0755-23179541
sales@oyii.net.png)
8618926041961
I-XPON ONU
I-XPON ONU
IIPHOTHI ZE-WIFI ZE-1G3F
Ingcaciso yeMveliso
I-1G3F WIFI PORTS yenzelwe ukuba yi-HGU (Home Gateway Unit) ngeendlela ezahlukeneyo.Izisombululo ze-FTTH; usetyenziso lwe-FTTH lweklasi yomthwali lubonelela ngokufikelela kwinkonzo yedatha. I-1G3F WIFI PORTS isekelwe kubuchwepheshe be-XPON obuvuthiweyo nobuzinzileyo, obungabizi kakhulu. Ingatshintsha ngokuzenzekelayo nge-EPON kunye ne-GPON mode xa itshintsha.ikaniukufikelela kwiI-EPON OLTokanyeI-GPON OLTI-.1G3F WIFI PORTS isebenzisa ukuthembeka okuphezulu, ulawulo olulula, ukuguquguquka koqwalaselo kunye nomgangatho olungileyo wenkonzo (QoS) iqinisekisa ukuhlangabezana nokusebenza kobugcisa kwemodyuli ye-China Telecom EPON CTC3.0.
I-1G3F WIFI PORTS iyahambelana ne-IEEE802.11n STD, iyasetyenziswa nge-2x2 MIMO, elona xabiso liphezulu ukuya kuthi ga kwi-300Mbps. I-1G3F WIFI PORTS iyahambelana ngokupheleleyo nemigaqo yobugcisa efana ne-ITU-T G.984.x kunye ne-IEEE802.3ah. I-1G3F WIFI PORTS iyilwe yi-ZTE chipset 279127..
Iimpawu zeMveliso
1. Ixhasa iModi eDual (inokufikelela kwiGPON/EPON OLT).
2. Ixhasa imigangatho ye-GPON G.984/G.988.
3. Inkxaso yeProtokholi ye-SIP yeNkonzo yeVoIP.
4. Uvavanyo lwemigca oludibeneyo luhambelana ne-GR-909 kwi-PORTS.
5. Inkxaso yomsebenzi we-802.11n WIFI (2x2 MIMO).
6. Inkxaso ye-NAT, umsebenzi we-Firewall.
7. Ulawulo lokuHamba kweNkxaso kunye neSiphepho, ukuFumanisa iLoop, ukuThunyelwa kwePort kunye nokuFumanisa iLoop.
8. Imo ye-port yenkxaso yoqwalaselo lwe-VLAN.
9. Inkxaso ye-LAN IP kunye noqwalaselo lweSeva ye-DHCP.
10.Inkxaso yoCwangciso olukude lwe-TR069 kunye noLawulo lweWEB.
11.Indlela yokuxhasa i-PPPoE/IPoE/DHCP/i-IP engashukumiyo kunye ne-Bridge mixed mode.
12.Xhasa i-IPv4/IPv6 dual stack.
13.Inkxaso ye-IGMP ecacileyo/ejongeka/emeleyo.
14.Iyahambelana nomgangatho we-IEEE802.3ah.
15.Iyahambelana ne-OLT edumileyo (HW, ZTE...).
Inkcazo
| Into yoBugcisa | Iinkcukacha |
| Ujongano lwePON | Izibuko le-E/GPON (EPON PX20+ kunye ne-GPON Class B+) Phezulu: 1310nm; Phantsi: 1490nm SC/APC connector Ukwamkela uvakalelo: ≤-28dBm Ukudlulisa amandla okukhanya: 0.5～+4dBm Umgama wokudlulisa: 20KM |
| Ujongano lwe-LAN | 1x10/100/1000Mbps kunye 3x10/100Mbps autoFull/Half, RJ45 isidibanisi |
| Ujongano lwe-WIFI | ii-adaptiveEthernetinterfaces. Iyahambelana ne-IEEE802.11b/g/nIsantya sokusebenza: 2.400 - 2.4835GHz inkxaso ye-MIMO, isantya ukuya kuthi ga kwi-300Mbps2T2R, ii-antenna ezimbini zangaphandle 5dBiInkxaso: Ii-SSIDChannel ezininzi: 13Uhlobo lweModulation: DSSS、CCK kunye ne-OFDMEInkqubo yokukhowuda: BPSK、QPSK、16QAM kunye ne-64QAM |
| Izibuko lezibuko | Umgama we-RJ11Max 1km, iRingi eBalanced, i-50V RMS |
| I-LED | I-LED ezili-10, yemeko ye-WIFI, i-WPS, i-PWR, i-LOS, i-PON, i-LAN1 - i-LAN4, i-FXS |
| Iqhosha lokucofa | 3, malunga nomsebenzi wokuvula/ukucima umbane, ukuseta kwakhona, i-WPS |
| Imeko yokusebenza | Ubushushu: 0℃～+50℃ Ukufuma: 10%～90% (ayifumi) |
| Imeko Yokugcina | Ubushushu: - 40℃～+60℃ Ukufuma: 10%～90% (ayifumi) |
| Ukunikezwa Amandla | I-DC 12V/1A |
| Ukutya umbane | ≤6W |
| Ukusinda okushiyekile | ≤0.4Kg |
Izibane zephaneli kunye neNtshayelelo
| Isibane soMqhubi | Imeko | Inkcazo |
| I-WIFI | On | I-interface ye-WIFI ivuliwe. |
| I-Blink | I-interface ye-WIFI ithumela okanye yamkela idatha (ACT). | |
| Icinyiwe | I-interface ye-WIFI ayisebenzi. | |
| I-WPS | I-Blink | I-interface ye-WIFI iseka uqhagamshelo ngokukhuselekileyo. |
| Icinyiwe | I-interface ye-WIFI ayimiseli uqhagamshelo olukhuselekileyo. | |
| I-PWR | On | Isixhobo sivuliwe. |
| Icinyiwe | Isixhobo sivuliwe. | |
| I-LOS | I-Blink | Iidosi zesixhobo azifumani zimpawu zokukhanya okanye ezinezibonakaliso eziphantsi. |
| Icinyiwe | Isixhobo sifumene isignali yokukhanya. | |
| I-PON | On | Esi sixhobo sibhalisiwe kwinkqubo yePON. |
| I-Blink | Esi sixhobo sibhalisa inkqubo ye-PON. | |
| Icinyiwe | Ubhaliso lwesixhobo aluchanekanga. | |
| I-LAN1~LAN4 | On | I-Port (LANx) iqhagamshelwe ngokufanelekileyo (LINK). |
| I-Blink | I-Port (LANx) ithumela okanye/yamkela idatha (ACT). | |
| Icinyiwe | Isithintelo soqhagamshelo lwePort (LANx) okanye aluqhagamshelwanga. | |
| I-FXS | On | Ifowuni ibhalisiwe kwi-SIP Server. |
| I-Blink | Ifowuni ine-registered kunye ne-data transmission (ACT). | |
| Icinyiwe | Ubhaliso lwefowuni aluchanekanga. |
Ulwazi loku-odola
| Igama lemveliso | Imodeli yeMveliso | Iinkcazo |
| IIPHOTHI ZE-WIFI ZE-1G3F XPON | I-ZX1014R127 | I-interface ye-Ethernet eyi-1*10/100/1000M kunye ne-3*10/100M, 1 Ujongano lwe-GPON, ujongano lwe-PORT olu-1, ixhasa umsebenzi we-Wi-Fi, Ibhokisi yeplastiki, iadaptha yombane yangaphandle |
Isicelo
Isisombululo Esiqhelekileyo：I-FTTO (iOfisi)、I-FTTB (Isakhiwo)、I-FTTH (Ikhaya).
TInkonzo eqhelekileyo：I-intanethi ye-Broadbandukufikelela, i-IPTV, i-VoIP njl.njl.
-
Uhlobo lwentsimbi lwe-OYI-OCC-G (24-288)
I-Fiber optic distribution terminal sisixhobo esisetyenziswa njengesixhobo soqhagamshelo kwinethiwekhi yokufikelela kwi-fiber optic yentambo ye-feeder kunye nentambo yokusasaza. Iintambo ze-Fiber optic zixhunywa ngokuthe ngqo okanye zipheliswe kwaye zilawulwa ziintambo ze-patch ukuze zisasazwe. Ngophuhliso lwe-FTTX, iikhabhathi zoqhagamshelo lwentambo yangaphandle ziya kusetyenziswa kakhulu kwaye zisondele kumsebenzisi wokugqibela. -
I-OYI-FOSC H12
Ukuvalwa kwe-OYI-FOSC-04H Horizontal fiber optic splice kuneendlela ezimbini zokudibanisa: ukunxibelelana ngqo kunye nokudibanisa okuqhekekileyo. Zisebenza kwiimeko ezifana ne-overhead, i-manhole yepayipi, kunye neemeko ezifakwe ngaphakathi, njl. Xa kuthelekiswa nebhokisi yesiphelo, ukuvalwa kufuna iimfuno ezingqongqo kakhulu zokuvala. Ukuvalwa kwe-Optical splice kusetyenziselwa ukusasaza, ukudibanisa, kunye nokugcina iintambo ze-optical zangaphandle ezingenayo neziphumayo kwiziphelo zokuvala. Ukuvalwa kuneendawo zokungena ezimbini kunye neendawo zokuphuma ezimbini. Iqokobhe lemveliso lenziwe ngezinto ze-ABS/PC+PP. Ezi ndawo zokuvala zibonelela ngokhuseleko oluhle kakhulu kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68. -
Iintambo zeNylon ezizitshixayo
Iintambo zeCable zeNtsimbi Engagqwaliyo: Amandla aphezulu, Ukuqina okungenakuthelekiswa, Phucula izisombululo zakho zokubopha kunye nokubopha ngeentambo zethu zeCable zeNtsimbi Engagqwaliyo zodidi oluphezulu. Zenzelwe ukusebenza kwiindawo ezifuna kakhulu, ezi ntambo zinika amandla angcono okutsalwa kunye nokumelana okungaqhelekanga nokugqwala, iikhemikhali, imisebe ye-UV, kunye nobushushu obugqithisileyo. Ngokungafaniyo neentambo zeplastiki eziqhekekayo kwaye zingasebenzi, iintambo zethu zeNtsimbi Engagqwaliyo zibonelela ngokubamba okuhlala kuhleli, okukhuselekileyo, nokuthembekileyo. Uyilo olukhethekileyo, oluzitshixayo luqinisekisa ukufakwa ngokukhawuleza nangokulula ngesenzo esigudileyo, esitshixayo esingayi kutyibilika okanye sikhululeke ngokuhamba kwexesha. -
Intambo yokufikelela kwiThubhu ePhakathi engeyiyo yesinyithi
Iifayibha kunye neeteyiphu ezithintela amanzi zibekwe kwityhubhu eyomileyo ekhululekileyo. Ityhubhu ekhululekileyo isongelwe ngomaleko weentambo ze-aramid njengelungu lokuqina. Iiplastiki ezimbini eziqinisiweyo zefayibha (FRP) ezihambelanayo zibekwe kumacala omabini, kwaye intambo igqityezelwe ngesheya yangaphandle ye-LSZH. -
Intambo yoQhagamshelo lweZipcord GJFJ8V
Intambo ye-ZCC Zipcord Interconnect isebenzisa i-900um okanye i-600um flame-retardant tight buffer fiber njengendlela yokunxibelelana ebonakalayo. I-tight buffer fiber isongelwe ngomaleko we-aramid yarn njengeeyunithi zamalungu okuqina, kwaye intambo izaliswe ngejakethi ye-PVC, OFNP, okanye i-LSZH (Low Smoke, Zero Halogen, Flame-retardant). -
Imodyuli ye-OYI-1L311xF
Ii-transceivers ze-OYI-1L311xF Small Form Factor Pluggable (SFP) ziyahambelana neSivumelwano se-Small Form Factor Pluggable Multi-Sourcing (MSA), i-transceiver inamacandelo amahlanu: umqhubi we-LD, i-amplifier ethintelayo, i-digital diagnostic monitor, i-FP laser kunye ne-PIN photo-detector, i-module data link ukuya kwi-10km kwi-9/125um single mode fiber. I-optical output ingacinywa yi-TTL logic high-level input ye-Tx Disable, kwaye inkqubo nayo i-02 ingacima i-module nge-I2C. I-Tx Fault ibonelelwa ukubonisa ukuba i-laser yonakele. I-Loss of signal (LOS) output ibonelelwa ukubonisa ukulahleka kwe-input optical signal ye-receiver okanye imeko ye-link ne-partner. Inkqubo inokufumana ulwazi lwe-LOS (okanye i-Link)/Disable/Fault ngokusebenzisa ukufikelela kwirejista ye-I2C.
Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.
