0755-23179541
sales@oyii.net
Tanu Tika (DB) 7-ara 16/12mm
Pūhui Ngongo HDPE
Tanu Tika (DB) 7-ara 16/12mm
Whakaahuatanga Hua
(Pikitia 1)
| 1) | Paipa moroiti o roto: | 16/12mm |
| 2) | Diameter o Waho: | 50.4mm * 46.1mm (±1.1mm) |
| 3) | Te matotoru o te hipoki: | 1.2mm |
Ngā Kōrero:He kōwhiringa a Ripcord.
Ngā rauemi mata:
Ko te HDPE o te momo ngota-teitei me ngā tawhā e whai ake nei e whakamahia ana mō te hanga i te Paihere Ngongo:
Taupū rere rewa: 0.1~0.4 karamu/10 meneti NISO 1133
(190 °C, 2.16 KG)
Kiato: Iti rawa 0.940 karamu/cm3 ISO 1183
Kaha kume i te hua: Minimum. 20MPa ISO 527
Te roa i te whati: Minimum 350% ISO 527
Ātete ki te pakaru o te taiao (F50) 96 hāora iti rawa ISO 4599
Hanganga
1. Puranga PE: He mea hanga te puranga o waho mai i te HDPE tae, kāore he halogen. Ko te tae noa o te puranga o waho he karaka. Tērā pea he tae kē atu e taea ana mēnā ka tonoa mai e te kiritaki.
2. Paipa iti: He mea hanga te paipa iti mai i te HDPE, he mea whakaputa mai i te rauemi hou 100%. Me hina (paipa pokapū), whero, kakariki, kikorangi, kōwhai, karaka, tipu, me ētahi atu tae kua whakaritea.
Ngā Whakatakotoranga Hangarau
Ripanga 1: Mahi ā-pūkaha o te paipa moroiti o roto Φ16/12mm
| Tūnga. | Te mahi ā-mīhini | Ngā tikanga whakamātautau | Mahi | Paerewa |
| 1 | Te kaha kume i te hua | Te tere o te toronga: 100mm/min | ≥1600N | IEC 60794-1-2 Tikanga E1 |
| 2 | Kuru | Roa tauira: 250mm Utaina: 1200N Te roanga o te kawenga mōrahi: 1 meneti Te wā whakaora: 1 hāora | Me whakaatu te whānui o waho, o roto hoki, i raro i te tirotiro ā-kanohi, kāore he pakaru, ā, kāore hoki he whakahekenga o te whānui neke atu i te 15%. | IEC 60794-1-2 Tikanga E3 |
| 3 | Kino | ≤160mm | - | IEC 60794-1-2 Tikanga E10 |
| 4 | Pānga | Te whānui o te mata e pā ana: 10mm Pūngao Pānga: 1J Te maha o ngā pānga: 3 ngā wā Te wā whakaora: 1 hāora | I raro i te tirotiro ā-kanohi, kāore he kino ki te paipa moroiti. | IEC 60794-1-2 Tikanga E4 |
| 5 | Pūtoro piko | Te maha o ngā takahuri: 5 Te whānui o te mandrel: 192mm Tau o ngā huringa: 3 | Me whakaatu te whānui o waho, o roto hoki, i raro i te tirotiro ā-kanohi, kāore he pakaru, ā, kāore hoki he whakahekenga o te whānui neke atu i te 15%. | IEC 60794-1-2 Tikanga E11 |
| 6 | Te waku | / | ≤0.1 | Raina-M |
Ripanga 2: Te mahi ā-pūkaha o te Paihere Ngongo
| Tūnga. | Taonga | Whakatakotoranga | |
| 1 | Āhua | He pakitara o waho maeneene (kua taurite ki te hihi UV) kāore he poke e kitea ana; he pai te taurite o te tae, kāore he mirumiru, kāore hoki he kapiti; me ngā tohu kua tautuhia i te pakitara o waho. | |
| 2 | Te kaha o te kume | Whakamahia ngā tōkena Tōia hei whakatō i tētahi tauira kia rite ki te ripanga i raro nei: Te roa o te tauira: 1m Tere kume: 20mm/min Utaina: 7500N Te roa o te taumahatanga: 5 meneti. | Kāore he kino tirohanga, he rerekētanga toenga rānei e neke atu i te 15% o te diameter o waho o te huihuinga paipa. |
| 3 | Ātete ki te kuru | He tauira 250mm i muri i te 1 meneti te roa o te uta me te 1 hāora te roa o te whakaora. Me 2000N te uta (pereti). Kāore te tohu o te pereti ki runga i te takotoranga e kiia he kino ā-ringa. | Kāore he kino tirohanga, he rerekētanga toenga rānei e neke atu i te 15% o te diameter o waho o te huihuinga paipa. |
| Tūnga. | Taonga | Whakatakotoranga |
|
| 4 | Pānga | Ko te whānui o te mata patu me 10mm, ā, ko te kaha pānga me 10J. Ko te wā whakaora me kotahi te putanga. Ko te tohu o te mata patu ki runga i ngā awa itiiskāore e kiia he kino ā-mīhini. | Kāore he kino tirohanga, he rerekētanga toenga rānei e neke atu i te 15% o te diameter o waho o te huihuinga paipa. |
| 5 | Piko | Ko te whānui o te mandrel me 40X te OD o te tauira, 4 hurihanga, 3 huringa. | Kāore he kino tirohanga, he rerekētanga toenga rānei e neke atu i te 15% o te diameter o waho o te huihuinga paipa. |
|
|
| ||
Te pāmahana rokiroki
Ka taea te penapena i ngā kete o te Putunga Ngongo HDPE kua oti i runga i ngā pahu ki waho mō te 6 marama te roa mai i te rā i hangaia ai.
Pāmahana rokiroki: -40°C~+70°C
Te pāmahana tāutanga: -30°C~+50°C
Pāmahana whakahaere: -40°C~+70°C
-
OYI HD-08
Ko te OYI HD-08 he pouaka MPO kirihou ABS+PC kei roto he pouaka rīpene me te uhi. Ka taea te uta i te 1pc MTP/MPO adapter me te 3pcs LC quad (SC duplex rānei) adapters me te kore he flange. He topenga whakatika e pai ana mō te tāuta ki roto i te muka whatu reti rite.papa tākaiHe kakau whakahaere momo pana kei ngā taha e rua o te pouaka MPO. He ngāwari te tāuta me te wetewete.
-
Pene Horoi Muka Whatu Momo 2.5mm
He māmā noa te whakamahi i te pene horoi muka whatu pāwhiri-kotahi, ā, ka taea te whakamahi hei horoi i ngā hononga me ngā kara 2.5mm e kitea ana i roto i te urutau taura muka whatu. Whakauruhia noa te kaihoroi ki roto i te urutau ka pēhi kia rongo ra ano koe i te "pāwhiri". Ka whakamahia e te kaihoroi pēhi he mahi pēhi ā-ringa hei pēhi i te rīpene horoi kounga-whatu i a koe e hurihuri ana i te pane horoi kia tino whai hua te mata pito muka engari kia mārie te horoi..
-
Te Pupuri a te Tangata Mutunga Kore
He whānuitia te whakamahinga o te pito-mate kua oti te hanga mō te tāutanga o ngā ara iahiko tahanga, ngā ara iahiko whakamātao rānei mō ngā raina tuku me te tohatoha. He pai ake te pono me te mahi ōhanga o te hua i te momo pūtu me te momo waipēhi e whakamahia whānuitia ana i roto i te ara iahiko. He ātaahua te āhua o tēnei pito-mate ahurei, kotahi te wahi, ā, kāore he pūtu, he taputapu pupuri taumaha-teitei rānei. Ka taea te hanga ki te maitai piauau, ki te maitai konumohe rānei.
-
OYI 321GER
Ko te hua ONU te taputapu whakamutunga o te raupapa oXPONe tutuki katoa ana i te paerewa ITU-G.984.1/2/3/4 me te tutuki i te kawa penapena-pūngao o G.987.3, e hangai ana a onu ki te pakeke me te pumau me te utu-whai hua nuiGPONHe hangarau e whakamahi ana i te maramara XPON Realtek mahi-teitei, ā, he tino pono, he ngāwari te whakahaere, he ngāwari te whirihoranga, he pakari, he kounga pai te taurangi ratonga (Qos).
Ka whakamahia e ONU te RTL mō te tono WIFI e tautoko ana i te paerewa IEEE802.11b/g/n i te wā kotahi, ka māmā ake te whirihoranga o te pūnaha WEB e whakaratohia ana.ONU ā, ka hono atu ki te INTERNET mā te hunga whakamahi. Kei a XPON te mahi tahuritanga tahi G / E PON, e whakatinanahia ana e te pūmanawa parakore.
-
Waea Whenua Whatu OPGW
Ko te OPGW taura paparanga he kotahi, neke atu rānei ngā waeine maitai kore-whatu muka me ngā waea maitai whakakikoruatia ki te konumohe, me te hangarau taura hei whakatika i te taura, he maha atu i te rua ngā paparanga waea maitai whakakikoruatia ki te konumohe, ā, ka taea e ngā āhuatanga o te hua te whakauru i ngā ngongo waeine muka-whatu maha, he nui te kaha o te matua muka. I te wa ano, he nui te diameter o te taura, ā, he pai ake ngā āhuatanga hiko me te miihini. He mama te hua, he iti te diameter o te taura, ā, he ngāwari te tāuta.
-
Taura muka whatu tautoko-ā-unoa Pikitia 8
Kei roto i tētahi ngongo wetewete ngā muka 250um i hangaia ki te kirihou modulus teitei. Kua whakakīia ngā ngongo ki tētahi matū whakakī ātete-wai. Kei waenganui o te matua he waea rino hei mema kaha whakarewa. Ka herea ngā ngongo (me ngā muka) ki te mema kaha hei matua taura kiato, porowhita hoki. I muri i te paninga o tētahi ārai makuku konumohe (rīpene rino rānei) Polyethylene Laminate (APL) ki te matua taura, ka oti tēnei wāhanga o te taura, me ngā waea here hei wāhanga tautoko, ki tētahi uhi polyethylene (PE) hei hanga i tētahi hanganga ahua 8. Kei te wātea hoki ngā taura ahua 8, GYTC8A me GYTC8S, ina tonoa. He mea hanga motuhake tēnei momo taura mō te tāutanga ā-rangi tautoko-whaiaro.
Mena kei te rapu koe i tētahi otinga taura muka whatu pono, tere-teitei, tirohia a OYI. Whakapā mai inaianei kia kite ai koe me pēhea mātou e āwhina ai i a koe kia hono tonu, kia eke ai hoki tō pakihi ki te taumata e whai ake nei.
