0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-ODF-SR-Series Type
Optic Fiber Terminal/Distribution Panel
OYI-ODF-SR-Series Type
Product Features
19" standard size, easy to install.
Install with sliding rail, easy to take out.
Lightweight, strong strength, good anti-shock and dustproof properties.
Well-managed cables, allowing for easy distinction.
Roomy space ensures proper fiber bending ratio.
All types of pigtails available for installation.
Use of cold-rolled steel sheet with strong adhesive force, artistic design, and durability.
Cable entrances are sealed with oil-resistant NBR to increase flexibility. Users can choose to pierce the entrance and exit.
Versatile panel with extendable double slide rails for smooth sliding.
Comprehensive accessory kit for cable entry and fiber management.
Patch cord bend radius guides minimize macro bending.
Fully assembled (loaded) or empty panel.
Different adapter interfaces including ST, SC, FC, LC, E2000.
Splice capability is up to a maximum of 48 fibers with splice trays loaded.
Fully compliant with YD/T925—1997 quality management system.
Specifications
|
Mode Type |
Size (mm) |
Max Capacity |
Outer Carton Size (mm) |
Gross Weight (kg) |
Quantity In Carton Pcs |
|
OYI-ODF-SR-1U |
482*300*1U |
24 |
540*330*285 |
17 |
5 |
|
OYI-ODF-SR-2U |
482*300*2U |
48 |
540*330*520 |
21.5 |
5 |
|
OYI-ODF-SR-3U |
482*300*3U |
96 |
540*345*625 |
18 |
3 |
|
OYI-ODF-SR-4U |
482*300*4U |
144 |
540*345*420 |
15.5 |
2 |
Applications
Data communications networks.
Storage area network.
Fiber channel.
FTTx system wide area network.
Test instruments.
CATV networks.
Widely used in FTTH access network.
Operations
Peel the cable, remove the outer and inner housing, as well as any loose tube, and wash off the filling gel, leaving 1.1 to 1.6m of fiber and 20 to 40mm of steel core.
Attach the cable-pressing card to the cable, as well as the cable reinforce steel core.
Guide the fiber into the splicing and connecting tray, secure the heat-shrink tube and splicing tube to one of the connecting fibers. After splicing and connecting the fiber, move the heat-shrink tube and splicing tube and secure the stainless (or quartz) reinforce core member, ensuring that the connecting point is in the middle of the housing pipe. Heat the pipe to fuse the two together. Place the protected joint into the fiber-splicing tray. (One tray can accommodate 12-24 cores)
Lay the remaining fiber evenly in the splicing and connecting tray, and secure the winding fiber with nylon ties. Use the trays from the bottom up. Once all the fibers have been connected, cover the top layer and secure it.
Position it and use the earth wire according to the project plan.
Packing List:
(1) Terminal case main body: 1 piece
(2) Polishing sand paper: 1 piece
(3) Splicing and connecting mark: 1 piece
(4) Heat shrinkable sleeve: 2 to 144 pieces, tie: 4 to 24 pieces
Packaging Information
Inner Packaging
Outer Carton
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex. -
OYI-NOO2 Floor-Mounted Cabinet
-
OYI-FOSC-D109M
The OYI-FOSC-D109M dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 10 entrance ports on the end (8 round ports and 2 oval port). The shell of the product is made from ABS/PC+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
OYI-FAT12B Terminal Box
The 12-core OYI-FAT12B optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT12B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 12 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 12 cores to accommodate the expansion of the box’s usage. -
XPON ONU
1G3F WIFI PORTS is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier class FTTH application provides data service access. 1G3F WIFI PORTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it can access to the EPON OLT or GPON OLT.1G3F WIFI PORTS adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.1G3F WIFI PORTS is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. 1G3F WIFI PORTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.1G3F WIFI PORTS is designed by ZTE chipset 279127. -
SFP-ETRx-4
The ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
