0755-23179541
sales@oyii.net
Module OYI-1L311xF
1250Mb/s SFP 1310nm 10km Optical Transceiver
Module OYI-1L311xF
Product Description
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers yog sib xws nrog Daim Ntawv Pom Zoo Me Me Pluggable Multi-Sourcing Daim Ntawv Pom Zoo (MSA), Lub transceiver muaj tsib ntu: tus tsav tsheb LD, lub limiting amplifier, digital diagnostic monitor, FP laser thiab tus PIN 1 photo-ntaub ntawv txuas mus txog 2 km, ib qho kev sib txuas lus hom fiber ntau.
Cov khoom siv kho qhov muag tuaj yeem raug cuam tshuam los ntawm TTL logic qib siab cov tswv yim ntawm Tx Disable, thiab lub kaw lus kuj 02 tuaj yeem lov tes taw module ntawm I2C. Tx Fault yog muab los qhia tias degradation ntawm lub laser. Poob lub teeb liab (LOS) tso zis yog muab los qhia qhov poob ntawm qhov kev tawm tswv yim kho qhov muag ntawm tus txais lossis qhov txuas nrog tus khub. Lub kaw lus tseem tuaj yeem tau txais LOS (lossis Txuas) / Disable / Fault cov ntaub ntawv ntawm I2C tso npe nkag.
Khoom nta
1. Mus txog 1250Mb/s cov ntaub ntawv txuas.
2. 1310nm FP laser transmitter thiab tus PIN yees duab-ntaus.
3. Mus txog 10km ntawm 9/125µm SMF.
4. Kub-pluggableSFPhneev taw.
5. Duplex LC / UPC hom pluggable optical interface.
6. Tsawg zog dissipation.
7. Hlau enclosure, rau qis EMI.
8. RoHS ua raws thiab tsis muaj txhuas.
9. Txhawb Digital Diagnostic Monitoring interface.
10. Ib leeg +3.3V fais fab mov.
11. Ua raws li SFF-8472.
12. Case kev khiav hauj lwm kub
Kev lag luam: 0 ~ + 70 ℃
Txuas ntxiv: -10 ~ + 80 ℃
Kev lag luam: -40 ~ + 85 ℃
Daim ntawv thov
1. Hloov mus rau Hloov Interface.
2. Gigabit Ethernet.
3. Hloov daim ntawv thov rov qab.
4. Router/Server Interface.
5. Lwm yam kev sib txuas kho qhov muag.
Qhov siab tshaj qhov ntsuas
Nws yuav tsum tau muab sau tseg tias kev ua hauj lwm nyob rau hauv ntau tshaj ntawm ib tug neeg qhov siab tshaj plaws kev ntsuam xyuas yuav ua rau puas mus tas li rau qhov module no.
| Parameter | Cim | Min | Max | Chav tsev | Sau ntawv |
| Cia Kub | TS | -40 | 85 | °C |
|
| Fais fab mov Voltage | VCC | -0.3 | 3.6 | V |
|
| Relative Humidity (tsis-condensation) | RH | 5 | 95 | % |
|
| Kev puas tsuaj | THd | 5 |
| dBm ib |
|
2. Pom zoo rau kev ua haujlwm thiab cov kev xav tau ntawm kev siv hluav taws xob
| Parameter | Cim | Min | Hom | Max | Chav tsev | Sau ntawv |
| Kev khiav hauj lwm Case Temperature | TOP | 0 |
| 70 | °C | kev lag luam |
| -10 |
| 80 | txuas ntxiv | |||
| -40 |
| 85 | kev lag luam | |||
| Fais fab mov Voltage | VCC | 3.135 ib | 3.3 | 3.465 ib | V |
|
| Cov ntaub ntawv tus nqi |
|
| 1250 |
| Mb/s |
|
| Tswj input voltage siab |
| 2 |
| Vcc | V |
|
| Tswj Input Voltage Tsawg |
| 0 |
| 0.8 ua | V |
|
| Txuas qhov nrug (SMF) | D |
|
| 10 | km | 9/125 ib |
3.Pin Assignment thiab Pin Description
Daim duab 1. Daim duab ntawm tus tswv tsev board connector thaiv tus pin tus lej thiab npe
| PIN | Lub npe | Lub npe / piav qhia | Sau ntawv |
| 1 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
| 2 | TXFAULT | Transmitter txhaum. |
|
| 3 | TXDIS | Transmitter Disable. Laser output disabled nyob rau siab los yog qhib. | 2 |
| 4 | MOD_DEF(2) | Module Definition 2. Cov ntaub ntawv kab rau Serial ID. | 3 |
| 5 | MOD_DEF(1) | Module Definition 1. Clock kab rau Serial ID. | 3 |
| 6 | MOD_DEF(0) | Module txhais 0. Grounded nyob rau hauv lub module. | 3 |
| 7 | Rate Xaiv | Tsis xav tau kev sib txuas | 4 |
| 8 | LOS | Poob qhov taw qhia taw qhia. Logic 0 qhia txog kev ua haujlwm ib txwm muaj. | 5 |
| 9 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 10 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 11 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 12 | RD- | Receiver Inverted DATA tawm. AC Coupled |
|
| 13 | RD+ | Receiver Tsis-inverted DATA tawm. AC Coupled |
|
| 14 | VEER | Receiver Ground (Common nrog Transmitter Av) | 1 |
| 15 | VCCR | Txais Cov Khoom Siv Hluav Taws Xob |
|
| 16 | VCCT | Transmitter fais fab mov |
|
| 17 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
| 18 | TSI + | Transmitter Tsis-Inverted DATA nyob rau hauv. AC Coupled. |
|
| 19 | TD- | Transmitter Inverted DATA nyob rau hauv. AC Coupled. |
|
| 20 | VEET | Transmitter Ground (Common nrog Receiver Ground) | 1 |
Nco tseg:
1. Circuit Court hauv av yog nyob rau hauv cais tawm ntawm chassis hauv av.
2. Laser output disabled ntawm TDIS>2.0V los yog qhib, enabled ntawm TDIS <0.8V.
3. Yuav tsum tau rub nrog 4.7k-10k ohms ntawm lub rooj tsavxwm rau lub zog ntawm 2.0V thiab 3.6V.MOD_DEF
(0) rub kab qis kom qhia tias module tau ntsaws rau hauv.
4. Qhov no yog ib qho kev xaiv input siv los tswj cov receiver bandwidth rau compatibility nrog ntau cov ntaub ntawv tus nqi (feem ntau yuav Fiber Channel 1x thiab 2x tus nqi).Yog hais tias siv, cov tswv yim yuav raug rub down nrog> 30kΩ resistor. Cov input states yog:
1) Tsawg (0 - 0.8V): Txo Bandwidth 2) (> 0.8, < 2.0V): Undefined
3) Siab (2.0 - 3.465V): Tag nrho Bandwidth
4) Qhib: Txo Bandwidth
5. LOS yog qhib cov khoom tso tawm yuav tsum tau rub nrog 4.7k-10k ohms ntawm lub rooj tsav xwm tswj hwm mus rau qhov hluav taws xob ntawm 2.0V thiab 3.6V. Logic 0 qhia txog kev ua haujlwm ib txwm muaj; logic 1 qhia tias tsis muaj teeb liab.
Specification ntawm Transmitter Hluav Taws Xob Cov yam ntxwv
Cov yam ntxwv ntawm hluav taws xob hauv qab no tau txhais nyob rau hauv Kev Pom Zoo Ua Haujlwm Ib puag ncig tshwj tsis yog tau teev tseg.
| Parameter | Cim | Min. |
| Typical |
| Max | Chav tsev | Sau ntawv | ||
| Kev siv fais fab | P |
|
|
|
| 0.85 ib | W | kev lag luam | ||
|
|
|
|
| 0.9 | Kev lag luam | |||||
| Cov khoom siv tam sim no | Icc |
|
|
|
| 250 | mA | kev lag luam | ||
|
|
|
|
| 270 | Kev lag luam | |||||
|
|
| Transmitter |
|
|
|
| ||||
| Tib-kawg Input Voltage Ua siab ntev | VCC | -0.3 |
|
| 4.0 | V |
| |||
| Differential input voltage Swing | Vin, p | 200 |
|
| 2400 | mVpp |
| |||
| Sib txawv Input Impedance | Zin | 90 |
| 100 | 110 | Ohm |
| |||
| Transmit Disable Assert Time |
|
|
|
| 5 | us |
| |||
| Transmit Disable Voltage | Vdis | Vcc-1.3 |
|
| Vcc | V |
| |||
| Transmit Enable Voltage | Ven | Yees- 0.3 |
|
| 0.8 ua | V |
| |||
| Tus txais | ||||||||||
| Differential tso zis voltage Swing | Vuag, p | 500 |
|
| 900 | mVpp |
| |||
| Differential tso zis impedance | Zout | 90 |
| 100 | 110 | Ohm |
| |||
| Cov ntaub ntawv tso zis nce / poob lub sijhawm | Tr/Tf |
|
| 100 |
| ps | 20% mus rau 80% | |||
| LOS NTAWM Voltage | VlosH | Vcc-1.3 |
|
| Vcc | V |
| |||
| LOS NTAWM Voltage | VlosL | Yees- 0.3 |
|
| 0.8 ua | V |
| |||
Optical yam ntxwv
Cov yam ntxwv kho qhov muag hauv qab no tau txhais nyob rau hauv Kev Pom Zoo Ua Haujlwm Ib puag ncig tshwj tsis yog tau teev tseg.
| Parameter | Cim | Min. | Hom | Max | Chav tsev | Sau ntawv |
|
| Transmitter |
| ||||
| Center Wavelength | λC | 1270 | 1310 | 1360 | nm |
|
| Spectrum Bandwidth (RMS) | σ |
|
| 3.5 | nm |
|
| Nruab Nrab Optical Fais Fab | PAVG | -9 |
| -3 | dBm ib | 1 |
| Optical Extinction Ratio | ER | 9 |
|
| dB |
|
| Transmitter OFF tso zis zog | POff |
|
| -45 | dBm ib |
|
| Transmitter Qhov Muag Mask |
| Ua raws li 802.3z (chav kawm 1 laser kev nyab xeeb) | 2 | |||
|
| Tus txais |
| ||||
| Center Wavelength | λC | 1270 |
| 1610 | nm |
|
| Tus neeg txais txiaj ntsig (Nruab nrab Lub zog) | Sen. |
|
| -20 | dBm ib | 3 |
| Input Saturation zog (overload) | Psat | -3 |
|
| dBm ib |
|
| LOS Assert | LOSA | -36 |
|
| dB | 4 |
| LOS De-assert | LOSD |
|
| -21 | dBm ib | 4 |
| LOS Hysteresis | LOSH | 0.5 |
|
| dBm ib |
|
Nco tseg:
1.Measure at 2^7-1 NRZ PRBS pattern
2.Transmitter qhov muag daim npog qhov muag txhais.
3.Measured nrog lub teeb 1310nm, ER = 9dB; PEB =<10^-12
@PRBS=2^7-1 NRZ
4.Thaum LOS de-asserted, cov ntaub ntawv RX +/- cov zis yog High-theem (taag).
Digital Diagnostic Functions
Cov yam ntxwv kev kuaj mob digital hauv qab no tau txhais nyob rau hauv Kev Pom Zoo Ua Haujlwm Ib puag ncig tshwj tsis yog tau teev tseg. Nws yog ua raws li SFF-8472 Rev10.2 nrog rau sab hauv calibration hom. Rau sab nraud calibration hom thov hu rau peb cov neeg ua haujlwm muag.
| Parameter | Cim | Min. | Max | Chav tsev | Sau ntawv |
| Temperature monitor absolute yuam kev | DMI_ Temp | -3 | 3 | °C | Tshaj kev khiav hauj lwm temp |
| Supply voltage saib qhov yuam kev | DMI _VCC | -0.15 | 0.15 | V | Kev khiav hauj lwm tag nrho |
| RX fais fab saib xyuas qhov yuam kev | DMI_RX | -3 | 3 | dB |
|
| Bias tam sim no saib | DMI_bias | -10% | 10% | mA |
|
| TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
|
Mechanical Dimensions
Daim duab 2. Mechanical Outline
Ordering Informationn
| Tshooj Naj Npawb | Cov ntaub ntawv tus nqi (Gb/s) | Lub wavelength (nm) | Kev sib kis Qhov deb (km) | Kub (oC) (Operating Case) |
| YOG-1L311CF | 1.25 | 1310 | 10km swb | 0 ~ 70 kev lag luam |
| OYI-1L311EF | 1.25 | 1310 | 10km swb | -10 ~ 80 Ntxiv |
| OYI-1L311IB | 1.25 | 1310 | 10km swb | -40 ~ 85 Industrial |
-
OYI3434G4R
ONU khoom yog cov khoom siv davhlau ya nyob twg ntawm cov khoom siv ntawm XPON uas ua raws li ITU-G.984.1/2/3/4 tus qauv thiab ua tau raws li lub zog txuag ntawm G.987.3 raws tu qauv,ONUyog ua raws li kev paub tab thiab ruaj khov thiab tus nqi siab GPON thev naus laus zis uas tau txais kev ua haujlwm siabXPONREALTEK chipset thiab muaj kev ntseeg siab, tswj tau yooj yim, hloov tau yooj yim, ruaj khov, kev pabcuam zoo lav (Qos).
-
Bare Fiber Hom Splitter
Fiber optic PLC splitter, tseem hu ua beam splitter, yog ib qho kev sib xyaw waveguide optical fais fab faib khoom raws li lub quartz substrate. Nws zoo ib yam li coaxial cable kis tau tus mob. Lub kaw lus kho qhov muag kuj tseem xav tau lub teeb liab kho qhov muag los ua ke rau cov ceg faib. Lub fiber optic splitter yog ib qho tseem ceeb tshaj plaws passive li nyob rau hauv qhov sib txuas ntawm fiber ntau optic. Nws yog ib qho khoom siv kho qhov muag fiber ntau nrog ntau lub ntsiab lus nkag thiab ntau qhov chaw tso tawm, thiab tshwj xeeb tshaj yog siv tau rau kev siv kho qhov muag tsis pom kev (EPON, GPON, BPON, FTTX, FTTH, thiab lwm yam) txhawm rau txuas ODF thiab cov khoom siv davhlau ya nyob twg thiab ua tiav cov ceg ntawm cov teeb liab kho qhov muag.
-
OYI-FOSC-H5
OYI-FOSC-H5 dome fiber optic splice kaw yog siv rau hauv huab cua, phab ntsa-mounting, thiab hauv av daim ntaub ntawv rau txoj kev ncaj-dhau thiab branching splice ntawm fiber ntau cable. Dome splicing kaw yog kev tiv thaiv zoo heev ntawm fiber ntau optic pob qij txha los ntawm qhov chaw sab nraum zoov xws li UV, dej, thiab huab cua, nrog rau cov ntaub ntawv pov thawj thiab IP68 tiv thaiv.
-
SFP-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers yog raws li SFP Multi Source Agreement (MSA). Lawv ua tau raws li Gigabit Ethernet cov qauv raws li tau teev tseg hauv IEEE STD 802.3. 10/100/1000 BASE-T lub cev txheej txheej IC (PHY) tuaj yeem nkag tau ntawm 12C, tso cai nkag mus rau txhua qhov PHY thiab nta.
OPT-ETRx-4 yog sib xws nrog 1000BASE-X auto-negotiation, thiab muaj qhov txuas qhia qhov tshwj xeeb. PHY yog neeg xiam thaum TX lov tes taw siab lossis qhib.
-
MPO / MTP Lub cev Cables
Oyi MTP/MPO Trunk & Ntxuam-tawm trunk patch cords muab txoj hauv kev zoo rau nruab ntau cov cables sai. Nws kuj muab kev yooj yim rau kev tshem tawm thiab rov siv dua. Nws yog qhov tshwj xeeb tshaj yog haum rau cov cheeb tsam uas xav tau kev xa tawm sai ntawm cov pob txha caj qaum hauv cov ntaub ntawv, thiab cov chaw muaj fiber ntau rau kev ua haujlwm siab.
MPO / MTP ceg ntxuam tawm cable ntawm peb siv high-density multi-core fiber cables thiab MPO / MTP connector
los ntawm cov qauv nruab nrab ntawm cov ceg kom paub txog kev hloov ceg ntawm MPO / MTP rau LC, SC, FC, ST, MTRJ thiab lwm yam sib txuas. Muaj ntau hom 4-144 ib hom thiab ntau hom optical cables tuaj yeem siv tau, xws li G652D / G657A1 / G657A2 ib hom fiber ntau, multimode 62.5 / 125, 10G OM2 / OM3 / OM4, lossis 10G multimode optical cable nrog rau kev sib txuas ncaj qha rau LC. cables-ib kawg yog 40Gbps QSFP +, thiab lwm kawg yog plaub 10Gbps SFP +. Qhov kev sib txuas no decomposes ib 40G rau hauv plaub 10G. Hauv ntau qhov chaw DC uas twb muaj lawm, LC-MTP cables tau siv los txhawb cov pob txha loj ntawm cov keyboards, khib-mounted panels, thiab cov xaim hluav taws xob loj.
-
Anchoring Clamp PA3000
Anchoring cable clamp PA3000 yog qhov zoo thiab ruaj khov. Cov khoom no muaj ob ntu: cov hlau tsis muaj steel hlau thiab nws cov khoom tseem ceeb, lub cev muaj zog nylon uas yog lub teeb yuag thiab yooj yim nqa tawm sab nraum zoov. Lub clamp lub cev cov khoom yog UV yas, uas yog tus phooj ywg thiab muaj kev nyab xeeb thiab siv tau nyob rau hauv ib puag ncig tropical thiab yog dai thiab rub los ntawm electroplating steel hlau los yog 201 304 stainless-steel hlau. FTTH thauj tog rau nkoj clamp yog tsim los haum rau ntau yamADSS kabtsim thiab muaj peev xwm tuav cables nrog diameters ntawm 8-17mm. Nws yog siv rau ntawm qhov kawg-kawg fiber optic cables. Installing lub FTTH poob cable haumyog ib qho yooj yim, tab sis kev npaj ntawm luboptical kabyog yuav tsum tau ua ntej txuas nws. Qhov qhib nuv tus kheej-locking tsim ua rau kev teeb tsa ntawm cov ncej fiber ntau yooj yim dua. Lub thauj tog rau nkoj FTTX optical fiber ntau clamp thiabpoob hlau cable bracketsmuaj nyob rau nyias los yog ua ke raws li kev sib dhos.
FTTX nco cable thauj tog rau nkoj clamps tau dhau qhov kev ntsuas tensile thiab tau sim nyob rau hauv qhov kub ntawm -40 txog 60 degrees Celsius. Lawv kuj tau dhau qhov kev ntsuas kub ntawm kev caij tsheb kauj vab, kev kuaj kev laus, thiab kev ntsuas corrosion-resistant.
Yog tias koj tab tom nrhiav kev txhim khu kev qha, kev kub ceev fiber ntau optic cable daws, saib tsis pub dhau OYI. Hu rau peb tam sim no kom pom tias peb tuaj yeem pab koj txuas nrog thiab coj koj txoj kev lag luam mus rau qib tom ntej.
