0755-23179541
sales@oyii.net.png)
8618926041961
Ikhebula le-Optic elihlomile i-GYFXTS
Ikhebula le-Optic elihlomile
I-GYFXTS
Izici Zomkhiqizo
1. Usayizi omncane nesisindo esincane, ukusebenza kahle kokumelana nokugoba kulula ukuyifaka.
2. Izinto zeshubhu ezikhululekile ezinamandla aphezulu ezisebenza kahle futhi ezimelana ne-hydrolysis, inhlanganisela ekhethekile yokugcwalisa amashubhu iqinisekisa ukuvikelwa okubalulekile kwefayibha.
3. Isigaba esigcwele sigcwele, ingaphakathi lekhebula ligoqwe ngobude nge-tape yepulasitiki yensimbi eboshiwe eqinisa umswakama.
4. Ingaphakathi lekhebula ligoqwe ngobude nge-tape yepulasitiki yensimbi eboshiwe ethuthukisa ukumelana nokuchotshozwa.
5. Zonke izinhlobo zokwakha ezivimba amanzi, zinikeza ukusebenza okuhle kwe-block engangeni umswakama kanye ne-block yamanzi.
6. Amashubhu akhululekile agcwele ijeli yokugcwalisa ahlinzeka kahle kakhului-fiber ebonakalayoisivikelo.
7. Ukulawulwa okuqinile kwezinto zobuciko kanye nezinto zokusetshenziswa kuvumela isikhathi sokuphila esingaphezu kweminyaka engama-30.
Imininingwane
Amakhebula aklanyelwe ikakhulukazi idijithali noma i-analogukuxhumana kokudluliselakanye nohlelo lokuxhumana lwasemakhaya. Imikhiqizo ifanele ukufakwa emoyeni, ukufakwa kwemigudu noma ukugqitshwa ngqo.
| IZINTO | INCAZELO | ||
| Inani Lefayibha | 2 ~ 16F | 24F | |
|
Ipayipi Elikhululekile | I-OD(mm): | 2.0 ± 0.1 | 2.5± 0.1 |
| Izinto: | I-PBT | ||
| Ihlomile | Itheyiphu yensimbi ye-Corrugation | ||
|
Umgodla | Ubukhulu: | Akukhona. 1.5 ± 0.2 mm | |
| Izinto: | PE | ||
| I-OD yekhebula (mm) | 6.8 ± 0.4 | 7.2 ± 0.4 | |
| Isisindo esiphelele (kg/km) | 70 | 75 | |
Imininingwane
UKUBONWA KWE-FIBER
| CHA. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Umbala Weshubhu |
Okuluhlaza okwesibhakabhaka |
iwolintshi |
Okuluhlaza okotshani |
Insundu |
I-Slate |
Okumhlophe |
Okubomvu |
Okumnyama |
Ophuzi |
I-Violet |
Opinki |
Amanzi |
| CHA. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Umbala wefayibha
CHA.
Umbala wefayibha |
Okuluhlaza okwesibhakabhaka |
iwolintshi |
Okuluhlaza okotshani |
Insundu |
I-Slate | Okumhlophe/ okwemvelo |
Okubomvu |
Okumnyama |
Ophuzi |
I-Violet |
Opinki |
Amanzi |
|
13. |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 | |
| Okuluhlaza okwesibhakabhaka +Iphuzu elimnyama | Orenji + Omnyama iphuzu | Okuluhlaza + Okumnyama iphuzu | Onsundu + Omnyama iphuzu | Ukuntuleka kwe-Slate+B iphuzu | Okumhlophe + Okumnyama iphuzu | Obomvu + Omnyama iphuzu | Okumnyama + Okumhlophe iphuzu | Ophuzi + Omnyama iphuzu | Uviolet+ Omnyama iphuzu | Opinki + Omnyama iphuzu | Amanzi+ Amnyama iphuzu |
I-FIBER YOKUBONISA
1. I-Fiber Yemodi Eyodwa
| IZINTO | AMAYUNITHI | ISICELO |
| Uhlobo lwefayibha |
| G652D |
| Ukuncipha | i-dB/km | 1310 nm≤ 0.36 1550 nm≤ 0.22 |
|
Ukuhlakazeka kwe-Chromatic |
ps/nm.km | 1310 nm≤ 3.5 1550 nm≤ 18 1625 nm≤ 22 |
| Ukuthambeka Okungasabalali Kakhulu | ps/nm2.km | ≤ 0.092 |
| Ubude be-Zero Dispersion | nm | 1300 ~ 1324 |
| Ubude be-Cut-off Wavelength (lcc) | nm | ≤ 1260 |
| Ukuncishiswa kwesisindo vs. Ukugoba (60mm x100turns) |
dB | (irediyasi engu-30 mm, izindandatho eziyi-100 )≤ 0.1 @ 1625 nm |
| Ububanzi Bensimu Yemodi | mm | 9.2 ± 0.4 ku-1310 nm |
| Ukugxila Okungaphakathi Kwe-Core-Clad | mm | ≤ 0.5 |
| Ububanzi be-Cladding | mm | 125 ± 1 |
| Ukumbozwa Ukungajikelezi Kwesigubhu | % | ≤ 0.8 |
| Ububanzi Bokumboza | mm | 245 ± 5 |
| Ukuhlolwa Kobufakazi | I-Gpa | ≥ 0.69 |
2. I-Multi Mode Fiber
| IZINTO | AMAYUNITHI | ISICELO | |||||||
| 62.5/125 | 50/125 | OM3-150 | OM3-300 | OM4-550 | |||||
| Ububanzi be-Fiber Core | μm | 62.5 ± 2.5 | 50.0 ± 2.5 | 50.0 ± 2.5 | |||||
| Ukungajikelezi kwe-Fiber Core | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |||||
| Ububanzi be-Cladding | μm | 125.0 ± 1.0 | 125.0 ± 1.0 | 125.0 ± 1.0 | |||||
| Ukumbozwa Ukungajikelezi Kwesigubhu | % | ≤ 2.0 | ≤2.0 | ≤ 2.0 | |||||
| Ububanzi Bokumboza | μm | 245 ± 10 | 245 ± 10 | 245 ± 10 | |||||
| Ukuzinza Okugqokwe Ngejazi | μm | ≤ 12.0 | ≤ 12.0 | ≤12.0 | |||||
| Ukumboza Ukungajikelezi Kwesiyingi | % | ≤ 8.0 | ≤ 8.0 | ≤ 8.0 | |||||
| Ukugxila Okungaphakathi Kwe-Core-Clad | μm | ≤ 1.5 | ≤ 1.5 | ≤ 1.5 | |||||
|
Ukuncipha | 850nm | i-dB/km | 3.0 | 3.0 | 3.0 | ||||
| 1300nm | i-dB/km | 1.5 | 1.5 | 1.5 | |||||
|
I-OFL |
850nm | MHz﹒ km |
≥ 160 |
≥ 200 |
≥ 700 |
≥ 1500 |
≥ 3500 | ||
|
1300nm | MHz﹒ km |
≥ 300 |
≥ 400 |
≥ 500 |
≥ 500 |
≥ 500 | |||
| I-theory enkulu kunazo zonke yokuvula izinombolo | / | 0.275 ± 0.015 | 0.200 ± 0.015 | 0.200 ± 0.015 | |||||
Ukusebenza Kwekhebula Kwemishini Nezemvelo
| CHA. | IZINTO | INDLELA YOKUHLOLA | IZINTO EZIFANELE ZOKUMUKELA |
|
1 |
Ukuhlolwa Kokulayisha Okuqinile | #Indlela yokuhlola: IEC 60794-1-E1 -. Umthwalo oqinile isikhathi eside: 500 N -. Umthwalo omfushane wokudonsa: 1000 N -. Ubude bekhebula: ≥ 50 m | -. Ukwenyuka kokuncipha @ 1550 nm: ≤ 0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
2 |
Ukuhlolwa Kokumelana Nokuchotshozwa | #Indlela yokuhlola: IEC 60794-1-E3 -.Umthwalo omude: 1000 N/100mm -.Umthwalo omfushane: 2000 N/100mm Isikhathi sokulayisha: 1 imizuzu | -. Ukwenyuka kokuncipha @ 1550 nm: ≤ 0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
3 |
Ukuhlolwa Kokumelana Nomthelela | #Indlela yokuhlola: IEC 60794-1-E4 -.Ukuphakama komthelela: 1 m -.Isisindo somthelela: 450 g -.Iphuzu lomthelela: ≥ 5 -.Imvamisa yomthelela: ≥ 3/iphuzu | -. Ukwenyuka kokuncipha @ 1550 nm: ≤ 0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
4 |
Ukugoba Okuphindaphindiwe | #Indlela yokuhlola: IEC 60794-1-E6 -.Ububanzi be-Mandrel: 20 D (D = ububanzi bekhebula) -.Isisindo sesihloko: 15 kg -.Imvamisa yokugoba: izikhathi ezingu-30 -.Isivinini sokugoba: 2 s/isikhathi |
-. Ukwenyuka kokuncipha @ 1550 nm: ≤ 0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
5 |
Ukuhlolwa Kokugoba | #Indlela yokuhlola: IEC 60794-1-E7 -.Ubude: 1 m -.Isisindo sesihloko: 25 kg -.I-engeli: ± 180 degrees -.Imvamisa: ≥ 10/iphuzu | -. Ukwenyuka kokuncipha kwe-Attenuation@1550 nm: ≤0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
6 |
Ukuhlolwa Kokungena Emanzini | #Indlela yokuhlola: IEC 60794-1-F5B -.Ukuphakama kwekhanda lokucindezela: 1 m -.Ubude besampula: 3 m -.Isikhathi sokuhlola: amahora angama-24 |
-. Akukho ukuvuza ngentambo evulekile |
|
7 |
Ukuhlolwa Kokujikeleza Kwezinga Lokushisa | #Indlela yokuhlola: IEC 60794-1-F1 -.Izinyathelo Zokushisa: + 20℃, - 40℃, + 70℃, + 20℃ -. Isikhathi Sokuhlola: amahora angu-24/isinyathelo -.Inkomba yomjikelezo: 2 | -. Ukwenyuka kokuncipha @ 1550 nm: ≤ 0.1 dB -. Akukho ukuqhekeka kwejakethi nokuphuka kwefayibha |
|
8 |
Ukusebenza Kokwehla | #Indlela yokuhlola: IEC 60794-1-E14 -.Ubude bokuhlola: 30 cm -.Ibanga lokushisa: 70 ±2℃ -. Isikhathi Sokuhlola: amahora angama-24 |
-. Akukho ukulahlwa kwenhlanganisela yokugcwalisa |
|
9 |
Izinga lokushisa | Ukusebenza: -40℃~+70℃ Isitolo/Ezokuthutha: -40℃~+70℃ Ukufakwa: -20℃~+60℃ | |
I-RADIUS YOKUGOBA KWECABLE YE-FIBER OPTIC
Ukugoba okuqinile: ≥ izikhathi eziyi-10 kunobubanzi bokuphuma kwekhebula
Ukugoba okunamandla: ≥ izikhathi ezingu-20 kunobubanzi bokuphuma kwekhebula.
IPHAKHEJI NOMAMAKI
1. Iphakheji
Akuvunyelwe amayunithi amabili ubude bekhebula esigubheni esisodwa, iziphetho ezimbili kufanele zivalwe, Iziphetho ezimbili kufanele zipakishwe ngaphakathi kwesigubheni, ubude bekhebula obungadluli amamitha amathathu.
2. UMark
Uphawu Lwekhebula: Uhlobo, Uhlobo lwekhebula, Uhlobo lwefayibha kanye nokubalwa kwayo, Unyaka wokwenziwa, Uphawu lobude.
UMBIKO WOKUHLOLA
Umbiko wokuhlolwa kanye nesitifiketi kuzobainikezwa uma kudingeka.
-
Ibhokisi Letheminali le-OYI-FAT12B
Ibhokisi le-OYI-FAT12B optical terminal eliyi-12-core lisebenza ngokuhambisana nezidingo ezijwayelekile zemboni ze-YD/T2150-2010. Lisetshenziswa kakhulu kusixhumanisi se-terminal sesistimu yokufinyelela ye-FTTX. Ibhokisi lenziwe nge-PC enamandla aphezulu, i-ABS plastic alloy injection molding, enikeza ukuvala okuhle nokumelana nokuguga. Ngaphezu kwalokho, lingalengiswa odongeni ngaphandle noma ngaphakathi ukuze lifakwe futhi lisetshenziswe. Ibhokisi le-OYI-FAT12B optical terminal linomklamo wangaphakathi onesakhiwo esinesendlalelo esisodwa, esihlukaniswe endaweni yomugqa wokusabalalisa, ukufakwa kwekhebula langaphandle, ithreyi yokufaka ifayibha, kanye nesitoreji sekhebula le-FTTH drop optical. Imigqa ye-fiber optic icacile kakhulu, okwenza kube lula ukuyisebenzisa nokunakekela. Kunezimbobo zekhebula ezimbili ngaphansi kwebhokisi ezingamukela izintambo ze-optical ezimbili zangaphandle ze-junctions eziqondile noma ezihlukene, futhi zingamukela nezintambo ze-optical ze-12 FTTH drop optical zokuxhuma kokuphela. Ithreyi yokufaka ifayibha isebenzisa ifomu lokujika futhi ingalungiswa ngomthamo wama-cores ayi-12 ukuze ivumelane nokwandiswa kokusetshenziswa kwebhokisi. -
I-OYI-ODF-MPO RS144
I-OYI-ODF-MPO RS144 1U iyiphaneli ye-fiber optic patch enesisindo esikhulu eyenziwe ngezinto zensimbi eziqoqwayo ezibandayo zekhwalithi ephezulu, ubuso bufakwe i-electrostatic powder spray. I-sliding type 1U ukuphakama kokusetshenziswa okufakwe ku-rack okungamasentimitha angu-19. Inamathreyi e-sliding epulasitiki angu-3, ithreyi ngayinye esliding inamakhasethi e-MPO angu-4. Ingalayisha amakhasethi e-MPO angu-12pcs HD-08 ukuze kube nokuxhumeka nokusatshalaliswa kwefayibha okungu-144. Kukhona ipuleti lokuphatha ikhebula elinezimbobo zokulungisa ngemuva kwephaneli ye-patch. -
Uhlobo lwe-OYI-OCC-C
I-Fiber optic distribution terminal iyithuluzi elisetshenziswa njengedivayisi yokuxhumanisa kunethiwekhi yokufinyelela ye-fiber optic yekhebula le-feeder kanye nekhebula lokusabalalisa. Izintambo ze-Fiber optic zixhunywa ngqo noma ziqedwe futhi ziphathwe ngezintambo ze-patch ukuze zisatshalaliswe. Ngokuthuthukiswa kwe-FTTX, amakhabethe okuxhumanisa ikhebula langaphandle azosetshenziswa kabanzi futhi asondele kumsebenzisi wokugcina. -
Uhlobo lwe-OYI-ODF-SR-Series
Iphaneli yekhebula le-optical fiber yohlobo lwe-OYI-ODF-SR-Series isetshenziselwa ukuxhumana kwe-cable terminal futhi ingasetshenziswa njengebhokisi lokusabalalisa. Inesakhiwo esijwayelekile esingu-19″ futhi ifakwe e-rack ngesakhiwo sedrowa. Ivumela ukudonsa okuguquguqukayo futhi kulula ukuyisebenzisa. Ifanele ama-adapter e-SC, LC, ST, FC, E2000, nokuningi. Ibhokisi le-optical cable terminal elifakwe e-rack liyidivayisi ephela phakathi kwezintambo ze-optical kanye nemishini yokuxhumana ye-optical. Inemisebenzi yokuhlanganisa, ukuqeda, ukugcina, kanye nokubopha izintambo ze-optical. I-SR-series sliding rail enclosure ivumela ukufinyelela okulula ekuphathweni kwe-fiber kanye nokuhlanganisa. Isisombululo esiguquguqukayo esitholakala ngobukhulu obuhlukahlukene (1U/2U/3U/4U) kanye nezitayela zokwakha i-backbones, izikhungo zedatha, kanye nezinhlelo zokusebenza zebhizinisi. -
Uhlobo lwepeni lokuhlanza i-Fiber Optic 2.5mm
Ipeni lokuhlanza i-fiber optic elichofozwa kanye lilula ukulisebenzisa futhi lingasetshenziswa ukuhlanza izixhumi kanye namakhola angu-2.5mm avele obala ku-adaptha yekhebula le-fiber optic. Mane nje ufake isihlanzi ku-adaptha bese usicindezela uze uzwe "ukuchofoza". Isihlanzi sokusunduza sisebenzisa umsebenzi wokusunduza ngomshini ukusunduza iteyipu yokuhlanza yezinga lokukhanya ngenkathi sizungezisa ikhanda lokuhlanza ukuqinisekisa ukuthi indawo yokugcina i-fiber iyasebenza kodwa ihlanzekile kancane. -
Ikhebula Lokukhipha Umlomo Wezinhloso Eziningi GJBFJV(GJBFJH)
Izinga le-optical elisebenziseka ngezindlela eziningi lokuxhuma izintambo lisebenzisa ama-subunit (900μm tight buffer, i-aramid yarn njengelungu lamandla), lapho iyunithi ye-photon ibekwe khona engxenyeni yokuqinisa ephakathi engeyona eyensimbi ukuze yakhe ingxenye yekhebula. Ingqimba engaphandle ikhishwa ibe yinto engenantuthu ephansi (LSZH, intuthu ephansi, intuthu engenalo i-halogen, i-flame retardant). (PVC)
Uma ufuna ikhambi lekhebula le-fibre optic elithembekile nelishesha kakhulu, ungabheki kude ne-OYI. Xhumana nathi manje ukuze ubone ukuthi singakusiza kanjani ukuthi uhlale uxhumekile futhi uthuthukise ibhizinisi lakho liye ezingeni elilandelayo.
