0755-23179541
sales@oyii.net
SFP-ETRx-4
10/100/1000 BASE-T Copper SFP Transceiver
SFP-ETRx-4
Tlhaloso ea Sehlahisoa
ER4 ke mojule oa transceiver o etselitsoeng lits'ebetso tsa puisano tsa optical tsa 40km. Moqapi o lumellana le 40GBASE-ER4 ea IEEE P802.3ba e tloaelehileng. Mojule o fetola liteishene tsa lisebelisoa tsa 4 (ch) tsa data ea motlakase ea 10Gb / s ho 4 CWDM optical signals, 'me e li ngatafatsa ka mocha o le mong bakeng sa 40Gb / s optical transmission. Ka lehlakoreng le leng, ka lehlakoreng la moamoheli, module optically demultiplexes ho kenya 40Gb / s ho lipontšo tsa liteishene tsa 4 CWDM, ebe o li fetolela ho data ea motlakase ea tlhahiso ea 4.
Maqhubu a bohareng a likanale tsa 4 CWDM ke 1271, 1291, 1311 le 1331 nm e le litho tsa marang-rang a marang-rang a CWDM a hlalositsoeng ho ITU-T G694.2. E na le aDuplex LC Adapterbakeng sa sebopeho sa optical le 38-pinadaptarabakeng sa sebopeho sa motlakase. Ho fokotsa ho hasana ha optical tsamaisong ea nako e telele, fiber ea mofuta o le mong (SMF) e tlameha ho sebelisoa mojuleng ona.
Sehlahisoa se entsoe ka sebopeho sa sebopeho, khokahano ea optical / motlakase le sebopeho sa tlhahlobo ea dijithale ho latela Tumellano ea QSFP Multi-Source (MSA). E etselitsoe ho kopana le maemo a thata ka ho fetisisa a ts'ebetso ea kantle ho kenyelletsa mocheso, mongobo le tšitiso ea EMI.
Mojule o sebetsa ho tloha ho matla a le mong + 3.3V le lipontšo tsa taolo ea lefats'e ea LVCMOS / LVTTL tse kang Module Present, Reset, Interrupt le Low Power Mode li fumaneha ka li-module. Khokahano ea serial ea 2-wire e fumaneha ho romella le ho amohela matšoao a thata a taolo le ho fumana tlhaiso-leseling ea tlhahlobo ea dijithale. Liteishene ka bomong li ka rarolloa 'me likanale tse sa sebelisoeng li ka koaloa bakeng sa maemo a phahameng a moralo.
TQP10 e entsoe ka sebopeho sa sebopeho, khokahano ea optical / motlakase le sebopeho sa tlhahlobo ea dijithale ho latela Tumellano ea Multi-Source ea QSFP (MSA). E etselitsoe ho kopana le maemo a thata ka ho fetisisa a ts'ebetso ea kantle ho kenyelletsa mocheso, mongobo le tšitiso ea EMI. Mojule o fana ka ts'ebetso e phahameng haholo le kopanyo ea likarolo, e fumanehang ka sebopeho sa serial sa terata tse peli.
Likarolo tsa Sehlahisoa
1. 4 CWDM litsela tsa MUX / DEMUX moralo.
2. Ho fihla ho 11.2Gbps ka bophara ba kanale.
3. Aggregate bandwidth ea > 40Gbps.
4. Sehokelo sa Duplex LC.
5. E lumellana le 40G Ethernet IEEE802.3ba le 40GBASE-ER4 Standard.
6. QSFP MSA e lumellana.
7. APD photo-detector.
8. Ho fihla ho 40 km phetiso.
9. Ho lumellana le litekanyetso tsa data tsa sehlopha sa QDR/DDR Infini.
10. Motlakase o le mong + 3.3V o sebetsa.
11. Mesebetsi ea tlhahlobo ea dijithale e hahiloeng kahare.
12. Boemo ba mocheso 0°C ho isa ho 70°C.
13. Karolo e Tlamahang ea RoHS.
Lisebelisoa
1. Rack ho rack.
2. Litsi tsa dataLi-switches le li-routers.
3. Metromarang-rang.
4. Li-switches le li-routers.
5. 40G BASE-ER4 Lihokelo tsa Ethernet.
| Phetiso |
|
|
|
|
| ||
| Mamello ea Mamello ea Voltage e le 'Ngoe |
| 0.3 |
| 4 | V | 1 |
|
| Mokhoa o tloaelehileng Mamello ea Voltage |
| 15 |
|
| mV |
|
|
| Fetisetsa Phano ea Matla a Kenyellelitsoeng | VI | 150 |
| 1200 | mV |
|
|
| Fetisetsa Input Diff Impedance | ZIN | 85 | 100 | 115 |
|
|
|
| Jitter e Itšetlehileng ka Lintlha | DDJ |
| 0.3 |
| UI |
|
|
|
| Moamoheli |
|
|
|
|
| |
| Mamello ea Mamello ea Voltage e le 'Ngoe |
| 0.3 |
| 4 | V |
|
|
| Rx Output Diff Voltage | Vo | 370 | 600 | 950 | mV |
|
|
| Rx Output Rise and Fall Voltage | Tr/Tf |
|
| 35 | ps | 1 |
|
| Kakaretso ea Jitter | TJ |
| 0.3 |
| UI |
| |
Hlokomela:
1.20-80%
Optical Parameters (TOP = 0 ho 70 °C, VCC = 3.0 ho 3.6 Volts)
| Paramethara | Letšoao | Min | Tlanya | Max | Yuniti | Ref. |
|
| Phetiso |
|
| |||
| Kabelo ea Wavelength | L0 | 1264.5 | 1271 | 1277.5 | nm |
|
| L1 | 1284.5 | 1291 | 1297.5 | nm |
| |
| L2 | 1304.5 | 1311 | 1317.5 | nm |
| |
| L3 | 1324.5 | 1331 | 1337.5 | nm |
| |
| Side-mode Suppression Ratio | SMSR | 30 | - | - | dB |
|
| Kakaretso ea Kakaretso ea Matla a Launch | PT | - | - | 10.5 | dBm |
|
| Fetisetsa OMA ka Lane | TxOMA | 0 |
| 5.0 | dBm |
|
| Karolelano ea Matla a Launch, Lane ka 'ngoe | TXPx | 0 |
| 5.0 | dBm |
|
| Phapang ho Matla a ho Launch lipakeng tsa Litsela tse peli (OMA) |
| - | - | 4.7 | dB |
|
| TDP, e 'ngoe le e 'ngoeLane | TDP |
|
| 2.6 | dB |
|
| Karolelano ea Phello | ER | 5.5 | 6.5 |
| dB |
|
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} |
| {0.25,0.4,0.45,0.25,0.28,0.4} |
|
| ||
| Mamello ea Tahlehelo ea Optical Return |
| - | - | 20 | dB |
|
| Karolelano ea Launch OFF Transmitter, e 'ngoe le e 'ngoe Lane | Poff |
|
| -30 | dBm |
|
| Lerata le Matla a Batlang | Rin |
|
| -128 | dB/HZ | 1 |
| Mamello ea Tahlehelo ea Optical Return |
| - | - | 12 | dB |
|
|
| Moamoheli |
|
| |||
| Tšenyo Moetla | THd | 0 |
|
| dBm | 1 |
| Sensitivity ea Moamoheli (OMA) ka Lane | Rxsens | -21 |
| -6 | dBm |
|
| Receiver Power (OMA), Lane ka 'ngoe | RxOMA | - | - | -4 | dBm |
|
| Sensitivity e Hatelitsoeng ea Moamoheli (OMA) ka Lane | SRS |
|
| -16.8 | dBm |
|
| RSSI Ho Nepaha |
| -2 |
| 2 | dB |
|
| Reflectance ea moamoheli | Rrx |
|
| -26 | dB |
|
| Fumana Motlakase 3 dB ka holimo Cutoff Frequency, mong le e mong Lane |
|
|
| 12.3 | GHz |
|
| LOS De-Assert | TAHLEHELO |
|
| -23 | dBm |
|
| Tsebo ea LOS | LOSA | -33 |
|
| dBm |
|
| LOS Hysteresis | TLHOKOMELO | 0.5 |
|
| dB | |
Hlokomela
1. 12dB Pontšo
Diagnostic Monitoring Interface
Ts'ebetso ea ho lekola tlhahlobo ea dijithale e fumaneha ho tsohle QSFP+ ER4. Sesebelisoa sa serial sa 2-wire se fana ka mosebelisi ho ikopanya le mojule. Sebopeho sa mohopolo se bontšoa ka ho phalla. Sebaka sa mohopolo se hlophisitsoe ka tlase, leqephe le le leng, sebaka sa aterese sa li-byte tse 128 le maqephe a mangata a holimo a aterese. Sebopeho sena se lumella ho fihlella ka nako liaterese leqepheng le ka tlase, joalo ka Thibela
Lifolakha le Bahlahlobisisi. Kenyelletso ea nako e fokolang ea nako, joalo ka tlhaiso-leseling ea serial ID le litlhophiso tsa threshold, lia fumaneha ka ts'ebetso ea Khetho ea Leqephe. Aterese ea sehokelo e sebelisitsoeng ke A0xh mme e sebelisoa haholo bakeng sa data ea bohlokoa ea nako joalo ka ho ts'oaroa ha nako e le ho etsa hore ho baloe hanngoe bakeng sa data eohle e amanang le boemo ba tšitiso. Kamora tšitiso, ho netefalitsoe Intl, moamoheli a ka bala lebala la folakha ho tseba mocha le mofuta oa folakha.
EEPROM Serial ID Memory Contents (A0h)
| Aterese ea Lintlha | Bolelele (Byte) | Lebitso la Bolelele | Tlhaloso le Litaba |
| Libaka tsa ID tsa Motheo | |||
| 128 | 1 | Sekhetho | Mofuta oa Sekhetho oa serial Module(D=QSFP+) |
| 129 | 1 | Ext. Sekhetho | Identifier E Ekelitsoeng ea Serial Module(90=2.5W) |
| 130 | 1 | Sehokedi | Khoutu ea mofuta oa sehokelo(7=LC) |
| 131-138 | 8 | Ho latela lintlha | Khoutu ea ho tsamaellana le elektroniki kapa ho lumellana ha optical(40GBASE-LR4) |
| 139 | 1 | Khouto | Khoutu ea seriale khouto algorithm(5=64B66B) |
| 140 | 1 | BR, Lebitso | Sekhahla sa biti ka lebitso, likarolo tsa 100 MB eonas/s(6C=108) |
| 141 | 1 | Litefiso tse atolositsoeng li khetha Ho lumellana | Li-tag bakeng sa ho lumellana le litekanyetso tse atolositsoeng |
| 142 | 1 | Bolelele (SMF) | Bolelele ba sehokelo bo tšehelitsoe bakeng sa fiber ea SMF ka km (28=40KM) |
| 143 | 1 | Bolelele (OM3 50m) | Bolelele ba lihokelo bo tšehetsoeng bakeng sa EBW 50/125um fiber (OM3), likarolo tsa 2m |
| 144 | 1 | Bolelele (OM2 50m) | Bolelele ba lihokelo bo tšehelitsoe bakeng sa 50/125um fiber (OM2), likarolo tsa 1m |
| 145 | 1 | Bolelele (OM1 62.5m) | Bolelele ba lihokelo bo tšehetsoeng bakeng sa 62.5 / 125um fiber (OM1), li-unit tsa 1m |
| 146 | 1 | Bolelele (Koporo) | Bolelele ba khokahanyo ea thapo ea koporo kapa e sebetsang, e kopanya bolelele ba 1m Link e tšehelitsoeng bakeng sa 50/125um fiber (OM4), likarolo tsa 2m ha Byte 147 e phatlalatsa 850nm VCSEL joalokaha ho hlalositsoe ho Lethathamo la 37. |
| 147 | 1 | Theknoloji ea lisebelisoa | Theknoloji ea lisebelisoa |
| 148-163 | 16 | Lebitso la morekisi | QSFP+ lebitso la morekisi: TIBTRONIX (ASCII) |
| 164 | 1 | E atolositsoeng Module | Likhoutu tse atolositsoeng tsa Module bakeng sa InfiniBand |
| 165-167 | 3 | Morekisi OUI | QSFP+ morekisi ID ea k'hamphani ea IEEE (000840) |
| 168-183 | 16 | Morekisi PN | Nomoro ea karolo: TQPLFG40D (ASCII) |
| 184-185 | 2 | Morekisi rev | Boemo ba ntlafatso bakeng sa karolo ea nomoro e fanoeng ke morekisi (ASCII) (X1) |
| 186-187 | 2 | Bolelele ba maqhubu kapa Mohala oa koporo Khatholoho | Leqhubu la leqhubu la laser (wavelength=boleng/20 ho nm) kapa ho fokotsa thapo ea koporo ho dB ho 2.5GHz (Adrs 186) le 5.0GHz (Adrs 187) (65A4=1301) |
| 188-189 | 2 | Mamello ya wavelength | Leqhubu le tiisitsoeng la laser wavelength (+/- boleng) ho tloha ho wavelength ka lebitso. (wavelength Tol=boleng/200 ho nm) (1C84=36.5) |
| 190 | 1 | Mocheso o phahameng oa mocheso | Maximum case mocheso ka likhato C (70) |
| 191 | 1 | CC_BASE | Sheba khoutu bakeng sa likarolo tsa ID tsa motheo (liaterese 128-190) |
Setšoantšo sa Thibelo ea Transceiver
Mechanical Dimensions
-
ADSS Suspension Clamp Type A
Setsi sa ho emisoa sa ADSS se entsoe ka lisebelisoa tse phahameng tsa tšepe tse entsoeng ka tšepe, tse nang le bokhoni bo phahameng ba ho hanyetsa kutu 'me li ka lelefatsa tšebeliso ea bophelo bohle. Likaroloana tse bonolo tsa rabara li ntlafatsa ho itšehla thajana le ho fokotsa ho ruruha.
-
SC/APC SM 0.9MM 12F
Fiber optic fanout pigtails e fana ka mokhoa o potlakileng oa ho theha lisebelisoa tsa puisano tšimong. Li entsoe, li entsoe, 'me li lekoa ho latela liprothokholo le litekanyetso tsa ts'ebetso tse behiloeng ke indasteri, li kopana le litlhaloso tsa hau tse thata ka ho fetesisa tsa mochini le ts'ebetso.
Fiber optic fanout pigtail ke bolelele ba thapo ea faeba e nang le sehokelo sa li-multi-core se tsitsitseng ntlheng e le 'ngoe. E ka aroloa ka mokhoa o le mong le mefuta e mengata ea fiber optic pigtail e thehiloeng ho mokhoa oa phetisetso; e ka aroloa ka FC, SC, ST, MU, MTRJ, D4, E2000, LC, joalo-joalo, ho itšetlehile ka mofuta oa sebopeho sa sehokelo; 'me e ka aroloa ka PC, UPC, le APC ho ipapisitsoe le sefahleho se betliloeng sa ceramic.
Oyi e ka fana ka mefuta eohle ea lihlahisoa tsa optic fiber pigtail; mokhoa oa phetiso, mofuta oa thapo ea optical, le mofuta oa sehokelo li ka etsoa ha ho hlokahala. E fana ka phetisetso e tsitsitseng, ts'epahalo e phahameng, le ho itloaetsa, ho e etsa hore e sebelisoe haholo maemong a marang-rang a optical joalo ka liofisi tse bohareng, FTTX, le LAN, jj.
-
16 Cores Mofuta oa OYI-FAT16B Terminal Box
16-core OYI-FAT16Blebokose la terminal la opticale sebetsa ho latela litlhoko tsa maemo a indasteri tsa YD/T2150-2010. E sebelisoa haholo-holo hoSistimi ea phihlello ea FTTXsehokelo sa terminal. Lebokose le entsoe ka PC e matla a phahameng, mochini oa ente ea polasetiki ea ABS, e fanang ka tiiso e ntle le ho hanyetsa botsofali. Ho phaella moo, e ka fanyehoa leboteng ka ntle kapaka tlung bakeng sa ho kenyale tšebeliso.
Lebokose la OYI-FAT16B optical terminal le na le moralo o ka hare o nang le sebopeho sa lera le le leng, se arotsoe ka sebaka sa mohala oa kabo, ho kenya cable ka ntle, tray ea fiber splicing, le FTTH.theola mohala oa opticalpolokelo. Lithapo tsa fiber optical li hlakile haholo, li etsa hore ho be bonolo ho sebetsa le ho li hlokomela. Ho na le masoba a 2 ka tlas'a lebokose le ka amohelang 2likhoele tsa kantle tsa mahlobakeng sa mateano a tobileng kapa a fapaneng, 'me e ka boela ea amohela lithapo tsa optical tsa 16 FTTH bakeng sa likhokahano tsa ho qetela. Terei e kopanyang fiber e sebelisa foromo e feto-fetohang 'me e ka hlophisoa ka lintlha tse 16 tsa bokhoni ba li-cores ho lumellana le litlhoko tsa katoloso tsa lebokose. -
Mofuta oa FC
Fiber optic adapter, eo ka linako tse ling hape e bitsoang coupler, ke sesebelisoa se senyenyane se etselitsoeng ho felisa kapa ho hokahanya likhoele tsa fiber optic kapa likhokahano tsa fiber optic lipakeng tsa mela e 'meli ea fiber optic. E na le sleeve ea khokahanyo e ts'oereng li-ferrules tse peli hammoho. Ka ho hokahanya likhokahano tse peli ka nepo, li-adapter tsa fiber optic li lumella mehloli ea leseli hore e fetisoe ka bongata ba eona le ho fokotsa tahlehelo ka hohle kamoo ho ka khonehang. Ka nako e ts'oanang, li-adapter tsa fiber optic li na le melemo ea tahlehelo e tlase ea ho kenya, ho fapanyetsana hantle, le ho ikatisa. Li sebelisetsoa ho hokahanya likhokahano tsa optical fiber tse kang FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, joalo-joalo Li sebelisoa haholo lisebelisoa tsa puisano tsa fiber optical, lisebelisoa tsa ho lekanya, joalo-joalo. Ts'ebetso e tsitsitse ebile e ka tšeptjoa.
-
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U ke fiber optic e matla haholopatch panel tkatiba entsoe ka boleng bo phahameng batang moqolo tšepe thepa, bokaholimo ke ka electrostatic phofo fafatsa. Ke mofuta o thellang oa 1U bolelele bakeng sa ts'ebeliso e kentsoeng ea rack ea 19-inch. E na le literei tsa polasetiki tse 3pcs tse thellang, terei e 'ngoe le e 'ngoe e thellang e na le lik'hasete tsa 4pcs MPO. E ka kenya lik'hasete tsa MPO tsa 12pcs HD-08 bakeng sa max. 144 khokahanyo le kabo ea fiber. Ho na le poleiti ea taolo ea li-cable e nang le masoba ka morao ho patch panel.
-
Mini Steel Tube Mofuta oa Splitter
Fiber optic PLC splitter, e tsejoang hape e le "beam splitter", ke sesebelisoa se kopaneng sa waveguide optical power distribution se thehiloeng holim'a substrate ea quartz. E tšoana le tsamaiso ea coaxial cable transmission. Tsamaiso ea marang-rang ea optical e boetse e hloka hore letšoao la optical le kopanngoe le kabo ea lekala. Fiber optic splitter ke e 'ngoe ea lisebelisoa tsa bohlokoahali tsa sehokelo sa fiber optical. Ke sesebelisoa sa optical fiber tandem se nang le li-terminals tse ngata tsa ho kenya le li-terminals tse ngata tsa tlhahiso. E sebetsa ka ho khetheha ho marang-rang a marang-rang a marang-rang (EPON, GPON, BPON, FTTX, FTTH, joalo-joalo) ho hokahanya ODF le lisebelisoa tsa ho qetela le ho finyella branching ea pontšo ea optical.
Haeba u batla tharollo ea thapo ea fiber optic e tšepahalang, e lebelo le holimo, se shebe hole ho feta OYI. Ikopanye le rona hona joale ho bona hore na re ka u thusa joang hore u lule u hokahane le ho isa khoebo ea hau boemong bo bong.
