0755-23179541
sales@oyii.net.png)
8618926041961
I-Direct Bury (DB) 7-way 7/4mm
Inqwaba yeThubhu yeHDPE
I-Direct Bury (DB) 7-way 7/4mm
Iimpawu zeMveliso
Ubungakanani be-tube bundle bumele bube:
| 1) | Umbhobho Omncinane Wangaphakathi: | 7/4mm |
| 2) | Ububanzi obungaphandle: | 23.4mm * 21.6mm (± 0.5mm) |
| 3) | Ubukhulu besheathing: | 1.2mm |
(IsiNgesi)Umfanekiso 1）
Amagqabaza:I-Ripcord ayinyanzelekanga.
Iimpahla ezingekasilwa:
I-HDPE yohlobo olune-molekyuli ephezulu enezi parameter zilandelayo isetyenziselwa ukuvelisa i-Tube Bundle:
Isalathisi sokuhamba komoya onyibilikayo: 0.1～0.4 g/10 imizuzu EN ISO 1133
(190 °C, 2.16 KG)
Ubuninzi: Ubuncinane yi-0.940 g/cm3I-ISO 1183
Amandla okutsalwa xa ivunwa: Ubuncinci be-20MPa ISO 527
Ukwandiswa ngexesha lokuphumla: Ubuncinane be-350% ISO 527
Ukumelana noxinzelelo lwendalo esingqongileyo kunye neentanda (F)50) Ubuncinane beeyure ezingama-96 ze-ISO 4599
Ulwakhiwo
1.Isingxobo se-PE: Isingxobo sangaphandle senziwe ngombalaI-HDPE, ayinayo i-halogen. Umbala oqhelekileyo wesheath yangaphandle yiorenji. Omnye umbala unokwenzeka xa umthengi ecela.
2. Umjelo omncinci: Umjelo omncinci wenziwe nge-HDPE, ukhutshwe ngezinto ezisemgangathweni eziyi-100%. Umbala kufuneka ube luhlaza okwesibhakabhaka (umjelo ophakathi), obomvu, oluhlaza, otyheli, omhlophe, ongwevu, o-orenji okanye ezinye izinto ezenziwe ngokwezifiso.
Iiparameters zobugcisa
Itheyibhile 1: Ukusebenza koomatshini kwe-inner micro duct Φ7/4mm
| Iposi. | Ukusebenza koomatshini | Iimeko zovavanyo | Ukusebenza | Umgangatho |
| 1 | Amandla okuxinana xa ephuma | Izinga lolwandiso: 100mm/ngomzuzu | ≥500N | I-IEC 60794-1-2 Indlela E1 |
| 2 | Ukutyumza | Ubude besampulu: 250mm Umthwalo: 1700N Ubude bomthwalo ophezulu: imizuzu e-1 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E3 |
| 3 | Kink | ≤70mm | - | I-IEC 60794-1-2 Indlela E10 |
| 4 | Impembelelo | Irediyasi yomphezulu ochukumisayo: 10mm Amandla empembelelo: 1J Inani lempembelelo: amaxesha ama-3 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Xa kujongwa ngamehlo, akuyi kubakho monakalo kwi-micro duct. | I-IEC 60794-1-2 Indlela E4 |
| 5 | Irediyasi egobileyo | Inani leenguqu: 5 Ububanzi beMandrel: 84mm Inani lemijikelo: 3 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E11 |
| 6 | Ukungqubana | / | ≤0.1 | Umgca we-M |
Itheyibhile 2: Ukusebenza koomatshini kweTube Bundle
| Iposi. | Into | Inkcazo | |
| 1 | Inkangeleko | Udonga olungaphandle oluthambileyo (oluzinzileyo nge-UV) ngaphandle kokungcola okubonakalayo; umbala olinganisiweyo kakuhle, akukho maqamza okanye imifantu; kunye neempawu ezichaziweyo eludongeni olungaphandle. | |
| 2 | Tensile strength | Sebenzisa iisokisi zokutsala ukuze uqinise isampuli ngokwetheyibhile engasezantsi: Ubude besampulu: 1m Isantya sokutsalwa: 20mm/min Umthwalo: 2450N Ubude boxinzelelo: 5 min. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 3 | Ukumelana nokutyumza | Isampulu engama-250mm emva kwexesha lokulayisha umzuzu omnye kunye nexesha lokubuyisela iyure e-1. Umthwalo (ipleyiti) kufuneka ube yi-2000N. Ushicilelo lwepleyiti ekwisigqubuthelo aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 4 | Impembelelo | Irediyasi yomphezulu obethayo mayibe yi-10mm kwaye amandla ombane abe yi-5J. Ixesha lokubuyisela umva kufuneka libe linye. Ushicilelo lomphezulu obethayo kwi-microduct aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 5 | Goba | Ububanzi be-mandrel bube yi-40X OD yesampulu, iinguqu ezi-4, imijikelo emi-3. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
Ubushushu bokugcina
Iipakeji ezigqityiweyo ze-HDPE Tube Bundle kwiidrama zingagcinwa ngaphandle ubuninzi beenyanga ezi-6 ngomhla wokuveliswa.
Ubushushu bokugcina: -40°C～+70°C
Ubushushu bokufakelwa: -30°C～+50°C
Ubushushu bokusebenza: -40°C～+70°C
-
Uhlobo lweKlampu yokuSuswa kwe-ADSS A
Iyunithi yokumiswa kwe-ADSS yenziwe ngezinto zentsimbi yesinyithi eqinisiweyo kakhulu, ezinokumelana nokugqwala okuphezulu kwaye zinokwandisa ixesha lokusetyenziswa. Iziqwenga zerabha ezithambileyo ziphucula ukuzithambisa kwaye zinciphise ukurhawuzelelwa. -
I-bund ephakathi engeyiyo yesinyithi eqinisiweyo kabini ye-FRP ...
Ulwakhiwo lwentambo ye-optical ye-GYFXTBY luqulathe iintambo ezininzi (1-12 cores) ezinemibala engama-250μm (iintambo ze-optical ze-single-mode okanye ze-multimode) ezivalelwe kwityhubhu ekhululekileyo eyenziwe ngeplastiki ene-modulus ephezulu kwaye izaliswe yi-compound engangeni manzi. I-non-metallic tensile element (FRP) ibekwa kumacala omabini etyhubhu ye-bundle, kwaye intambo yokukrazula ibekwa kumaleko wangaphandle wetyhubhu ye-bundle. Emva koko, ityhubhu ekhululekileyo kunye nezinto ezimbini zokuqinisa ezingezizo zesinyithi zenza isakhiwo esikhutshwe nge-polyethylene ephezulu (PE) ukwenza intambo ye-arc runway optical. -
Intambo yoQhagamshelo lweZipcord GJFJ8V
Intambo ye-ZCC Zipcord Interconnect isebenzisa i-900um okanye i-600um flame-retardant tight buffer fiber njengendlela yokunxibelelana ebonakalayo. I-tight buffer fiber isongelwe ngomaleko we-aramid yarn njengeeyunithi zamalungu okuqina, kwaye intambo izaliswe ngejakethi ye-PVC, OFNP, okanye i-LSZH (Low Smoke, Zero Halogen, Flame-retardant). -
Uhlobo lwe-OYI-ODF-MPO-Series
Iphaneli ye-MPO patch ye-fiber optic efakelwe kwi-rack isetyenziselwa uqhagamshelo, ukhuseleko, kunye nolawulo lwe-cable terminal kwi-trunk cable kunye ne-fiber optic. Ithandwa kakhulu kwiindawo zedatha, kwi-MDA, kwi-HAD, nakwi-EDA yoqhagamshelo kunye nolawulo lwe-cable. Ifakwe kwi-rack kunye nekhabhathi eyi-19-intshi ene-MPO module okanye iphaneli ye-adapter ye-MPO. Ineentlobo ezimbini: uhlobo olufakelwe kwi-rack oluzinzileyo kunye nohlobo lwe-drawer structure sliding rail. Ingasetyenziswa kakhulu kwiinkqubo zonxibelelwano lwe-optical fiber, iinkqubo zethelevishini yekhebula, ii-LAN, ii-WAN, kunye ne-FTTX. Yenziwe ngentsimbi eqengqelekayo ebandayo ene-Electrostatic spray, enika amandla okuncamathelisa aqinileyo, uyilo lobugcisa, kunye nokuqina. -
I-OYI-FOSC-D108M
Ukuvalwa kwe-OYI-FOSC-M8 dome fiber optic splice kusetyenziswa kwizicelo zomoya, zokufakelwa eludongeni, kunye nezomhlaba phantsi komhlaba kwi-splice ethe tye neyamasebe yentambo yefayibha. Ukuvalwa kwe-dome splicing lukhuselo oluhle kakhulu kwi-fiber optic joints kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungenako ukuvuza kunye nokukhuselwa kwe-IP68. -
I-Splitter yohlobo lweFayibha engenanto
I-fiber optic PLC splitter, eyaziwa ngokuba yi-beam splitter, sisixhobo sokusasaza amandla e-optical esidityanisiweyo esisekelwe kwi-quartz substrate. Ifana nenkqubo yokudlulisa intambo ye-coaxial. Inkqubo yenethiwekhi ye-optical ikwafuna isignali ye-optical ukuba idityaniswe nokusasazwa kwesebe. I-fiber optic splitter yenye yezona zixhobo zibalulekileyo ze-passive kwikhonkco le-optical fiber. Sisixhobo se-optical fiber tandem esinee-terminals ezininzi zokufaka kunye nee-terminals ezininzi zokukhupha, kwaye sisebenza ngakumbi kwinethiwekhi ye-passive optical (EPON, GPON, BPON, FTTX, FTTH, njl.njl.) ukudibanisa i-ODF kunye nezixhobo ze-terminal kunye nokufezekisa ukuhlanganiswa kwesignali ye-optical.
Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.
