0755-23179541
sales@oyii.net.png)
8618926041961
I-Direct Bury (DB) eneendlela ezi-4 14/10mm
Inqwaba yeThubhu yeHDPE
I-Direct Bury (DB) eneendlela ezi-4 14/10mm
Iimpawu zeMveliso
Ubungakanani be-tube bundle bumele bube:
| 1) | Umbhobho Omncinane Wangaphakathi: | 14/10mm |
| 2) | Ububanzi obungaphandle: | 30.4mm * 30.4mm (± 0.5mm) |
| 3) | Ubukhulu besheathing: | 1.2mm |
(IsiNgesi)Umfanekiso 1）
Amagqabaza:I-Ripcord ayinyanzelekanga.
Iimpahla ezingekasilwa:
I-HDPE yohlobo olune-molekyuli ephezulu enezi parameter zilandelayo isetyenziselwa ukuvelisa i-Tube Bundle:
Isalathisi sokuhamba komoya onyibilikayo: 0.1～0.4 g/10 imizuzu EN ISO 1133
(190 °C, 2.16 KG)
Ubuninzi: Ubuncinane yi-0.940 g/cm3I-ISO 1183
Amandla okutsalwa xa ivunwa: Ubuncinci be-20MPa ISO 527
Ukwandiswa ngexesha lokuphumla: Ubuncinane be-350% ISO 527
Ukumelana noxinzelelo lwendalo esingqongileyo kunye neentanda (F)50) Ubuncinane beeyure ezingama-96 ze-ISO 4599
Ulwakhiwo
1.Isingxobo se-PE: Isingxobo sangaphandle senziwe ngombalaI-HDPE, ayinayo i-halogen. Umbala oqhelekileyo wesheath yangaphandle yiorenji. Omnye umbala unokwenzeka xa umthengi ecela.
2. Umjelo omncinci: Umjelo omncinci wenziwe nge-HDPE, ukhutshwe ngezinto ezisemgangathweni eziyi-100%. Umbala kufuneka ube luhlaza okwesibhakabhaka (umjelo ophakathi), obomvu, oluhlaza, otyheli, omhlophe, ongwevu, o-orenji okanye ezinye izinto ezenziwe ngokwezifiso.
Iiparameters zobugcisa
Itheyibhile 1: Ukusebenza koomatshini kwe-inner micro duct Φ14/10mm
| Iposi. | Ukusebenza koomatshini | Iimeko zovavanyo | Ukusebenza | Umgangatho |
| 1 | Amandla okuxinana xa ephuma | Izinga lolwandiso: 100mm/ngomzuzu | ≥1400N | I-IEC 60794-1-2 Indlela E1 |
| 2 | Ukutyumza | Ubude besampulu: 250mm Umthwalo: 1400N Ubude bomthwalo ophezulu: imizuzu e-1 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E3 |
| 3 | Kink | ≤140mm | - | I-IEC 60794-1-2 Indlela E10 |
| 4 | Impembelelo | Irediyasi yomphezulu ochukumisayo: 10mm Amandla empembelelo: 1J Inani lempembelelo: amaxesha ama-3 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Xa kujongwa ngamehlo, akuyi kubakho monakalo kwi-micro duct. | I-IEC 60794-1-2 Indlela E4 |
| 5 | Irediyasi egobileyo | Inani leenguqu: 5 Ububanzi beMandrel: 168mm Ninani lemijikelo: 3 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E11 |
| 6 | Ukungqubana | / | ≤0.1 | Umgca we-M |
Itheyibhile 2: Ukusebenza koomatshini kweTube Bundle
| Iposi. | Into | Inkcazo | |
| 1 | Inkangeleko | Udonga olungaphandle oluthambileyo (oluzinzileyo nge-UV) ngaphandle kokungcola okubonakalayo; umbala olinganisiweyo kakuhle, akukho maqamza okanye imifantu; kunye neempawu ezichaziweyo eludongeni olungaphandle. | |
| 2 | Tensile strength | Sebenzisa iisokisi zokutsala ukuze uqinise isampuli ngokwetheyibhile engasezantsi: Ubude besampulu: 1m Isantya sokutsalwa: 20mm/min Umthwalo: 4000N Ubude boxinzelelo: 5 min. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 3 | Ukumelana nokutyumza | Isampulu engama-250mm emva kwexesha lokulayisha umzuzu omnye kunye nexesha lokubuyisela iyure e-1. Umthwalo (ipleyiti) kufuneka ube yi-2000N. Ushicilelo lwepleyiti ekwisigqubuthelo aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| Iposi. | Into | Inkcazo |
|
| 4 | Impembelelo | Irediyasi yomphezulu obethayo mayibe yi-10mm kwaye amandla okubetha abe yi-5J. Ixesha lokubuyisela kufuneka libe linye. Ushicilelo lomphezulu obethayo kwi-micro duct aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 5 | Goba | Ububanzi be-mandrel bube yi-40X OD yesampulu, iinguqu ezi-4, imijikelo emi-3. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
Ubushushu bokugcina
Iipakeji ezigqityiweyo ze-HDPE Tube Bundle kwiidrama zingagcinwa ngaphandle ubuninzi beenyanga ezi-6 ngomhla wokuveliswa.
Ubushushu bokugcina: -40°C～+70°C
Ubushushu bokufakelwa: -30°C～+50°C
Ubushushu bokusebenza: -40°C～+70°C
-
I-GYFXTH-2/4G657A2
-
Ibhokisi yesiphelo se-OYI-FAT-10A
Ezi zixhobo zisetyenziswa njengendawo yokuphelisa intambo ye-feeder ukuze idibane nentambo yokulahla kwinkqubo yenethiwekhi yonxibelelwano ye-FTTx. Ukudibanisa ifayibha, ukwahlulahlula, nokusasazwa kungenziwa kule bhokisi, kwaye okwangoku ibonelela ngokhuseleko oluqinileyo kunye nolawulo lolwakhiwo lwenethiwekhi ye-FTTx. -
Ibhokisi yeDeskithophu ye-OYI-ATB02A
Ibhokisi yedesktop ye-OYI-ATB02A 86 enezibuko ezimbini iphuhlisiwe kwaye iveliswa yinkampani ngokwayo. Ukusebenza kwemveliso kuyahlangabezana neemfuno zemigangatho yoshishino i-YD/T2150-2010. Ifanelekile ukufaka iintlobo ezininzi zeemodyuli kwaye ingasetyenziswa kwinkqubo yocingo yendawo yokusebenza ukuze kufezekiswe ukufikelela kwifayibha e-dual-core kunye nemveliso yezibuko. Ibonelela ngezixhobo zokulungisa ifayibha, ukususa, ukuhlanganisa, kunye nokukhusela, kwaye ivumela inani elincinci lempahla yefayibha engafunekiyo, okwenza ifaneleke kwiinkqubo ze-FTTD (ifayibha kwidesktop). Ibhokisi yenziwe ngeplastiki ye-ABS ekumgangatho ophezulu ngokusebenzisa i-injection molding, okwenza ukuba ingabi nokungqubana, ithintele ilangabi, kwaye imelane kakhulu nempembelelo. Ineempawu ezilungileyo zokuvala kunye nokulwa nokuguga, ikhusela ukuphuma kwentambo kwaye isebenza njengesikrini. Ingafakwa eludongeni. -
Uhlobo lweKlampu yokuSuswa kwe-ADSS A
Iyunithi yokumiswa kwe-ADSS yenziwe ngezinto zentsimbi yesinyithi eqinisiweyo kakhulu, ezinokumelana nokugqwala okuphezulu kwaye zinokwandisa ixesha lokusetyenziswa. Iziqwenga zerabha ezithambileyo ziphucula ukuzithambisa kwaye zinciphise ukurhawuzelelwa. -
I-adaptha ye-SC / FC / LC / ST Hybrid
I-adapter ye-fiber optic, ngamanye amaxesha ebizwa ngokuba yi-coupler, sisixhobo esincinci esenzelwe ukuphelisa okanye ukudibanisa iintambo ze-fiber optic okanye izihlanganisi ze-fiber optic phakathi kwemigca emibini ye-fiber optic. Iqulethe isingxobo sokudibanisa esibamba ii-ferrules ezimbini kunye. Ngokudibanisa ngokuchanekileyo izihlanganisi ezimbini, ii-adapter ze-fiber optic zivumela imithombo yokukhanya ukuba idluliselwe ngokukhawuleza kwaye inciphise ilahleko kangangoko kunokwenzeka. Kwangaxeshanye, ii-adapter ze-fiber optic zinezibonelelo zokulahleka okuphantsi kokufakwa, ukutshintshwa okuhle, kunye nokuphindaphinda. Zisetyenziselwa ukudibanisa izihlanganisi ze-fiber optic ezifana ne-FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, njl. Zisetyenziswa kakhulu kwizixhobo zonxibelelwano ze-fiber optic, izixhobo zokulinganisa, njl. Ukusebenza kuzinzile kwaye kuthembekile. -
I-OYI-FOSC-H06
Ukuvalwa kwe-OYI-FOSC-01H ethe tyaba ye-fiber optic splice kuneendlela ezimbini zokudibanisa: ukunxibelelana ngqo kunye nokudibanisa okuqhekekileyo. Zisebenza kwiimeko ezifana ne-overhead, i-man-well yepayipi, imeko efakwe ngaphakathi, njl. Xa kuthelekiswa nebhokisi yesiphelo, ukuvalwa kufuna iimfuno ezingqongqo kakhulu zesitywino. Ukuvalwa kwe-Optical splice kusetyenziselwa ukusasaza, ukudibanisa, kunye nokugcina iintambo ze-optical zangaphandle ezingenayo neziphumayo kwiziphelo zokuvala. Ukuvalwa kuneendawo ezimbini zokungena. Iqokobhe lemveliso lenziwe ngezinto ze-ABS+PP. Ezi zivalo zibonelela ngokhuseleko oluhle kakhulu kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68.
Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.
