0755-23179541 
sales@oyii.net
FTTH Drop Cable Suspension Tension Clamp S Hook
Hardware Products Overhead Line Fittings
FTTH Drop Cable Suspension Tension Clamp S Hook
OYI offers this tension clamp with appropriate fish type, S-type, and other FTTH clamps. All the assemblies have passed the tensile tests and operation experience with temperatures ranging from -60°C up to +60°C tests.
Product Features
Good insulation properties.
Can be re-entered and reused.
Easy adjustment of cable slack to apply proper tension.
Plastic components are resistant to weather and corrosion.
No special tools are required for installation.
Available in various shapes and colors.
Specifications
| Base Material | Size (mm) | Weight (g) | Cable Size (mm) | Breaking Load (kn) |
| Stainless steel, PA66 | 85*27*22 | 25 | 2*5.0 or 3.0 | 0.7 |
Applications
Fixing drop wire on various house attachments.
Preventing electrical surges from reaching the customer premises.
Supporting various cables and wires.
Packaging Information
Quantity: 300pcs/Outer box.
Carton Size: 40*30*30cm.
N.Weight: 13kg/Outer Carton.
G.Weight: 13.5kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Double FRP reinforced non-metallic central bund...
The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable.
-
OYI-FOSC HO7
The OYI-FOSC-02H horizontal fiber optic splice closure has two connection options: direct connection and splitting connection. It is applicable in situations such as overhead, man-well of pipeline, and embedded situations, among others. Comparing with a terminal box, the closure requires much stricter sealing requirements. Optical splice closures are used to distribute, splice, and store outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
OPERATING MANUAL
Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.
It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design. -
OYI-FOSC-D103H
The OYI-FOSC-D103H dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
The closure has 5 entrance ports on the end (4 round ports and 1 oval port). The shell of the product is made from ABS/PC+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material.
The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
Multi Purpose Beak-out Cable GJBFJV(GJBFJH)
The multi-purpose optical level for wiring uses subunits (900μm tight buffer, aramid yarn as a strength member), where the photon unit is layered on the non-metallic center reinforcement core to form the cable core. The outermost layer is extruded into a low smoke halogen-free material (LSZH, low smoke, halogen-free, flame retardant) sheath.(PVC)
-
OPT-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via 12C, allowing access to all PHY settings and features.
The OPT-ETRx-4 is compatible with 1000BASE-X auto-negotiation, and have a link indication feature. PHY is disabled when TX disable is high or open.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.