Ufakelo oluQokeleyo (DI) 24-way 8/5mm+1-way 10/8mm (PE Sheath 1.7mm)

Inqwaba yeThubhu yeHDPE

Ufakelo oluQokeleyo (DI) 24-way 8/5mm+1-way 10/8mm (PE Sheath 1.7mm)

Inqwaba yeetyhubhu ezincinci okanye ezincinci ezinobukhulu bodonga obuqinisiweyo igqunywe ngesixhobo esinye esincinciI-HDPE isikhongozeli, esenza indibano yemibhobho eyenzelwe ngokukodwa intambo ye-fiber optical Olu yilo luqinileyo lwenza ukuba ufakelo oluguquguqukayo—nokuba lufakwe kwakhona kwiipayipi ezikhoyo okanye lufakwe ngqo phantsi komhlaba—luxhasa ukuhlanganiswa okungenamthungo kwiinethiwekhi zentambo ze-fiber optical.

Ii-micro ducts zenzelwe ukuvuthela iintambo ze-fiber optical ezisebenza kakuhle kakhulu, zinomphezulu wangaphakathi ogudileyo kakhulu oneempawu zokungqubana okuphantsi ukunciphisa ukumelana ngexesha lokufakwa kweentambo ezincediswa ngumoya. I-micro duct nganye inemibala ngokweMifanekiso 1, nto leyo enceda ekuchongeni ngokukhawuleza nasekuhambiseni iintlobo zeentambo ze-fiber optical (umz., i-single-mode, i-multi-mode) ngexeshainethiwekhi ukufakwa kunye nokugcinwa.

QHAGAMSHELANA NATHI I-WhatsApp i-imeyile

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Iimpawu zeMveliso

Ubungakanani be-tube bundle bumele bube:

1)	Umbhobho Omncinane Wangaphakathi:	10/8mm (umbhobho ophakathi) 8/5mm
2)	Ububanzi obungaphandle:	48.4mm (±s1.1mm)
3)	Ubukhulu besheathing:	1.7mm

(IsiNgesi)Umfanekiso 1）

Amagqabaza:I-Ripcord ayinyanzelekanga.

Iimpahla ezingekasilwa:

I-HDPE yohlobo olune-molekyuli ephezulu enezi parameter zilandelayo isetyenziselwa ukuvelisa i-Tube Bundle:

Isalathisi sokuhamba komoya onyibilikayo: 0.1～0.4 g/10 imizuzu NISO 1133(190 °C, 2.16 KG)

Ubuninzi: Ubuncinane yi-0.940 g/cm³I-ISO 1183

Amandla okutsalwa xa ivunwa: Ubuncinci be-20MPa ISO 527

Ukwandiswa ngexesha lokuphumla: Ubuncinane be-350% ISO 527

Ukumelana noxinzelelo lwendalo esingqongileyo kunye nokuqhekeka (F50) Ubuncinane beeyure ezingama-96 ISO 4599

Ulwakhiwo

1.Isingxobo se-PE: Isingxobo sangaphandle senziwe ngombalaI-HDPE, ayinayo i-halogen. Umbala oqhelekileyo wesheath yangaphandle yiorenji. Omnye umbala unokwenzeka xa umthengi ecela.

2. Umjelo omncinci: Umjelo omncinci wenziwe nge-HDPE, ukhutshwe ngezinto ezisemgangathweni eziyi-100%. Umbala kufuneka ube luhlaza okwesibhakabhaka (umjelo ophakathi), obomvu, oluhlaza, otyheli, omhlophe, ongwevu, o-orenji okanye ezinye izinto ezenziwe ngokwezifiso.

Iiparameters zobugcisa

Itheyibhile 1: Ukusebenza koomatshini kwe-inner micro duct Φ8/5mm

Iposi.	Ukusebenza koomatshini	Iimeko zovavanyo	Umdlali weqonga ce	Umgangatho
1	Amandla okuxinana xa ephuma	Izinga lolwandiso: 100mm/ngomzuzu	≥180N	I-IEC 60794-1-2 Indlela E1
2	Ukutyumza	Ubude besampulu: 250mm Umthwalo: 550N Ubude bomthwalo ophezulu: imizuzu e-1 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1	Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%.	I-IEC 60794-1-2 Indlela E3
3	Kink	≤50mm	-	I-IEC 60794-1-2 Indlela E10
4	Impembelelo	Irediyasi yomphezulu ochukumisayo: 10mm Amandla empembelelo: 1J Inani lempembelelo: amaxesha ama-3 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1	Xa kujongwa ngamehlo, akuyi kubakho monakalo kwi-micro duct.	I-IEC 60794-1-2 Indlela E4
5	Irediyasi egobileyo	Inani leenguqu: 5 Ububanzi beMandrel: 60mm ninani lemijikelo: 3	Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%.	I-IEC 60794-1-2 Indlela E11
6	Ukungqubana	/	≤0.1	Umgca we-M

Itheyibhile 2: Ukusebenza koomatshini kwe-inner micro duct Φ10/8mm

Iposi.	Ukusebenza koomatshini	Iimeko zovavanyo	Ukusebenza	Umgangatho
1	Amandla okuxinana xa ephuma	Izinga lolwandiso: 100mm/ngomzuzu	≥520N	I-IEC 60794-1-2 Indlela E1
2	Ukutyumza	Ubude besampulu: 250mm Umthwalo: 460N Ubude bomthwalo ophezulu: imizuzu e-1 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1	Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%.	I-IEC 60794-1-2 Indlela E3
3	Kink	≤100mm	-	I-IEC 60794-1-2 Indlela E10
4	Impembelelo	Irediyasi yomphezulu ochukumisayo: 10mm Amandla empembelelo: 1J Inani lempembelelo: amaxesha ama-3 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1	Xa kujongwa ngamehlo, akuyi kubakho monakalo kwi-micro duct.	I-IEC 60794-1-2 Indlela E4
5	Irediyasi egobileyo	Inani leenguqu: 5 Ububanzi beMandrel: 120mm Inani lemijikelo: 3	Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%.	I-IEC 60794-1-2 Indlela E11
6	Ukungqubana	/	≤0.1	Umgca we-M

Itheyibhile 3: Ukusebenza koomatshini kweTube Bundle

Iposi.	Into	Inkcazo
1	Inkangeleko	Udonga olungaphandle oluthambileyo (oluzinzileyo nge-UV) ngaphandle kokungcola okubonakalayo; umbala olinganisiweyo kakuhle, akukho maqamza okanye imifantu; kunye neempawu ezichaziweyo eludongeni olungaphandle.
2	Tensile strength	Sebenzisa iisokisi zokutsala ukuze uqinise isampuli ngokwetheyibhile engasezantsi: Ubude besampulu: 1m Isantya sokutsalwa: 20mm/min Umthwalo: 4200N Ubude boxinzelelo: 5 min.	Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly.
3	Ukumelana nokutyumza	Isampulu engama-250mm emva kwexesha lokulayisha umzuzu omnye kunye nexesha lokubuyisela iyure e-1. Umthwalo (ipleyiti) kufuneka ube yi-1000N. Ushicilelo lwepleyiti ekwisigqubuthelo aluthathwa njengomonakalo woomatshini.	Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly.
4	Impembelelo	Irediyasi yomphezulu obethayo mayibe yi-10mm kwaye amandla okubetha abe yi-5J. Ixesha lokubuyisela kufuneka libe linye. Ushicilelo lomphezulu obethayo kwi-micro duct aluthathwa njengomonakalo woomatshini.	Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly.
5	Goba	Ububanzi be-mandrel bube yi-40X OD yesampulu, iinguqu ezi-4, imijikelo emi-3.	Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly.

Ubushushu bokugcina

Iipakeji ezigqityiweyo ze-HDPE Tube Bundle kwiidrama zingagcinwa ngaphandle ubuninzi beenyanga ezi-6 ngomhla wokuveliswa.

Ubushushu bokugcina: -40°C～+70°C

Ubushushu bokufakelwa: -30°C～+50°C

Ubushushu bokusebenza: -40°C～+70°C

Iimveliso ezicetyiswayo

I-OYI-FOSC-D109H

Ukuvalwa kwe-OYI-FOSC-D109H dome fiber optic splice kusetyenziswa kwi-aerial, ukufakelwa eludongeni, kunye nokusetyenziswa komhlaba kwi-splice ethe tye neyamasebe yentambo yefayibha. Ukuvalwa kwe-dome splicing kukukhusela kakhulu amalungu e-fiber optic kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68. Ukuvalwa kuneendawo zokungena ezili-9 ekupheleni (ii-port ezi-8 ezijikelezileyo kunye ne-port e-oval e-1). Igobolondo lemveliso lenziwe ngezinto ze-PP+ABS. Igobolondo kunye nesiseko zivaliwe ngokucinezela irabha ye-silicone nge-clamp ebekiweyo. Iindawo zokungena zivaliwe ngeetyhubhu ezinciphayo ngobushushu. Ukuvalwa kunokuvulwa kwakhona emva kokuba kuvaliwe kwaye kusetyenziswe kwakhona ngaphandle kokutshintsha izinto zokuvala. Ulwakhiwo oluphambili lokuvalwa luquka ibhokisi, i-splicing, kwaye inokulungiswa ngee-adapters kunye ne-optical splitters.

BONA OKUNGAKUMBI
Iintambo zeSithungo seMPO / MTP

Iintambo ze-Oyi MTP/MPO Trunk kunye ne-Fan-out trunk patch zibonelela ngendlela efanelekileyo yokufaka inani elikhulu leentambo ngokukhawuleza. Ikwabonelela ngokuguquguquka okuphezulu ekukhupheni nasekusebenziseni kwakhona. Ifanelekile ngokukodwa kwiindawo ezifuna ukuthunyelwa ngokukhawuleza kweentambo ze-backbone ezinoxinano oluphezulu kwiindawo zedatha, kunye neendawo ezine-fiber ephezulu ukuze isebenze kakuhle. Intambo ye-MPO/MTP branch fan-out yethu isebenzisa iintambo ze-fiber ezininzi ezinoxinano oluphezulu kunye nesixhumi se-MPO/MTP ngokusebenzisa isakhiwo sesebe esiphakathi ukuze kufezekiswe utshintsho lwesebe ukusuka kwi-MPO/MTP ukuya kwi-LC, SC, FC, ST, MTRJ kunye nezinye izixhumi eziqhelekileyo. Iintambo ezahlukeneyo ze-optical ze-4-144 ezinemowudi enye kunye ne-multi-mode zingasetyenziswa, njengefayibha eqhelekileyo ye-G652D/G657A1/G657A2 enemowudi enye, intambo ye-multimode 62.5/125, i-10G OM2/OM3/OM4, okanye intambo ye-multimode ye-10G ene-high bend performance njalo njalo. Ifanelekile ukuqhagamshelwa ngqo kweentambo zesebe ze-MTP-LC–isiphelo esinye yi-40Gbps QSFP+, kwaye esinye isiphelo yi-10Gbps SFP+ ezine. Olu qhagamshelo lubolisa i-40G enye ibe yi-10G ezine. Kwiindawo ezininzi ze-DC ezikhoyo, iintambo ze-LC-MTP zisetyenziselwa ukuxhasa iifayibha ze-backbone ezinoxinano oluphezulu phakathi kweeswitshi, iiphaneli ezifakwe kwi-rack, kunye neebhodi zentambo eziphambili zokusasaza.

BONA OKUNGAKUMBI
Uhlobo lwe-OYI-OCC-C

I-Fiber optic distribution terminal sisixhobo esisetyenziswa njengesixhobo soqhagamshelo kwinethiwekhi yokufikelela kwi-fiber optic yentambo ye-feeder kunye nentambo yokusasaza. Iintambo ze-Fiber optic zixhunywa ngokuthe ngqo okanye zipheliswe kwaye zilawulwa ziintambo ze-patch ukuze zisasazwe. Ngophuhliso lwe-FTTX, iikhabhathi zoqhagamshelo lwentambo yangaphandle ziya kufakwa ngokubanzi kwaye zisondele kumsebenzisi wokugqibela.

BONA OKUNGAKUMBI
Isixhumi esikhawulezayo sohlobo lwe-OYI D

Uhlobo lwethu lwe-fiber optic fast connector OYI D luyilelwe i-FTTH (Fiber To The Home), i-FTTX (Fiber To The X). Sisizukulwana esitsha se-fiber connector esetyenziswa ekuhlanganiseni kwaye sinokubonelela ngeentlobo ze-open flow kunye ne-precast, kunye neenkcukacha ze-optical kunye ne-mechanical ezihlangabezana nomgangatho we-optical fiber connectors. Yenzelwe umgangatho ophezulu kunye nokusebenza kakuhle ngexesha lokufakwa.

BONA OKUNGAKUMBI
Ibhokisi yeDesktop ye-OYI-ATB02B

Ibhokisi yesiphelo seeport ezimbini ze-OYI-ATB02B iphuhlisiwe kwaye iveliswa yinkampani ngokwayo. Ukusebenza kwemveliso kuyahlangabezana neemfuno zemigangatho yoshishino i-YD/T2150-2010. Ifanelekile ukufaka iintlobo ezininzi zeemodyuli kwaye ingasetyenziswa kwinkqubo yocingo yendawo yokusebenza ukuze kufezekiswe ukufikelela kwi-fiber e-dual-core kunye ne-port output. Ibonelela ngezixhobo zokulungisa i-fiber, ukususa, ukuhlanganisa, kunye nokukhusela, kwaye ivumela inani elincinci le-fiber engafunekiyo, okwenza ukuba ifaneleke kwiinkqubo ze-FTTD (i-fiber kwi-desktop). Isebenzisa isakhelo somphezulu esifakwe ngaphakathi, kulula ukuyifaka kunye nokuyiqhekeza, inomnyango okhuselayo kwaye ayinaluthuli. Ibhokisi yenziwe ngeplastiki ye-ABS ekumgangatho ophezulu ngokusebenzisa i-injection molding, okwenza ukuba ingabi nokungqubana, ithintele ilangabi, kwaye imelane kakhulu nempembelelo. Ineempawu ezilungileyo zokuvala kunye nokulwa nokuguga, ikhusela ukuphuma kwentambo kwaye isebenza njengesikrini. Ingafakwa eludongeni.

BONA OKUNGAKUMBI
1.25Gbps 1550nm 60Km LC DDM

Ii-transceivers ze-SFP ziimodyuli ezisebenza kakuhle nezingabizi kakhulu ezixhasa isantya sedatha se-1.25Gbps kunye nomgama wokudluliselwa kwe-60km kunye ne-SMF. I-transceiver inamacandelo amathathu: i-SFP laser transmitter, i-PIN photodiode edityaniswe ne-trans-impedance preamplifier (TIA) kunye neyunithi yolawulo lwe-MCU. Zonke iimodyuli ziyahlangabezana neemfuno zokhuseleko lwe-laser yeklasi yoku-1. Ii-transceivers ziyahambelana ne-SFP Multi-Source Agreement kunye nemisebenzi ye-SFF-8472 yedijithali yokuxilonga.

BONA OKUNGAKUMBI

Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.

BUZA