0755-23179541
sales@oyii.net.png)
8618926041961
I-Direct Bury (DB) 7-way 7/3.5mm
Inqwaba yeThubhu yeHDPE
I-Direct Bury (DB) 7-way 7/3.5mm
Ingcaciso yeMveliso
(Umfanekiso 1)
| 1) | Umbhobho omncinci wangaphakathi: | 7/3.5mm |
| 2) | Ububanzi obungaphandle: | 23.4mm * 21.6mm (±0.5mm) |
| 3) | Ubukhulu besheathing: | 1.2mm (±0.2mm) |
Amagqabaza:I-Ripcord ayinyanzelekanga.
Iimpahla ezingekasilwa:
I-HDPE yohlobo olune-molekyuli ephezulu enezi parameter zilandelayo isetyenziselwa ukuvelisa i-Tube Bundle:
Isalathisi sokuhamba komoya onyibilikayo: 0.1～0.4 g/10 imizuzu NISO 1133
(190 °C, 2.16 KG)
Ubuninzi: Ubuncinane 0.940 g/cm3I-ISO 1183
Amandla okutsalwa xa ivunwa: Ubuncinane be-20MPa Ubuncinci be-ISO 527
Ukwandiswa ngexesha lokuphumla: Ubuncinane be-350% ISO 527
Ukumelana noxinzelelo lwendalo esingqongileyo kunye nokuqhekeka (F50) Ubuncinane beeyure ezingama-96 ISO 4599
Ulwakhiwo
1. Isingxobo se-PE: Isingxobo sangaphandle senziwe nge-HDPE enemibala, ayinayo i-halogen. Umbala oqhelekileyo wesingxobo sangaphandle ungoorenji. Omnye umbala unokwenzeka xa umthengi ecela.
2. Umjelo omncinci: Umjelo omncinci wenziwe nge-HDPE, ukhutshwe ngezinto ezisemgangathweni eziyi-100%. Umbala kufuneka ube luhlaza okwesibhakabhaka (umjelo ophakathi), obomvu, oluhlaza, otyheli, omhlophe, ongwevu, o-orenji okanye ezinye izinto ezenziwe ngokwezifiso.
Iinkcukacha zobugcisa
Itheyibhile 1: Ukusebenza koomatshini kwe-inner micro duct Φ7/3.5mm
| Iposi. | Ukusebenza koomatshini | Iimeko zovavanyo | Ukusebenza | Umgangatho |
| 1 | Amandla okuxinana xa ephuma | Izinga lolwandiso: 100mm/ngomzuzu | ≥520N | I-IEC 60794-1-2 Indlela E1 |
| 2 | Ukutyumza | Ubude besampulu: 250mm Umthwalo: 2450N Ubude bomthwalo ophezulu: imizuzu e-1 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E3 |
| 3 | Kink | ≤70mm | - | I-IEC 60794-1-2 Indlela E10 |
| 4 | Impembelelo | Irediyasi yomphezulu ochukumisayo: 10mm Amandla empembelelo: 1J Inani lempembelelo: amaxesha ama-3 Ixesha lokubuyisela kwimeko yesiqhelo: iyure e-1 | Xa kujongwa ngamehlo, akuyi kubakho monakalo kwi-micro duct. | I-IEC 60794-1-2 Indlela E4 |
| 5 | Irediyasi egobileyo | Inani leenguqu: 5 Ububanzi beMandrel: 84mm Ninani lemijikelo: 3 | Ububanzi obungaphandle nobangaphakathi bufanele bubonakale, phantsi kovavanyo olubonakalayo ngaphandle komonakalo kwaye kungabikho kuncitshiswa kobubanzi obungaphezulu kwe-15%. | I-IEC 60794-1-2 Indlela E11 |
| 6 | Ukungqubana | / | ≤0.1 | Umgca we-M |
Itheyibhile 2: Ukusebenza koomatshini kweTube Bundle
| Iposi. | Into | Inkcazo | |
| 1 | Inkangeleko | Udonga olungaphandle oluthambileyo (oluzinzileyo nge-UV) ngaphandle kokungcola okubonakalayo; umbala olinganisiweyo kakuhle, akukho maqamza okanye imifantu; kunye neempawu ezichaziweyo eludongeni olungaphandle. | |
| 2 | Tensile strength | Sebenzisa iisokisi zokudonsa ukuze uqinise isampuli ngokwetheyibhile engezantsi: Ubude besampulu: 1m Isantya sokutsalwa: 20mm/min Umthwalo: 2750N Ubude boxinzelelo: 5 min. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 3 | Ukumelana nokutyumza | Isampulu engama-250mm emva kwexesha lokulayisha umzuzu omnye kunye nexesha lokubuyisela iyure e-1. Umthwalo (ipleyiti) kufuneka ube yi-2500N. Ushicilelo lwepleyiti ekwisigqubuthelo aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| Iposi. | Into | Inkcazo |
|
| 4 | Impembelelo | Irediyasi yomphezulu obethayo mayibe yi-10mm kwaye amandla okubetha abe yi-10J. Ixesha lokubuyisela kufuneka libe linye. Ushicilelo lomphezulu obethayo kwi-micro duct aluthathwa njengomonakalo woomatshini. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
| 5 | Goba | Ububanzi be-mandrel bube yi-40X OD yesampulu, iinguqu ezi-4, imijikelo emi-3. | Akukho monakalo wokubona okanye ukuguquka okushiyekileyo okungaphezulu kwe-15% yobubanzi bangaphandle be-duct assembly. |
Ubushushu bokugcina
Iipakeji ezigqityiweyo ze-HDPE Tube Bundle kwiidrama zingagcinwa ngaphandle ubuninzi beenyanga ezi-6 ngomhla wokuveliswa.
Ubushushu bokugcina: -40°C～+70°C
Ubushushu bokufakelwa: -30°C～+50°C
Ubushushu bokusebenza: -40°C～+70°C
-
I-OYI-FOSC H10
Ukuvalwa kwe-OYI-FOSC-03H Horizontal fiber optic splice kuneendlela ezimbini zokudibanisa: ukunxibelelana ngqo kunye nokudibanisa okuqhekekileyo. Zisebenza kwiimeko ezifana ne-overhead, i-man-well yepayipi, kunye neemeko ezifakwe ngaphakathi, njl. Xa kuthelekiswa nebhokisi yesiphelo, ukuvalwa kufuna iimfuno ezingqongqo kakhulu zokuvala. Ukuvalwa kwe-Optical splice kusetyenziselwa ukusasaza, ukudibanisa, kunye nokugcina iintambo ze-optical zangaphandle ezingenayo neziphumayo kwiziphelo zokuvala. Ukuvalwa kuneendawo zokungena ezimbini kunye neendawo zokuphuma ezimbini. Iqokobhe lemveliso lenziwe ngezinto ze-ABS+PP. Ezi ndawo zokuvala zibonelela ngokhuseleko oluhle kakhulu kwiindawo zangaphandle ezifana ne-UV, amanzi, kunye nemozulu, kunye nokuvalwa okungena kuvuza kunye nokukhuselwa kwe-IP68. -
Intambo yeDuplex Patch
Intambo ye-OYI fiber optic duplex patch cord, eyaziwa ngokuba yi-fiber optic jumper, yenziwe ngentambo ye-fiber optic ephelisweyo enezihlanganisi ezahlukeneyo kwicala ngalinye. Iintambo ze-Fiber optic patch zisetyenziswa kwiindawo ezimbini eziphambili zokusetyenziswa: ukudibanisa iindawo zokusebenza zekhompyutha kwiindawo zokuphuma kunye neepaneli ze-patch okanye iziko lokusasaza i-optical cross-connect. I-OYI ibonelela ngeentlobo ezahlukeneyo zeentambo ze-fiber optic patch, kubandakanya iintambo ze-single-mode, i-multi-mode, i-multi-core, i-armored patch cables, kunye neentambo ze-fiber optic pigtails kunye nezinye iintambo ze-patch ezikhethekileyo. Kwiintambo ze-patch ezininzi, izihlanganisi ezifana ne-SC, ST, FC, LC, MU, MTRJ, DIN kunye ne-E2000 (i-APC/UPC polish) ziyafumaneka. Ukongeza, sikwabonelela ngeentambo ze-MTP/MPO patch. -
Uhlobo lwe-OYI-ODF-PLC-Series
I-PLC splitter sisixhobo sokusasaza amandla e-optical esisekelwe kwi-waveguide edibeneyo ye-quartz plate. Ineempawu zobukhulu obuncinci, uluhlu olubanzi lwe-wavelength olusebenzayo, ukuthembeka okuzinzileyo, kunye nokufana okuhle. Isetyenziswa kakhulu kwiindawo ze-PON, ODN, kunye ne-FTTX ukudibanisa phakathi kwezixhobo zesiphelo kunye ne-ofisi ephakathi ukuze kufezekiswe ukwahlukana kwesignali. Uhlobo lwe-OYI-ODF-PLC series 19′ rack mount lune-1×2, 1×4, 1×8, 1×16, 1×32, 1×64, 2×2, 2×4, 2×8, 2×16, 2×32, kunye ne-2×64, ezenzelwe usetyenziso kunye neemarike ezahlukeneyo. Inobukhulu obuncinci obune-bandwidth ebanzi. Zonke iimveliso zihlangabezana ne-ROHS, GR-1209-CORE-2001, kunye ne-GR-1221-CORE-1999. -
I-OYI 321GER
Imveliso ye-ONU sisixhobo sesiphelo soluhlu lwe-XPON oluhambelana ngokupheleleyo nomgangatho we-ITU-G.984.1/2/3/4 kwaye luhlangabezana nokonga amandla kweprotocol ye-G.987.3, i-ONU isekelwe kubuchwepheshe be-GPON obuvuthiweyo nobuzinzileyo nobunexabiso eliphezulu obusebenzisa i-chipset ye-XPON Realtek esebenza kakhulu kwaye inokuthembeka okuphezulu, ulawulo olulula, uqwalaselo oluguquguqukayo, ukuqina, isiqinisekiso senkonzo esemgangathweni (Qos). I-ONU isebenzisa i-RTL yesicelo se-WIFI esixhasa umgangatho we-IEEE802.11b/g/n ngaxeshanye, inkqubo ye-WEB enikiweyo yenza kube lula ukucwangciswa kwe-ONU kwaye iqhagamshela kwi-INTERNET ngokulula kubasebenzisi. I-XPON inomsebenzi wokuguqula i-G / E PON, oqatshelwa yisoftware ecocekileyo. -
Isibiyeli sePole ye-UPB Aluminium Alloy Universal Pole
Isibiyeli sepali esiqhelekileyo sisixhobo esisebenzayo esidlala indima ebalulekileyo kumashishini ahlukeneyo. Senziwe kakhulu nge-aluminium alloy, esinika amandla aphezulu oomatshini, okwenza ukuba sibe semgangathweni ophezulu kwaye sihlale ixesha elide. Uyilo lwayo olukhethekileyo olunelungelo lomenzi luvumela ukufakwa kwezixhobo eziqhelekileyo ezinokugubungela zonke iimeko zokufakelwa, nokuba zikwiipali zomthi, zesinyithi, okanye zekhonkrithi. Sisetyenziswa ngeebhendi zentsimbi engagqwaliyo kunye namabhonkco ukulungisa izixhobo zekhebula ngexesha lokufakwa. -
I-FTTH Drop Cable Suspension Tension Clamp S Hook
I-FTTH fiber optic drop cable suspension tension clamp Ii-hook clamps ze-S zikwabizwa ngokuba zii-insulated plastic drop wire clamps. Uyilo lwe-dead-ending kunye ne-suspension thermoplastic drop clamp luquka imo yomzimba evaliweyo kunye ne-wedge ethe tyaba. Iqhagamshelwe emzimbeni ngekhonkco eliguquguqukayo, ukuqinisekisa ukuba ibanjwa kunye nebheyile yokuvula. Luhlobo lwe-drop cable clamp esetyenziswa kakhulu kuzo zombini ii-indoor and outdoor facilities. Ibonelelwa nge-shim eneentsimbi ukuze inyuse ukubamba kwi-drop wire kwaye isetyenziselwa ukuxhasa i-one and two telephone drop wires kwi-span clamps, ii-drive hooks, kunye nee-attachments ezahlukeneyo ze-drop. Inzuzo ebalaseleyo ye-insulated drop wire clamp kukuba inokuthintela ukunyuka kombane ekufikeleleni kwindawo yabathengi. Umthwalo osebenzayo kwi-support wire uncitshiswa ngempumelelo yi-insulated drop wire clamp. Ibonakaliswa kukusebenza okuhle okuxhathisa ukugqwala, iipropati ezilungileyo zokukhusela, kunye nenkonzo ende.
Ukuba ufuna isisombululo sentambo ye-fiber optic ethembekileyo nekhawulezayo, khangela i-OYI. Nxibelelana nathi ngoku ukuze ubone indlela esinokukunceda ngayo uhlale uqhagamshelene kwaye unyuse ishishini lakho liye kwinqanaba elilandelayo.
