0755-23179541 
sales@oyii.net
Male to Female Type FC Attenuator
Fiber Attenuator Series
Male to Female Type FC Attenuator
Product Features
Wide attenuation range.
Low return loss.
Low PDL.
Polarization insensitive.
Various connector types.
Highly reliable.
Specifications
|
Parameters |
Min. |
Typical |
Max |
Unit |
|
|
Operating Wavelength Range |
1310±40 |
mm |
|||
|
1550±40 |
mm |
||||
|
Return Loss |
UPC Type |
50 |
dB |
||
|
APC Type |
60 |
dB |
|||
|
Operating Temperature |
-40 |
85 |
℃ |
||
|
Attenuation Tolerance |
0~10dB±1.0dB |
||||
|
11~25dB±1.5dB |
|||||
|
Storage Temperature |
-40 |
85 |
≥50 |
||
Note: Customized configurations is available upon request.
Applications
Optical fiber communication networks.
Optical CATV.
Fiber network deployments.
Fast/Gigabit Ethernet.
Other data applications requiring high transfer rates.
Packaging Information
1 pc in 1 plastic bag.
1000 pcs in 1 carton box.
Outside carton box Size: 46*46*28.5 cm, Weight: 21kg.
OEM service is available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection.
-
Optic Fiber Terminal Box
Design of hinge and convenient press-pull button lock.
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex. -
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
-
Anchoring Clamp PA3000
The anchoring cable clamp PA3000 is of high quality and durable. This product consists of two parts: a stainless-steel wire and its main material, a reinforced nylon body that is lightweight and convenient to carry outdoors. The clamp’s body material is UV plastic, which is friendly and safe and can be used in tropical environments and is hung and pulled by electroplating steel wire or 201 304 stainless-steel wire. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-17mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees Celsius. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
