Loose Tube Armored Flame-retardant Direct Buried Cable

GYTA53(GYFTA53) / GYTS53(GYFTS53)

Loose Tube Armored Flame-retardant Direct Buried Cable

The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)


Product Detail

FAQ

Product Tags

Product Features

Excellent mechanical and temperature performance.

Resistant to high and low temperature cycles, resulting in anti-aging and a longer lifespan.

Loose tube stranding cable core ensures stable cable structure.

Single steel wire serves as the central strength member to withstand axial loads.

100% core filling with water prevents cable jelly to ensure cable watertightness.

Aluminum tape longitudinally covers cable core as a moisture barrier.

Inner sheath effectively reduces external mechanical loading.

Corrugated steel tape longitudinally covers cable core and provides good crush resistance.

Outer sheath protects cable from ultraviolet radiation.

Optical Characteristics

Fiber Type Attenuation 1310nm MFD

(Mode Field Diameter)

Cable Cut-off Wavelength λcc(nm)
@1310nm(dB/KM) @1550nm(dB/KM)
G652D ≤0.36 ≤0.22 9.2±0.4 ≤1260
G657A1 ≤0.36 ≤0.22 9.2±0.4 ≤1260
G657A2 ≤0.36 ≤0.22 9.2±0.4 ≤1260
G655 ≤0.4 ≤0.23 (8.0-11)±0.7 ≤1450
50/125 ≤3.5 @850nm ≤1.5 @1300nm / /
62.5/125 ≤3.5 @850nm ≤1.5 @1300nm / /

Technical Parameters

Fibre Count Configuration
Tubes×Fibres
Filler Number Cable Diameter
(mm) ±0.5
Cable Weight
(kg/km)
Tensile Strength (N) Crush Resistance (N/100mm) Bend Radius (mm)
Long Term Short Term Long Term Short Term Dynamic Static
6 1×6 5 13.1 195 1000 3000 1000 3000 25D 12.5D
12 2x6 4 13.1 195 1000 3000 1000 3000 25D 12.5D
24 4x6 2 13.1 195 1000 3000 1000 3000 25D 12.5D
36 6x6 0 13.1 195 1000 3000 1000 3000 25D 12.5D
48 4x12 2 13.8 220 1000 3000 1000 3000 25D 12.5D
60 5x12 1 13.8 220 1000 3000 1000 3000 25D 12.5D
72 6x12 0 13.8 220 1000 3000 1000 3000 25D 12.5D
96 8x12 0 15.4 250 1000 3000 1000 3000 25D 12.5D
144 12x12 0 18.0 320 1200 3500 1200 3500 25D 12.5D
192 8x24 0 18.0 330 1200 3500 1200 3500 25D 12.5D
288 12x24 0 20.1 435 1500 4000 1500 4000 25D 12.5D

Application

Long-distance, LAN communication.

Laying Method

Direct burial.

Connecting communication equipments.

Multi-cores wiring system in data center.

Operating Temperature

Temperature Range
Transportation Installation Operation
   -40℃~+70℃    -20℃~+60℃    -40℃~+70℃

Standard

YD/T 901, IEC 60794-3-10

Packing And Mark

OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.

Loose Tube Non-metallic Heavy Type Rodent Protected

The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.

Test report and certification provided.

  • Products Recommended

    • LGX Insert Cassette Type Splitter

      LGX Insert Cassette Type Splitter

      Fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
    • OYI A Type Fast Connector

      OYI A Type Fast Connector

      Our fiber optic fast connector, the OYI A type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, and the structure of the crimping position is a unique design.
    • XPON ONU

      XPON ONU

      1G3F WIFI PORTS is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier class FTTH application provides data service access. 1G3F WIFI PORTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it can access to the EPON OLT or GPON OLT.1G3F WIFI PORTS adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.1G3F WIFI PORTS is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. 1G3F WIFI PORTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.1G3F WIFI PORTS is designed by ZTE chipset 279127.
    • Fiber Optic Accessories Pole Bracket For Fixation Hook

      Fiber Optic Accessories Pole Bracket For Fixati...

      It is a type of pole bracket made of high carbon steel. It is created through continuous stamping and forming with precision punches, resulting in accurate stamping and a uniform appearance. The pole bracket is made of a large diameter stainless steel rod that is single-formed through stamping, ensuring good quality and durability. It is resistant to rust, aging, and corrosion, making it suitable for long-term use. The pole bracket is easy to install and operate without the need for additional tools. It has many uses and can be used in various locations. The hoop fastening retractor can be fastened to the pole with a steel band, and the device can be used to connect and fix the S-type fixing part on the pole. It is light weight and has a compact structure, yet is strong and durable.
    • Direct Bury (DB) 7-way 7/4mm

      Direct Bury (DB) 7-way 7/4mm

      A bundle of micro- or mini-tubes with strengthened wall thickness is encased in a single thin HDPE sheath, forming a duct assembly specifically engineered for fiber optical cable deployment. This robust design enables versatile installation—either retrofitted into existing ducts or directly buried underground—supporting seamless integration into fiber optical cable networks. The micro ducts are optimized for high-efficiency fiber optical cable blowing, featuring an ultra-smooth inner surface with low-friction properties to minimize resistance during air-assisted cable insertion. Each micro duct is color-coded, facilitating quick identification and routing of fiber optical cable types (e.g., single-mode, multi-mode) during network installation and maintenance. As a leading provider of such specialized fiber optic infrastructure solutions, Oyi International., Ltd.—a dynamic, innovation-driven firm headquartered in Shenzhen, China—has been delivering world-class products and end-to-end services since 2006. Backed by a 20+ member R&D team, the company serves 143 countries through long-term partnerships with 268 global clients, offering a comprehensive portfolio including optical fiber cables, integrated solutions like FTTH and ONUs, as well as tailored OEM design and financial support to help customers optimize costs and platform integration.
    • OYI-FOSC-D104H

      OYI-FOSC-D104H

      Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.

    If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

    Facebook

    YouTube

    YouTube

    Instagram

    Instagram

    LinkedIn

    LinkedIn

    tiktok

    Tiktok

    Tiktok

    Whatsapp

    +8618926041961

    Email

    sales@oyii.net