0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-ATB02A Desktop Box
Optic Fiber FTTH Box 2 Cores Type
OYI-ATB02A Desktop Box
Product Features
Water-proof design with IP-45 Protection level.
Integrated with cable termination and management rods.
Manage fibers in a reasonable fiber radius(30mm) condition.
High quality industrial anti-aging ABS plastic material.
Suitable for the wall mounted installation.
Suitable for FTTH indoor application.
2 port cable entrance for drop cable or patch cable.
Fiber adapter can be installed in the rosette for patching.
UL94-V0 fire-retardant material can be customized as option.
Temperature: -40 ℃ to +85 ℃.
Humidity: ≤ 95% (+40 ℃).
Atmospheric pressure: 70KPa to 108KPa.
Box structure: The two-port desktop box consists mainly of the cover and the bottom box. The box structure is shown in the figure.
Specifications
|
Item No. |
Description |
Weight (g) |
Size (mm) |
|
OYI-ATB02A |
For 2pcs SC Simplex Adapter |
31 |
86*86*25 |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White or customer’s request |
||
|
Waterproof |
IP55 |
||
Applications
FTTX access system terminal link.
Widely used in FTTH access network.
Telecommunication networks.
CATV networks.
Data communications networks.
Local area networks.
The Installation Instruction Of The Box
1. Wall installation
1.1 According to the bottom box mounting hole distance on the wall to play two mounting holes, and knock into the plastic expansion sleeve.
1.2 Fix the box to the wall with M8 × 40 screws.
1.3 Check the installation of the box, qualified to cover the lid.
1.4 According to the construction requirements of the introduction of outdoor cable and FTTH drop cable.
2. Open the box
2.1 Hands were holding the cover and the bottom box, a little hard to break out to open the box.
Packaging Information
Quantity: 20pcs/ Inner box, 400pcs/Outer box.
Carton Size: 54*38*52cm.
N.Weight: 22kg/Outer Carton.
G.Weight: 24kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos). -
OYI-FAT-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing,splitting,distribution can be done in this box,and meanwhile it provides solid protection and management for the FTTx network building. -
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
OYI-FOSC-D104H
Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box. -
8 Cores Type OYI-FAT08G Terminal Box
The 8-core OYI-FAT08G optical terminal box mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08G optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. It can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 mini PLC splitter to accommodate the expansion of the box’s usage. -
Fanout Multi-core (4~144F) 0.9mm Connectors Pat...
OYI fiber optic fanout multi-core patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors at each end. Fiber optic patch cables are used in two major application areas: connecting computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, and E2000 (with APC/UPC polish) are all available.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
