0755-23179541
sales@oyii.net
SFP-ETRx-4
10/100/1000 BASE-T tooj liab SFP Transceiver
SFP-ETRx-4
Khoom nta
1.Txog li 1.25 Gb/s ob-directional cov ntaub ntawv txuas.
2.Txuas ntev ntawm 1.25 Gb/s mus txog 100 meters.
3.10/100/1000 PIB-Tkev ua haujlwm hauv cov tshuab host nrog SGMII interface.
4.Txhawb TX- lov tes taw thiab txuas ua haujlwm.
5.Ua raws li SFP MSA.
6.Compact RJ-45 connector los ua ke.
7.Hot-pluggable SFP Footprint.
8.Ib leeg + 3.3V Fais fab mov.
9.Fully Metallic Enclosure rau Tsawg EMI.
10. Tsawg zog dissipation (1.05W ib txwm).
11.RoHS ua raws thiab tsis muaj txhuas.
12.Operating case kub Commercial: 0 ~ +70oC.
Txuas ntxiv: -10 ~ + 80oC.
Kev lag luam: -40 ~ + 85oC.
Technical Specifications
1.LAN 1000Base-T.
2. Hloov mus Hloov Interface.
3.Router/Server interface.
4.witched backplane daim ntawv thov.
| Tshooj Naj Npawb | Cov ntaub ntawv tus nqi (Mb/s) | Kev sib kis nrug (m) | Link Indicator on RX-LOS pin | TX-lov tes taw nrog PHY | Kub (oC) (Kev khiav hauj lwm Case) |
| OPT-ETRC-4 | 10/100/1000 | 100 | Yog lawm | Yog lawm | 0 ~ 70 kev lag luam |
| OPT-ETRE-4 | 10/100/1000 | 100 | Yog lawm | Yog lawm | -10 ~ 80 Ntxiv |
| OPT-ETRI-4 | 10/100/1000 | 100 | Yog lawm | Yog lawm | -40 ~ 85 Industrial |
1. Kev ntsuas siab tshaj plaws
Nws yuav tsum tau muab sau tseg tias kev ua hauj lwm nyob rau hauv ntau tshaj ntawm ib tug neeg qhov siab tshaj plaws kev ntsuam xyuas yuav ua rau puas mus tas li rau qhov module no.
| Parameter | Cim | Min | Max | Chav tsev | Sau ntawv |
| Cia Kub | TS | -40 | 85 | oC |
|
| Fais fab mov Voltage | VCC | -0.5 | 3.6 | V |
|
| Relative Humidity (tsis-condensation) | RH | 5 | 95 | % |
2. Pom zoo rau kev ua haujlwm thiab cov kev xav tau ntawm kev siv hluav taws xob
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| Kev khiav hauj lwm Case Temperature | TOP | 0 | 70 | oC | kev lag luam | |
| -10 | 80 | txuas ntxiv | ||||
| -40 | 85 | kev lag luam | ||||
| Fais fab mov Voltage | VCC | 3.135 ib | 3.3 | 3.465 ib | V | |
| Cov ntaub ntawv tus nqi | 10 | 1000 | Mb/s | |||
| Txuas qhov nrug (SMF) | D | 100 | m |
3. Pin Assignment thiab Pin Description
Daim duab 1. Daim duab ntawm host boardtxuas thaiv tus pin naj npawb thiab npe.
| PIN | Lub npe | Lub npe / piav qhia | Sau ntawv |
| 1 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
| 2 | TXFAULT | Transmitter txhaum. |
|
| 3 | TXDIS | Transmitter Disable. Laser output disabled nyob rau siab los yog qhib. |
|
| 4 | MOD-DEF (2) | Module Definition 2. Cov ntaub ntawv kab rau Serial ID. | 2 |
| 5 | MOD-DEF (1) | Module Definition 1. Clock kab rau Serial ID. | 2 |
| 6 | MOD-DEF (0) | Module txhais 0. Grounded nyob rau hauv lub module. | 2 |
| 7 | Rate Xaiv | Tsis xav tau kev sib txuas |
|
| 8 | LOS | Poob qhov taw qhia taw qhia. Logic 0 qhia txog kev ua haujlwm ib txwm muaj. | 3 |
| 9 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 10 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 11 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 12 | RD- | Receiver Inverted DATA tawm. AC Coupled |
|
| 13 | RD+ | Receiver Tsis-inverted DATA tawm. AC Coupled |
|
| 14 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 15 | VCCR | Txais Cov Khoom Siv Hluav Taws Xob |
|
| 16 | VCCT | Transmitter fais fab mov |
|
| 17 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
| 18 | TSI + | Transmitter Tsis-Inverted DATA nyob rau hauv. AC Coupled. |
|
| 19 | TD- | Transmitter Inverted DATA nyob rau hauv. AC Coupled. |
|
| 20 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
Nco tseg:
1.Circuit av txuas nrog chassis av.
2.Yuav tsum tau rub nrog 4.7k - 10k Ohms ntawm lub rooj tsavxwm rau lub zog ntawm 2.0 V thiab 3.6 V.
MOD-DEF (0) rub kab qis los qhia tias module tau ntsaws rau hauv.
3.LVTTL tau tshaj qhov siab tshaj plaws ntawm 2.5V.
4. Fais fab mov Interface Electronic yam ntxwv
OPT-ETRx-4 muaj qhov input voltage ntau ntawm 3.3 V ± 5%. Lub 4V siab tshaj voltage tsis tso cai rau kev ua haujlwm tas mus li.
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| Kev siv fais fab |
|
|
| 1.2 | W |
|
| Cov khoom siv tam sim no | Icc |
|
| 375 | mA |
|
| Input Voltage kam rau ua |
| -0.3 |
| 4.0 | V |
|
| Surge | Surge |
| 30 |
| mV |
|
| Tam sim no |
| current Saib ceev faj note |
| |||
Lus Cim: Kev siv hluav taws xob thiab hluav taws xob tam sim no siab dua li cov nqi teev hauv SFP MSA.
5. Tsawg-Speed signals Electronic yam ntxwv
MOD-DEF (1) (SCL) thiab MOD-DEF (2) (SDA) yog qhib CMOS teeb liab. Ob leeg MOD-DEF (1) thiab MOD-DEF (2) yuav tsum tau rub mus rau tus tswv-VCC.
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| SFP tso zis qis | VOL | 0 |
| 0.5 | V | 4.7k rau 10k rub-up rau host-Vcc. |
| SFP tso zis siab | VOH | Tus tswv-Vcc -0.5 |
| Tus tswv-Vcc +0.3 | V | 4.7k rau 10k rub-up rau host-Vcc. |
| SFP Input LOW | VIL | 0 |
| 0.8 ua | V | 4.7k txog 10k rub-up rau Vcc. |
| SFP Input HIGH | VIH | 2 |
| Txc + 0.3 | V | 4.7k txog 10k rub-up rau Vcc. |
6. High-Speed Electrical Interface
Tag nrho cov teeb liab ceev yog AC-coupled sab hauv.
| High-Speed Electrical Interface, Transmission Line-SFP | ||||||
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| Kab Zaus | FL |
| 125 |
| MHz | 5-theem encoding, pe IEEE 802.3 |
| Tx Output Impedance | Zout, TX |
| 100 |
| Ohm | Sib txawv |
| Rx Input Impedance | Zin, RX |
| 100 |
| Ohm | Sib txawv |
|
| High-Speed Electrical Interface, Host-SFP | |||||
| Cov Ntaub Ntawv Ib Leeg Kawg Input Swing | Vinsing | 250 |
| 1200 | mv | Ib leeg tas lawm |
| Single Ende Cov ntaub ntawv tso zis viav vias | Voutsing | 350 |
| 800 | mv | Ib leeg tas lawm |
| Nce / Caij Nplooj Hlav | Tr, TF |
| 175 |
| PS | 20% -80% |
| Tx Input Impedance | Zin |
| 50 |
| Ohm | Ib leeg tas lawm |
| Rx tso zis impedance | Zout |
| 50 |
| Ohm | Ib leeg tas lawm |
7. General Specifications
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| Cov ntaub ntawv tus nqi | BR | 10 |
| 1000 | Mb/s | IEEE 802.3 tau tshaj |
| Cable Ntev | L |
|
| 100 | m | Qeb 5 UTP. BER <10-12 |
Nco tseg:
1.Clock kam rau ua yog +/- 50 ppm.
2.Los ntawm lub neej ntawd, OPT-ETRx-4 yog tag nrho cov khoom siv duplex hauv hom nyiam tus tswv.
3.Tsis siv neeg crossover nrhiav tau qhib. Sab nraud crossover cable tsis tas yuav tsum tau.
4.Los ntawm lub neej ntawd, 1000 BASE-T kev ua haujlwm yuav tsum muaj tus tswv tsev kom muaj SERDES interface tsis muaj moos.
8. Serial Communication Protocol
OPT-ETRx-4 txhawb nqa 2-wire serial kev sib txuas lus raws tu qauv tau teev tseg hauv SFP MSA. Nws siv Atmel AT24C02D 256byte EEPROM nrog qhov chaw nyob ntawm A0h.
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| 12C moos tus nqi |
| 0 |
| 100000 | Hz |
-
OYI-FTB-10A Terminal Box
Cov cuab yeej siv los ua qhov chaw txiav tawm rau lub feeder cable txuas nrogpoob kabhauv FTTx kev sib txuas lus network system. Cov fiber ntau splicing, splitting, faib yuav ua tau nyob rau hauv lub thawv no, thiab lub caij no nws muab kev tiv thaiv thiab kev tswj cov khoom.FTTx network building.
-
Non-metallic Strength Member Lub Teeb-armored Dire ...
Cov fibers tau muab tso rau hauv lub raj xoob ua los ntawm PBT. Lub raj yog ntim nrog dej-resistant filling compound. Ib tug FRP hlau nyob rau hauv nruab nrab ntawm cov tub ntxhais ua ib tug metallic zog tswv cuab. Cov hlab ntsha (thiab cov fillers) raug tso tseg nyob ib ncig ntawm lub zog cov tswv cuab rau hauv ib qho kev sib cog lus thiab lub voj voog. Cov tub ntxhais cable yog ntim nrog cov filling compound los tiv thaiv nws los ntawm dej ingress, tshaj uas nyias PE puab sheath yog thov. Tom qab lub PSP yog longitudinally thov nyob rau hauv lub puab sheath, lub cable tiav nrog ib tug PE (LSZH) txheej sheath.
-
OYI F Hom Fast Connector
Peb fiber optic ceev connector, hom OYI F, yog tsim los rau FTTH (Fiber Rau Lub Tsev), FTTX (Fiber Rau X). Nws yog ib tiam tshiab ntawm fiber ntau connector siv nyob rau hauv sib dhos uas muab qhib txaus thiab precast hom, ua tau raws li qhov kho qhov muag thiab mechanical specifications ntawm standard optical fiber connectors. Nws yog tsim los rau kev ua haujlwm siab thiab kev ua haujlwm siab thaum lub sijhawm teeb tsa.
-
LGX Ntxig Cassette Hom Splitter
Fiber optic PLC splitter, tseem hu ua beam splitter, yog ib qho kev sib xyaw waveguide optical fais fab faib khoom raws li lub quartz substrate. Nws zoo ib yam li coaxial cable kis tau tus mob. Lub kaw lus kho qhov muag kuj tseem xav tau lub teeb liab kho qhov muag los ua ke rau cov ceg faib. Lub fiber optic splitter yog ib qho tseem ceeb tshaj plaws passive li nyob rau hauv qhov sib txuas ntawm fiber ntau optic. Nws yog ib qho khoom siv kho qhov muag fiber ntau nrog ntau lub tswv yim terminals thiab ntau qhov tso zis terminals. Nws yog tshwj xeeb tshaj yog muaj feem xyuam rau ib tug passive optical network (EPON, GPON, BPON, FTTX, FTTH, thiab lwm yam) los mus txuas lub ODF thiab lub davhlau ya nyob twg cov cuab yeej thiab mus cuag lub branching ntawm lub optical teeb liab.
-
OYI-FAT16D Terminal Box
16-core OYI-FAT16D optical davhlau ya nyob twg lub thawv ua tau raws li kev lag luam tus qauv yuav tsum muaj ntawm YD / T2150-2010. Nws yog tsuas yog siv nyob rau hauv FTTX nkag system davhlau ya nyob twg txuas. Lub thawv yog tsim los ntawm lub zog siab PC, ABS yas alloy txhaj tshuaj molding, uas muab kev sib khi zoo thiab kev laus ua haujlwm. Tsis tas li ntawd, nws tuaj yeem dai rau ntawm phab ntsa sab nraum zoov lossis sab hauv tsev rau kev teeb tsa thiab siv.
-
Loose Tube Non-metallic Heavy Type Rodent Prote...
Ntxig cov fiber ntau optical rau hauv PBT xoob raj, sau lub raj xoob nrog cov tshuaj pleev dej tsis zoo. Qhov nruab nrab ntawm cov tub ntxhais cable yog ib qho uas tsis yog-metallic reinforced core, thiab qhov sib txawv yog sau nrog cov tshuaj pleev xim tsis muaj dej. Lub raj xoob (thiab muab tub lim) yog twisted nyob ib ncig ntawm qhov chaw kom ntxiv dag zog rau cov tub ntxhais, sib sau ua ib qho kev cog lus thiab lub voj voog cable. Ib txheej ntawm cov khoom siv tiv thaiv yog extruded sab nraum cov tub ntxhais cable, thiab iav xov paj yog muab tso rau sab nraum lub raj tiv thaiv raws li cov ntaub ntawv pov thawj nas. Tom qab ntawd, ib txheej ntawm cov khoom siv tiv thaiv polyethylene (PE) yog extruded.
Yog tias koj tab tom nrhiav kev txhim khu kev qha, kev kub ceev fiber ntau optic cable daws, saib tsis pub dhau OYI. Hu rau peb tam sim no kom pom tias peb tuaj yeem pab koj txuas nrog thiab coj koj txoj kev lag luam mus rau qib tom ntej.
