0755-23179541
sales@oyii.net
Anchoring Clamp PA300
Hardware Products Overhead Line Fittings
Anchoring Clamp PA300
Likarolo tsa Sehlahisoa
1. Ts'ebetso e ntle ea anti-corrosion.
2. Ho khojoa le ho se mamelle.
3. Tlhokomelo-mahala.
4. Ho tšoara ka matla ho thibela thapo hore e se ke ea thella.
5. 'Mele o entsoe ka 'mele oa nylon, o bobebe ebile o bonolo ho o isa kantle.
6. Mohala oa tšepe o sa hloekang o tiisitse matla a tiileng a thata.
7. Lithako li entsoe ka thepa e hanyetsanang le boemo ba leholimo.
8. Ho kenya ha ho hloke lisebelisoa leha e le life tse khethehileng 'me nako ea ho sebetsa e fokotsehile haholo.
Litlhaloso
| Mohlala | Bophara ba Cable(mm) | Khaotsa Mojaro (kn) | Lintho tse bonahalang |
| OYI-PA300 | 4-7 | 2.7 | PA, Stainless Steel |
Lisebelisoa
1. Thapo e leketlileng.
2. Sisinya aloketseng ho koahela maemo a ho kenya lipalo.
3. Matla le lisebelisoa tsa mohala oa holimo.
4. FTTH fiber optic aerial cable.
Litaelo tsa ho Hloma
Li-clamp tsa anchoring bakeng sa lithapo tsa ADSS tse kentsoeng ka nako e khuts'oane (100 m max.)
Hokela sehokelo braketeng ea lipalo u sebelisa beile ea eona e tenyetsehang.
Beha 'mele oa clamp holim'a thapo le li-wedges li le ka morao.
Sututsa likhahla ka letsoho ho qala ho tšoara thapo.
Lekola boemo bo nepahetseng ba thapo pakeng tsa li-wedges.
Ha thapo e tlisoa moroalo oa eona oa ho kenya qetellong, li-wedges li fetela pele ho 'mele oa clamp.
Ha u kenya li-dead-end tse peli, tlohela nako e telele ea cable pakeng tsa li-clamps tse peli.
Litaba tsa ho paka
Qboleng: 100pcs / Outer lebokose.
1. Boholo ba Carton: 38 * 30 * 30cm.
2. N. Boima: 14.5kg / Outer Carton.
3. G. Boima: 15kg / Outer Carton.
4. Tšebeletso ea OEM e fumaneha ka bongata, e ka hatisa letšoao ka mabokoseng.
Packaging ka hare
Lebokose la Kantle
-
Mofuta o motona ho isa ho o motšehali ST Attenuator
OYI ST male-female attenuator plug mofuta o tsitsitseng oa lelapa la attenuator o fana ka ts'ebetso e phahameng ea mefuta e fapaneng e tsitsitseng ea likhokahano tsa maemo a indasteri. E na le mefuta e mengata ea ho nyenyefatsa, tahlehelo e tlase haholo ea ho khutla, ha e na maikutlo a polarization, 'me e na le ho pheta-pheta hantle. Ka bokhoni ba rona ba ho etsa moralo o kopantsoeng haholo le bokhoni ba ho etsa, phokotso ea mofuta oa SC attenuator ea banna le basali le eona e ka etsoa molemong oa ho thusa bareki ba rona ho fumana menyetla e metle. Attenuator ea rona e lumellana le matsapa a botala ba indasteri, joalo ka ROHS.
-
Letoto la Anchoring Clamp OYI-TA03-04
Cable ena ea OYI-TA03 le 04 e entsoe ka nylon e matla haholo le tšepe e sa hloekang ea 201, e loketseng likhoele tse chitja tse nang le bophara ba 4-22mm. Tšobotsi ea eona e kholo ka ho fetisisa ke moralo o ikhethang oa ho fanyeha le ho hula lithapo tsa boholo bo fapaneng ka chesele ea phetoho, e tiileng le e tšoarellang. Thethapo ya opticale sebelisoa ho Lithapo tsa ADSSle mefuta e fapaneng ea likhoele tsa optical, 'me ho bonolo ho e kenya le ho e sebelisa ka litšenyehelo tse phahameng. Phapang lipakeng tsa 03 le 04 ke hore lihoko tsa terata tse 03 ho tloha kantle ho ea kahare, ha 04 mofuta oa lihoko tsa tšepe tse pharaletseng ho tloha kahare ho ea kantle.
-
Lula Rod
Molamu ona oa ho lula o sebelisoa ho hokahanya terata ea ho lula le ankora ea fatše, e tsejoang hape e le setsi sa ho lula. E etsa bonnete ba hore terata e metse ka metso fatše 'me ntho e' ngoe le e 'ngoe e lula e tsitsitse. Ho na le mefuta e 'meli ea lithupa tsa ho lula tse fumanehang' marakeng: molamu oa ho lula oa seqha le molamu oa ho lula oa tubula. Phapang lipakeng tsa mefuta ena e 'meli ea lisebelisoa tsa mohala oa motlakase e ipapisitse le liqapi tsa tsona.
-
SFP+ 80km Transceiver
PPB-5496-80B ke plugable e chesang ea 3.3V Small-Form-Factor transceiver module. E etselitsoe ka ho hlaka bakeng sa lits'ebetso tsa puisano tsa lebelo le holimo tse hlokang litefiso ho fihla ho 11.1Gbps, e etselitsoe ho lumellana le SFF-8472 le SFP+ MSA. Lintlha tsa mojule li hokahana ho fihla ho 80km ho 9/125um fiber mode e le 'ngoe.
-
Duplex Patch Cord
OYI fiber optic duplex patch cord, eo hape e tsejoang e le fiber optic jumper, e entsoe ka thapo ea fiber optic e felisitsoeng ka likhokahanyo tse fapaneng ntlheng ka 'ngoe. Lithapo tsa fiber optic patch li sebelisoa libakeng tse peli tse kholo tsa ts'ebeliso: ho hokela lits'ebetso tsa komporo ho ea mabenkeleng le liphanele tsa patch kapa litsi tsa phano ea optical cross-connect. OYI e fana ka mefuta e fapaneng ea likhoele tsa patch ea fiber optic, ho kenyeletsoa mofuta o le mong, oa mefuta e mengata, mehala e mengata ea mantlha, e nang le li-armored patch, hammoho le li-pigtails tsa fiber optic le likhoele tse ling tse khethehileng tsa patch. Bakeng sa lithapo tse ngata tsa patch, li-connectors tse kang SC, ST, FC, LC, MU, MTRJ, DIN le E2000 (APC/UPC polish) lia fumaneha. Ho feta moo, re fana ka lithapo tsa patch tsa MTP/MPO.
-
24-48Port, 1RUI2RUCable Management Bar e kenyelelitsoe
1U 24 Ports (2u 48) Cat6 UTP Punch DownPatch Panel bakeng sa 10/100/1000Base-T le 10GBase-T Ethernet. Phanele ea patch ea 24-48 port Cat6 e tla emisa thapo ea 4-pair, 22-26 AWG, 100 ohm e sothehileng e sa sirelelitsoeng e nang le 110 punch down termination, e nang le mebala e mebala-bala bakeng sa wiring ea T568A/B, e fana ka 1G/10G-T e phethahetseng ea 1G/10G-T bakeng sa ts'ebeliso ea lentsoe kapa LAN kapa PoE + efe kapa efe.
Bakeng sa likhokahano tse se nang mathata, phanele ena ea patch ea Ethernet e fana ka likou tse otlolohileng tsa Cat6 tse nang le pheliso ea mofuta oa 110, e nolofalletsang ho kenya le ho tlosa likhoele tsa hau. Nomoro e hlakileng ka pele le ka morao eamarangrangpatch panel e thusa ho tsebahatsa ka potlako le ho bonolo ha li-cable runs bakeng sa taolo e nepahetseng ea sistimi. Lithaello tsa lithapo tse kenyellelitsoeng le sebaka sa taolo ea lithapo tse tlositsoeng li thusa ho hlophisa likhokahano tsa hau, ho fokotsa bohlasoa ba lithapo, le ho boloka ts'ebetso e tsitsitseng.
Haeba u batla tharollo ea thapo ea fiber optic e tšepahalang, e lebelo le holimo, se shebe hole ho feta OYI. Ikopanye le rona hona joale ho bona hore na re ka u thusa joang hore u lule u hokahane le ho isa khoebo ea hau boemong bo bong.