0755-23179541
sales@oyii.net.png)
8618926041961
1.25Gbps 1550nm 60Km LC DDM
I-SFP Transceiver
1.25Gbps 1550nm 60Km LC DDM
Iimpawu zeMveliso
1. I-SFP iphakheji enesixhumi se-LC.
2. I-1550nm DFB laser kunye ne-PIN photo detector.
3. Ukudluliselwa kwemoto ukuya kuthi ga kwi-60km kwi-SMF.
4. +3.3V umbane omnye.
5. Ujongano lwedatha yokufaka/yokukhupha oluhambelana ne-LVPECL.
6. I-EMI ephantsi kunye nokhuseleko oluhle kakhulu lwe-ESD.
7. umgangatho wokhuseleko lwelaser ohambelana ne-IEC-60825.
8. Iyahambelana neRoHS.
9. I-Digital Diagnostic SFF-8472 iyahambelana.
10. Umhlaba weSignali oQokelelwe kwiTyala.
Isicelo
1. 1.25Gb/s 1000Base-LXi-Ethernet.
2. Itshaneli yeFiber ye-Dual Rate 1.06 / 2.125 Gb/s.
Uvavanyo olupheleleyo olupheleleyo:
| Ipharamitha | Isimboli | Ubuncinane | Ubuninzi | Iiyunithi |
| Ubushushu bokugcina | I-Tst | -40 | +85 | ℃ |
| I-Voltage yokubonelela | I-Vcc | 0 | +3.6 | V |
| Umswakama osebenzayo | RH | 5 | 95 | % |
Indawo yokusebenza:
| Ipharamitha | Isimboli | Ubuncinci | Okuqhelekileyo | Ubuninzi | Iiyunithi |
| I-Voltage yokubonelela | I-Vcc | 3.15 | 3.3 | 3.45 | V |
| Ubushushu beTyala lokuSebenza | Tc | 0 |
| +70 |
|
| Ukusasazwa kwamandla |
|
|
| 1 | W |
| Ixabiso leDatha |
|
| 1.25 |
| I-Gbps |
Iimpawu zoBuchule
(Ubushushu bokusebenza obuqhelekileyo 0℃ ukuya ku-+70℃, i-Vcc =3.3 V)
| Ipharamitha | Isimboli | Ubuncinci. | Uhlobo. | UMax. | Iiyunithi |
| Umthumeli Icandelo | |||||
| Ubude beWave ephakathi | λo | 1540 | 1550 | 1560 | nm |
| Ububanzi beSpectral (RMS) | △λ | - | - | 1 | nm |
| Amandla Okuphuma Aphakathi | Po | -5 | - | 0 | i-dBm |
| Umlinganiselo wokuphela | Er | 8 | - |
| dB |
| Ukunyuka/Ukuwa Ixesha (20%~80%) | Tr/Tf |
|
| 180 | ps |
| Ixhala elipheleleyo | Tj |
|
| 0.43 | UI |
| Umzobo Wamehlo Obonakalayo | I-IEEE 802.3z kunye ne-ANSI Fiber Channel ziyahambelana | ||||
| Umamkeli Icandelo | |||||
| Ubude beWave ephakathi | λo | 1260 |
| 1620 | nm |
| Uvakalelo loMmkeli | I-Rsen |
|
| -24 | i-dBm |
| Umthwalo Ogqithisileyo Wesamkeli | URov | -3 |
|
| i-dBm |
| Ukulahleka kokubuya |
| 12 |
|
| dB |
| Isiqinisekiso se-LOS | I-LOSA | -36 |
|
| i-dBm |
| Idizethi yaseLos Angeles | I-LOSD |
|
| -25 | i-dBm |
| I-LOS Hysteresis |
| 0.5 |
| 5 | |
Iimpawu zoMbane
(Ubushushu bokusebenza obuqhelekileyo 0℃ ukuya ku-+70℃, i-Vcc =3.3 V)
| Ipharamitha | Isimboli | Ubuncinci. | Uhlobo. | UMax. | iyunithi | |
| Icandelo loMthumeli | ||||||
| Umahluko wokufaka Ukungakhathali | iZin | 90 | 100 | 110 | Ohm | |
| Umahluko we-Swing Input Data | uVin | 500 |
| 2400 | mV | |
| Khubaza i-TX | Khubaza |
| 2.0 |
| I-Vcc | V |
| Nika amandla |
| 0 |
| 0.8 | V | |
| Impazamo ye-TX | Qinisekisa |
| 2.0 |
| I-Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
| Icandelo lomamkeli | ||||||
| Impembelelo yomahluko wemveliso | Zout |
| 100 |
| Ohm | |
| Umahluko we-Swing Input Data | Vout | 370 |
| 2000 | mV | |
| Rx_LOS | Qinisekisa |
| 2.0 |
| I-Vcc | V |
| Deassert |
| 0 |
| 0.8 | V | |
ULWAZI LWE-EEPROM (A0)
| I-Addr | Ubungakanani bentsimi (Iibhayithi) | Igama leSithili | I-HEX | Inkcazo |
| 0 | 1 | Isazisi | 03 | I-SFP |
| 1 | 1 | Isazisi esongezelelweyo | 04 | MOD4 |
| 2 | 1 | Isinxibelelanisi | 07 | LC |
| 3-10 | 8 | I-Transceiver | 00 00 00 02 12 00 0D 01 | Ikhowudi yoMthumeli |
| 11 | 1 | Ukubhala ikhowudi | 01 | 8B10B |
| 12 | 1 | BR, igama eliqhelekileyo | 0D | 1250M bps |
| 13 | 1 | Igciniwe | 00 |
|
| 14 | 1 | Ubude (9um)-km | 3C | 60km |
| 15 | 1 | Ubude (9um) | 64/C8/FF |
|
| 16 | 1 | Ubude (50um) | 00 |
|
| 17 | 1 | Ubude (62.5um) | 00 |
|
| 18 | 1 | Ubude (ubhedu) | 00 |
|
| 19 | 1 | Igciniwe | 00 |
|
| 20-35 | 16 | Igama lomthengisi | 57 49 4E 54 4F 50 20 20 20 20 20 20 20 20 20 20 20 | I-WINTOP |
| 36 | 1 | Igciniwe | 00 |
|
| 37-39 | 3 | I-OUI yomthengisi | 00 00 00 |
|
| 40-55 | 16 | Umthengisi we-PN | xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx | I-ASC II |
| 56-59 | 4 | Umthengisi obhalisiweyo | 31 2E 30 20 | V1.0 |
| 60-61 | 2 | Ubude bamaza | 06 0E | 1550nm |
| 62 | 1 | Igciniwe | 00 |
|
| 63 | 1 | Isiseko seCC | XX | Jonga isixa sebhayithi 0 ~ 62 |
| 64-65 | 2 | Iinketho | 00 1A | LOS, TX_DISABLE, TX_FAULT |
| 66 | 1 | BR, ubuninzi | 32 | 50% |
| 67 | 1 | BR, umzuzu | 32 | 50% |
| 68-83 | 16 | Umthengisi SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | Ayichazwanga |
| 84-91 | 8 | Ikhowudi yomhla womthengisi | XX XX XX 20 | Unyaka, Inyanga, Usuku |
| 92-94 | 3 | Igciniwe | 00 |
|
| 95 | 1 | CC_EXT | XX | Jonga isixa sebhayithi 64~94 |
| 96-255 | 160 | Umthengisi othile |
|
Uxilongo
| Ipharamitha | Uluhlu | Ukuchaneka | Iyunithi | Ukulinganisa |
| Ubushushu | 0～70 | ±3 | ℃ | Yangaphakathi |
| I-Voltage | 3.15～3.45 | 0.1 | V | Yangaphakathi |
| Ucalucalulo lwangoku | 10～80 | ±2 | mA | Yangaphakathi |
| Amandla e-Tx | -6～1 | ±2 | i-dBm | Yangaphakathi |
| Amandla eRx | -26~-3 | ±3 | i-dBm | Yangaphakathi |
Inkcazo yePin
| Iiphini | Igama | Inkcazo | PHAWULA |
| 1 | I-VeeT | Umhlaba womthumeli |
|
| 2 | Impazamo ye-Tx | Isibonakaliso seMpazamo yeTransmitter | 1 |
| 3 | Khubaza i-Tx | Ukukhubaza iTransmitter | 2 |
| 4 | I-MOD DEF2 | Inkcazo yeModyuli 2 | 3 |
| 5 | I-MOD DEF1 | Inkcazo yeModyuli 1 | 3 |
| 6 | I-MOD DEF0 | Inkcazo yeModyuli 0 | 3 |
| 7 | Khetha ixabiso | Ayiqhagamshelwanga |
|
| 8 | I-LOS | Ukulahleka kweSignali | 4 |
| 9 | I-VeeR | Indawo yokwamkela |
|
| 10 | I-VeeR | Indawo yokwamkela |
|
| 11 | I-VeeR | Indawo yokwamkela |
|
| 12 | RD- | I-Inv. Imveliso yeDatha eFunyenweyo | S |
| 13 | RD+ | Iziphumo zeDatha ezifunyenweyo ze-IReceived | S |
| 14 | I-VeeR | Indawo yokwamkela |
|
| 15 | I-VccR | Amandla oMmkeli |
|
| 16 | I-VccT | Amandla okuhambisa |
|
| 17 | I-VeeT | Umhlaba womthumeli |
|
| 18 | TD+ | Dlulisa Idatha Yokufaka | 6 |
| 19 | TD- | Igalelo leDatha yoThumelo lwe-Inv. | 6 |
| 20 | I-VeeT | Umhlaba womthumeli |
Amanqaku:
1. I-TX Fault yimveliso evulekileyo yokuqokelela, ekufuneka itsalwe phezulu nge-resistor ye-4.7k~10kΩ kwibhodi yomncedisi ukuya kwi-voltage ephakathi kwe-2.0V kunye ne-Vcc+0.3V. I-Logic 0 ibonisa ukusebenza okuqhelekileyo; i-logic 1 ibonisa i-laser fault yohlobo oluthile. Kwimeko ephantsi, imveliso iya kutsalwa ibe ngaphantsi kwe-0.8V.
2. I-TX Disable yi-input esetyenziselwa ukuvala i-transmitter optical output. Itsalwa kwi-module nge-resistor ye-4.7k~10kΩ. Iimeko zayo zezi:
Phantsi (0~0.8V): I-transmitter ivuliwe
(>0.8V, <2.0V): Ayichazwanga
Phezulu (2.0~3.3V): I-Transmitter ikhubazekile
Ivuliwe: I-Transmitter ikhutshaziwe
3. I-MOD-DEF 0,1,2 ziiphini zenkcazelo yemodyuli. Zifanele zitsalwe phezulu nge-4.7k~10kΩresistor kwibhodi yomsingathi. I-voltage yokutsalwa phezulu mayibe yi-VccT okanye i-VccR.
I-MOD-DEF 0 isekelwe yimodyuli ukubonisa ukuba imodyuli ikhona.
I-MOD-DEF 1 ngumgca wewotshi we-interface ye-serial yeengcingo ezimbini ze-serial ID.
I-MOD-DEF 2 ngumgca wedatha we-interface ye-serial ye-wire ezimbini ye-serial ID.
4. I-LOS yimveliso evulekileyo yokuqokelela, ekufuneka itsalwe phezulu nge-resistor ye-4.7k~10kΩ kwibhodi yomncedisi ukuya kwi-voltage ephakathi kwe-2.0V kunye ne-Vcc+0.3V. I-Logic 0 ibonisa ukusebenza okuqhelekileyo; i-logic 1 ibonisa ukulahleka kwesiginali. Kwimeko ephantsi, imveliso iya kutsalwa ibe ngaphantsi kwe-0.8V.
5. Ezi ziziphumo ze-differential receiver. Ziyimigca ye-differential ye-100Ω edityaniswe ngaphakathi yi-AC ekufuneka ivalwe nge-100Ω (differential) kwi-SERDES yomsebenzisi.
6. Ezi zi-inputs ze-differential transmitter. Zidibene ne-AC, imigca ye-differential ene-100Ω differential termination ngaphakathi kwimodyuli.
Isekethe yesicelo esicetyiswayo
Ubukhulu boMgca (mm)
-
I-OYI-FOSC H12
Ukuvalwa kwe-OYI-FOSC-04H Horizontal fiber optic splice kuneendlela ezimbini zokudibanisa: ukunxibelelana ngqo kunye nokudibanisa okuqhekekileyo. Zisebenza kwiimeko ezifana ne-overhead, i-manhole yepayipi, kunye neemeko ezifakwe ngaphakathi, njl. Xa kuthelekiswa nebhokisi yesiphelo, ukuvalwa kufuna iimfuno ezingqongqo kakhulu zokuvala. Ukuvalwa kwe-Optical splice kusetyenziselwa ukusasaza, ukudibanisa, kunye nokugcina iintambo ze-optical zangaphandle ezingenayo neziphumayo kwiziphelo zokuvala. Ukuvalwa kuneendawo zokungena ezimbini kunye neendawo zokuphuma ezimbini. Iqokobhe lemveliso lenziwe ngezinto ze-ABS/PC+PP. Ezi ndawo zokuvala zibonelela ngokhuseleko oluhle kakhulu kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68. -
Ibhokisi yesiphelo se-OYI-FAT-10A
Ezi zixhobo zisetyenziswa njengendawo yokuphelisa intambo ye-feeder ukuze idibane nentambo yokulahla kwinkqubo yenethiwekhi yonxibelelwano ye-FTTx. Ukudibanisa ifayibha, ukwahlulahlula, nokusasazwa kungenziwa kule bhokisi, kwaye okwangoku ibonelela ngokhuseleko oluqinileyo kunye nolawulo lolwakhiwo lwenethiwekhi ye-FTTx. -
Isibiyeli sePole ye-UPB Aluminium Alloy Universal Pole
Isibiyeli sepali esiqhelekileyo sisixhobo esisebenzayo esidlala indima ebalulekileyo kumashishini ahlukeneyo. Senziwe kakhulu nge-aluminium alloy, esinika amandla aphezulu oomatshini, okwenza ukuba sibe semgangathweni ophezulu kwaye sihlale ixesha elide. Uyilo lwayo olukhethekileyo olunelungelo lomenzi luvumela ukufakwa kwezixhobo eziqhelekileyo ezinokugubungela zonke iimeko zokufakelwa, nokuba zikwiipali zomthi, zesinyithi, okanye zekhonkrithi. Sisetyenziswa ngeebhendi zentsimbi engagqwaliyo kunye namabhonkco ukulungisa izixhobo zekhebula ngexesha lokufakwa. -
I-OYI-FOSC-H20
Ukuvalwa kwe-OYI-FOSC-H20 dome fiber optic splice kusetyenziswa kwizicelo zomoya, zokufakelwa eludongeni, kunye nezomhlaba phantsi komhlaba kwi-splice ethe tye neyamasebe yentambo yefayibha. Ukuvalwa kwe-dome splicing lukhuselo oluhle kakhulu lwe-fiber optic joints kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungenako ukuvuza kunye nokukhuselwa kwe-IP68. -
I-OYI-FOSC-D109M
Ukuvalwa kwe-OYI-FOSC-D109M dome fiber optic splice kusetyenziswa kwi-aerial, ukufakelwa eludongeni, kunye nokusetyenziswa komhlaba kwi-splice ethe tye neyamasebe yentambo yefayibha. Ukuvalwa kwe-dome splicing kukukhusela kakhulu amalungu e-fiber optic kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68. Ukuvalwa kuneendawo zokungena ezili-10 ekupheleni (ii-port ezi-8 ezijikelezileyo kunye nee-port ezi-2 ezi-oval). Igobolondo lemveliso lenziwe ngezinto ze-ABS/PC+ABS. Igobolondo kunye nesiseko zivaliwe ngokucinezela irabha ye-silicone nge-clamp ebekiweyo. Ii-port zokungena zivaliwe ngeetyhubhu ezinciphayo ngobushushu. Ukuvalwa kunokuvulwa kwakhona emva kokuba kuvaliwe kwaye kusetyenziswe kwakhona ngaphandle kokutshintsha izinto zokuvala. Ulwakhiwo oluphambili lokuvalwa luquka ibhokisi, i-splicing, kwaye inokulungiswa ngee-adapters kunye ne-optical splitters. -
Ibhokisi yeDesktop ye-OYI-ATB02B
Ibhokisi yesiphelo seeport ezimbini ze-OYI-ATB02B iphuhlisiwe kwaye iveliswa yinkampani ngokwayo. Ukusebenza kwemveliso kuyahlangabezana neemfuno zemigangatho yoshishino i-YD/T2150-2010. Ifanelekile ukufaka iintlobo ezininzi zeemodyuli kwaye ingasetyenziswa kwinkqubo yocingo yendawo yokusebenza ukuze kufezekiswe ukufikelela kwi-fiber e-dual-core kunye ne-port output. Ibonelela ngezixhobo zokulungisa i-fiber, ukususa, ukuhlanganisa, kunye nokukhusela, kwaye ivumela inani elincinci le-fiber engafunekiyo, okwenza ukuba ifaneleke kwiinkqubo ze-FTTD (i-fiber kwi-desktop). Isebenzisa isakhelo somphezulu esifakwe ngaphakathi, kulula ukuyifaka kunye nokuyiqhekeza, inomnyango okhuselayo kwaye ayinaluthuli. Ibhokisi yenziwe ngeplastiki ye-ABS ekumgangatho ophezulu ngokusebenzisa i-injection molding, okwenza ukuba ingabi nokungqubana, ithintele ilangabi, kwaye imelane kakhulu nempembelelo. Ineempawu ezilungileyo zokuvala kunye nokulwa nokuguga, ikhusela ukuphuma kwentambo kwaye isebenza njengesikrini. Ingafakwa eludongeni.
Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.
