually used with the joint box.
Overhead line accessories are used in power transmission, power distribution, power stations, etc.
Packaging Information
Quantity: 180pcs.
Carton Size: 120*100*120cm.
N.Weight: 450kg/Outer Carton.
G.Weight: 470kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests. -
OPERATING MANUAL
Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design. -
Stay Rod
This stay rod is used to connect the stay wire to the ground anchor, also known as the stay set. It ensures that the wire is firmly rooted to the ground and everything remains stable. There are two types of stay rods available in the market: the bow stay rod and the tubular stay rod. The difference between these two types of power-line accessories is based on their designs. -
GJYFKH
-
ADSS Down Lead Clamp
The down-lead clamp is designed to guide cables down on splice and terminal poles/towers, fixing the arch section on the middle reinforcing poles/towers. It can be assembled with a hot-dipped galvanized mounting bracket with screw bolts. The strapping band size is 120cm or can be customized to customer needs. Other lengths of the strapping band are also available. The down-lead clamp can be used for fixing OPGW and ADSS on power or tower cables with different diameters. Its installation is reliable, convenient, and fast. It can be divided into two basic types: pole application and tower application. Each basic type can be further divided into rubber and metal types, with the rubber type for ADSS and the metal type for OPGW. -
8 Cores Type OYI-FAT08E Terminal Box
The 8-core OYI-FAT08E optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08E optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
