PPB-5496-80B ke plugable e chesang ea 3.3V Small-Form-Factor transceiver module. E etselitsoe ka ho hlaka bakeng sa lits'ebetso tsa puisano tsa lebelo le holimo tse hlokang litefiso ho fihla ho 11.1Gbps, e etselitsoe ho lumellana le SFF-8472 le SFP+ MSA. Lintlha tsa mojule li hokahana ho fihla ho 80km ho 9/125um fiber mode e le 'ngoe.
1. Ho fihlela ho 11.1Gbps Data Links.
2. Ho fihla ho 80km phetiso ho SMF.
3. Ho senya matla <1.5W.
4. 1490nm DFB laser le APD receiver bakeng sa FYPPB-4596-80B.
1550nm DFB laser le APD e amohelang FYPPB-5496-80B
5. Khokahano ea terata ea 6.2 e nang le tlhahlobo e kopaneng ea Digital Diagnostic.
6. EEPROM e nang le Ts'ebetso ea Serial ID.
7. Hot-pluggableSFP+ mohato oa maoto.
8. E lumellana le SFP+ MSA leLC sehokelo.
9. E le 'ngoe + 3.3V Phepelo ea Matla.
10. Mocheso o sebetsang oa nyeoe: 0ºC ~+70ºC.
1.10GBASE-BX.
2.10GBASE-LR/LW.
1.E lumellana le SFF-8472.
2.Ho lumellana le SFF-8431.
3.E lumellana le 802.3ae 10GBASE-LR/LW.
4.RoHS e lumellana.
Pin | Letšoao | Lebitso/Tlhaloso | HLOKOMELA |
1 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1 |
2 | TLHOKOMELISO | Phoso ea Transmitter. | 2 |
3 | TDIS | Transmitter Disable. Laser e koetsoe ka holimo kapa e butsoe. | 3 |
4 | MOD_DEF (2) | Tlhaloso ea Mojule 2. Mohala oa data bakeng sa ID ea Serial. | 4 |
5 | MOD_DEF (1) | Tlhaloso ea Mojule 1. Mohala oa oache oa Serial ID. | 4 |
6 | MOD_DEF (0) | Tlhaloso ea Mojule 0. E thehiloe ka har'a mojule. | 4 |
7 | Rate Khetha | Ha ho khokahano e hlokahalang | 5 |
8 | TLHOKOMELO | Tahlehelo ya Pontsho ya Letshwao. Logic 0 e bontša ts'ebetso e tloaelehileng. | 6 |
9 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
10 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
11 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
12 | RD- | Receiver e Inverted DATA kantle. AC e kopantsoe |
|
13 | RD+ | Receiver DATA e sa kengoang e tsoile. AC e kopantsoe |
|
14 | VEER | Sebaka sa Receiver (Se Tloaelehileng le Sebaka sa Transmitter) | 1 |
15 | VCCR | Phepelo ea Matla a Receiver |
|
16 | VCCT | Phepelo ea Matla a Transmitter |
|
17 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1 |
18 | TD+ | Transmitter Non-Inverted DATA in. AC Couped. |
|
19 | TD- | Transmitter Inverted DATA in. AC Couped. |
|
20 | VEET | Transmitter Ground (E Tloaelehileng le Sebaka sa Receiver) | 1 |
Lintlha:
1. Sebaka sa potoloho se arotsoe ka hare ho sebaka sa chassis.
2.TFAULT ke mokelli o bulehileng / tlhahiso ea ho ntša metsi, e lokelang ho huloa ka 4.7k - 10k Ohms resistor holim'a boto ea baeti haeba e reretsoe ho sebelisoa. Pull up voltage e lokela ho ba pakeng tsa 2.0V ho Vcc + 0.3VA high output e bonts'a phoso ea transmitter e bakoang ke TX bias current kapa matla a tlhahiso ea TX a fetang menyako ea alamo e behiloeng esale pele. Phaello e tlase e bonts'a ts'ebetso e tloaelehileng. Boemong bo tlase, tlhahiso e huleloa ho <0.8V.
3.Sehlahisoa sa Laser se koaletsoe ho TDIS >2.0V kapa se butsoe, se lumelletsoe ho TDIS <0.8V.
4.E lokela ho huloa ka 4.7kΩ- 10kΩ boto ea moeti ho ea ho motlakase pakeng tsa 2.0V le 3.6V. MOD_ABS e hula mola tlase ho bontša hore mojule o kentsoe.
5.Ka hare e hutse ka SFF-8431 Rev 4.1.
6.LOS ke tlhahiso ea mokelli e bulehileng. E lokela ho huleloa ka 4.7kΩ - 10kΩ ho boto ea baeti ho ea ho motlakase o pakeng tsa 2.0V le 3.6V. Logic 0 e bontša ts'ebetso e tloaelehileng; logic 1 e bontša tahlehelo ea lets'oao.
Absolute Maximum Ratings
Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti | Hlokomela |
Mocheso oa polokelo | Ts | -40 |
| 85 | ºC |
|
Mongobo o Batlang | RH | 5 |
| 95 | % |
|
Matla a Phepelo ea Matla | VCC | -0.3 |
| 4 | V |
|
Letšoao la ho Kena ha Voltage |
| Vcc-0.3 |
| Vcc+0.3 | V |
Maemo a Tšebetso a khothalelitsoeng
Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti | Hlokomela |
Mocheso oa ho sebetsa ha Case | Tcase | 0 |
| 70 | ºC | Ntle le phallo ea moea |
Matla a Phepelo ea Matla | VCC | 3.13 | 3.3 | 3.47 | V |
|
Phepelo ea Matla Hona Joale | ICC |
|
| 520 | mA |
|
Sekhahla sa Lintlha |
|
| 10.3125 |
| Gbps | TX Rate / RX Rate |
Sebaka sa phetiso |
|
|
| 80 | KM |
|
Fiber e kopantsoeng |
|
| Fiber ea mofuta o le mong |
| 9/125um SMF |
Litšobotsi tsa Optical
Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti | Hlokomela |
| Phetiso |
|
|
| ||
Karolelano ea Matla a Qalisoa | Pout | 0 | - | 5 | dBm |
|
Kakaretso ea Matla a Qalisoang (Laser Off) | Poff | - | - | -30 | dBm | Tlhokomeliso (1) |
Setsi sa Wavelength Range | λC | 1540 | 1550 | 1560 | nm | FYPPB-5496-80B |
Side mode suppression ratio | SMSR | 30 | - | - | dB |
|
Spectrum Bandwidth(-20dB) | σ | - | - | 1 | nm |
|
Karolelano ea Phello | ER | 3.5 |
| - | dB | Tlhokomeliso (2) |
Mask ea Mahlo a Output | E lumellana le IEEE 802.3ae |
|
| Tlhokomeliso (2) | ||
| Moamoheli |
|
|
| ||
Kenya Optical Wavelength | λIN | 1480 | 1490 | 1500 | nm | FYPPB-5496-80B |
Boikutlo ba ho amohela | Psen | - | - | -23 | dBm | Tlhokomeliso (3) |
Matla a Kenyeletso (Saturation Power) | PSAT | -8 | - | - | dBm | Tlhokomeliso (3) |
LOS -Assert Matla | PA | -38 | - | - | dBm |
|
LOS -Dessert Matla | PD | - | - | -24 | dBm |
|
LOS - Hysteresis | PHys | 0.5 | - | 5 | dB |
Hlokomela:
1.Matla a optical a hlahisoa ho SMF
2.E lekantsoe le RPBS 2^31-1 mohlala oa teko @10.3125Gbs
3.E lekantsoe le RPBS 2^31-1 mohlala oa teko @10.3125Gbs BER=<10^-12
Litšobotsi tsa Interface ea Motlakase
Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti | Hlokomela |
Kakaretso ea motlakase oa hona joale | Icc | - |
| 520 | mA |
|
Phetiso | ||||||
Differential Data Input Voltage | VDT | 180 | - | 700 | mVp-p |
|
Phapang line input Impedance | RIN | 85 | 100 | 115 | Ohm |
|
Sephetho sa Phoso ea Transmitter-Holimo | VFaultH | 2.4 | - | Vcc | V |
|
Sephetho sa Phoso ea Transmitter-Botlase | VFaultL | -0.3 | - | 0.8 | V |
|
Transmitter Disable Voltage- Holimo | VDisH | 2 | - | Vcc+0.3 | V |
|
Transmitter Disable Voltage- tlase | VDisL | -0.3 | - | 0.8 | V |
|
Moamoheli | ||||||
Differential Data Output Voltage | VDR | 300 | - | 850 | mVp-p |
|
Phapang line Output Impedance | TSELA | 80 | 100 | 120 | Ohm |
|
Receiver LOS Hula Resistor | RLOS | 4.7 | - | 10 | KOhm | |
Nako ea ho Phahamisa / Ho oa ha data | tr/tf |
| - | 38 | ps |
|
LOS Output Voltage-High | VLOSHA | 2 | - | Vcc | V |
|
LOS Output Voltage-Low | VLOSL | -0.3 | - | 0.4 | V |
Digital Diagnostic Mesebetsi
PPB-5496-80Bli-transceiverstšehetsa 2-wire serial communication protocol joalokaha ho hlalositsoe ho SFP+MSA.
SFP serial ID e tloaelehileng e fana ka monyetla oa ho fumana lintlha tsa boitsebahatso tse hlalosang bokhoni ba transceiver, li-interfaces tse tloaelehileng, moetsi le lintlha tse ling.
Ho phaella moo, li-transceivers tsa SFP + tsa OYI li fana ka mokhoa o ikhethang o ntlafetseng oa ho hlahloba tlhahlobo ea dijithale, o lumellang ho fihlella nako ea sebele ho lisebelisoa tse sebetsang tsa lisebelisoa tse kang mocheso oa transceiver, laser bias current, matla a optical a fetisitsoeng, a fumane matla a optical le transceiver supply voltage. E boetse e hlalosa mokhoa o rarahaneng oa lifolakha tsa alamo le litemoso, tse lemosang basebelisi ha maemo a itseng a ts'ebetso a le ka ntle ho sebaka se tloaelehileng sa feme.
SFP MSA e hlalosa 'mapa oa memori ea 256-byte ho EEPROM e fumanehang ho feta 2-wire serial interface ho 8 bit address 1010000X (A0h) .The digital diagnostic monitoring interface e sebelisa aterese ea 8 bit 1010001X (A2h), kahoo 'mapa oa memori o hlalositsoeng qalong o ntse o sa fetohe.
Tlhahisoleseding ea ts'ebetso le tlhahlobo ea tlhahlobo e hlahlojoa le ho tlalehoa ke Digital Diagnostics Transceiver Controller (DDTC) ka hare ho transceiver, e fumanoang ka 2-wire serial interface. Ha protocol ea serial e sebetsa, lets'oao la oache ea serial (SCL, Mod Def 1) le hlahisoa ke moamoheli. Lintlha tse ntle tsa lioache tse kenang ka har'a transceiver ea SFP likarolong tseo tsa E2PROM tse sa sirelelitsoeng ka mokhoa o ngotsoeng. Lintlha tse mpe tsa lioache tse tsoang ho transceiver ea SFP. Letšoao la data la serial (SDA, Mod Def 2) le na le mahlakore a mabeli bakeng sa phetisetso ea data. Moamoheli o sebelisa SDA hammoho le SCL ho tšoaea qalo le pheletso ea ts'ebetso ea serial protocol.
Mehopolo e hlophisitsoe e le letoto la mantsoe a data a 8-bit a ka buuoang ka bonngoe kapa ka tatellano.
Khothalletsa Circuit Schematic
Litlhaloso tsa Mechini (Yuniti: mm)
Tumellano ea Taolo
Sebopeho | Referense | Tshebetso |
Electrostatic discharge (ESD) | IEC/EN 61000-4-2 | E lumellana le litekanyetso |
Tšitiso ea Motlakase (EMI) | FCC Karolo ea 15 Sehlopha sa B EN 55022 Sehlopha sa B (CISPR 22A) | E lumellana le litekanyetso |
Tšireletso ea Mahlo a Laser | FDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1,2 | Sehlahisoa sa laser sa sehlopha sa 1 |
Kamohelo ea Karolo | IEC/EN 60950 UL | E lumellana le litekanyetso |
ROHS | 2002/95/EC | E lumellana le litekanyetso |
EMC | EN61000-3 | E lumellana le litekanyetso |
Haeba u batla tharollo ea thapo ea fiber optic e tšepahalang, e lebelo le holimo, se shebe hole ho feta OYI. Ikopanye le rona hona joale ho bona hore na re ka u thusa joang hore u lule u hokahane le ho isa khoebo ea hau boemong bo bong.